MuxLab 500850 Bedienungsanleitung
KVM HDMI over IP PoE Extender Deluxe, 4K30
Quick Installation Guide
500850
© MuxLab Inc. 2023 1 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
Table of Contents
1. Safety Precautions....................................................................................................................................................3
2. Introduction................................................................................................................................................................4
3. Features.......................................................................................................................................................................4
4. Package Contents...................................................................................................................................................4
5. Specifications............................................................................................................................................................5
6. Installation Procedures..........................................................................................................................................6
7. Troubleshooting.........................................................................................................................................................7
8. Application Diagram..............................................................................................................................................8
© MuxLab Inc. 2023 2 94-001012-A/SE-001012-A
1. Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before
using the device. Save this manual for future reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or
burns.
Do not open or remove the housing of the device as you may be exposed to dangerous
voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install
this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by
overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general household waste,
please treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated
without the express permission of MuxLab Inc. Product specifications and information in this
document are for reference only, and the content may be updated from time to time without
prior notice.
© MuxLab Inc. 2023 3 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
3. Features
Supports HDMI up to 4K @ 30Hz (4:4:4) and4K @ 60Hz (4:2:0)
Up to 330ft (100m) over Cat5e/6
One operator can manage multiple servers/workstations
Receiver side includes a 4-port USB hub,for KVM applications
HDMI loop out on TX
HDMI local input on RX
100 channel selector
Supports multiple point-to-point, and point-to-multipoint applications
Supports PoE powered
Supports balanced/unbalanced audio insert (TX), and balanced/unbalanced audio
extract (RX)
2. Introduction
The KVM HDMI over IP PoE Extender Deluxe, 4K/30 allows HDMI & USB equipment to be
connected up to 330ft (100m) over an Ethernet LAN, supports HDMI up to 4K @ 30Hz (4:4:4)
and 4K @ 60Hz (4:2:0) via Cat5e/6 cable in multiple point-to-point and point-to-multipoint
configurations. The Transmitter (500850-TX) and Receiver (500850-RX) support PoE (PD) if
used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The
Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse,
printer, drawing pad, storage device, etc., via a 4 port USB hub. In addition, The Transmitter
features an HDMI loop out for connecting a local TV and the Receiver features an HDMI input
for connecting a local video source.
4. Package Contents
One (1) KVM HDMI over IP PoE Extender Deluxe, 4K30 (Transmitter or Receiver)
One (1) IR Sensor
One (1) IR Emitter
One (1) User manual (available via download)
Notes: Confirm that the product and accessories are all included. If not, please contact the
supplier from which you purchased the unit.
© MuxLab Inc. 2023 4 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
5. Specifications
© MuxLab Inc. 2023 5 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
Enviroment HDMI 2.0a
HDCP 1.4, HDCP 2.2
297MHz
Up to 4K/30Hz (4:4:4) or 4K/60Hz (4:2:0)
JPEG 2000
Typical one (1) Frame: 16ms for 60Hz and 33ms for 30Hz
1000BaseT with PoE
Technical
HDCP Compliance
Bandwidth (HDMI)
Video Resolution
Maximum Distance
Latency
Network Requirement
HDR10HDR Color
Cat5e/6: 330ft (100m)
Compresion
Bandwidth Up to 500Mbps
Connection
Transmitter
1 x HDMI IN [Type A, 19-pin female]
1 x Audio Input [5pin-3.81mm Phoenix jack]
1 x HDMI Loopout [Type A, 19-pin female]
1 x Ethernet LAN port [RJ45, 8-pin connector]
1 x IR Sensor [3.5mm Stereo Mini-jack]
1 x IR Emitter [3.5mm Stereo Mini-jack]
1 x RS-232 [3pin-3.81mm Phoenix jack]
1 x USB HOST [USB Type C]
Input:
Outputs:
Controls:
Receiver
Inputs:
Outputs:
Controls:
1 x HDMI IN [Type A, 19-pin female]
1 x Ethernet LAN port [RJ45, 8-pin female]
1 x HDMI OUT [Type A, 19-pin female]
1 x Audio Output [5pin-3.81mm Phoenix jack]
1 x IR Sensor [3.5mm Stereo Mini-jack]
1 x IR Emitter [3.5mm Stereo Mini-jack]
1 x RS-232 [3pin-3.81mm Phoenix jack]
4 x USB DEVICES [USB Type A]
Mechanical
Generic Specification
Housing Metal Enclosure
Color Black
Dimensions (WxDxH) Transmitter/Receiver: 163mm x 107mm x 23mm
Weight Transmitter: 485.3g, Receiver: 494.4g
Power Consumption Transmitter: 5 Watt Receiver: 7 Watt
PoE Standard IEEE 802.3af
Operating Temperature 32 - 104°F / 0 - 40°C
Storage Temperature -4 - 140°F / -20 - 60°C
Relative Humidity 20~90% RH (non-condensing)
Compliance
Warranty
Order Information
Regulatory: FCC, CE, RoHS
3 years
500850-TX KVM HDMI over IP PoE Transmitter Deluxe, 4K/30 (UPC:627699908501)
RS-232 Up to 115k Baud
IR Bi-Directional
500850-RX KVM HDMI over IP PoE Receiver Deluxe, 4K/30 (UPC:627699808504)
6. Installation Procedures
© MuxLab Inc. 2023 6 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
Identification of Connectors:1.
Identify connectors on the Transmitter and Receiver based on product labels.
Refer to front and rear product views for connector details.
Distance Verification:2.
Verify that the distance between HDMI Transmitter and Receiver complies with
MuxLab specifications.
Transmitter Installation:3.
Connect Transmitter to computer server/workstation HDMI video source using an
HDMI-compliant cable.
Connect Transmitter USB Port to computer server/workstation USB port using a
compliant Type A to Type C USB Cable.
Connect computer audio-out to Transmitter audio-in if required.
For point-to-point application, connect one Cat 5e/6 cable to the RJ45 LAN
connector on the Transmitter.
If transmitting over the network, use an Ethernet Switch between Transmitter and
Receiver.
Receiver Installation:4.
Connect Receiver HDMI port to Monitor HDMI port using an HDMI-compliant cable.
Connect two Receiver USB 1.1 ports to a USB keyboard and mouse.
Connect two Receiver USB 2.0 ports to other USB devices (printer, drawing pad,
storage device, etc).
Connect Receiver audio-out to amplified speaker if required.
For point-to-point application, connect one Cat 5e/6 cable from the Transmitter to
the RJ45 LAN connector on the Receiver.
If transmitting over the network, use an Ethernet Switch between Transmitter and
Receiver.
Multiple Point-to-Point Configuration:5.
Use an Ethernet Switch with Gigabit ports, DHCP Server, and Jumbo Frame support.
Verify correct configuration of the Ethernet Switch, enable DHCP Server, and enable
Jumbo Frame.
Connect all Transmitters and Receivers to the Ethernet Switch.
Use the Up and Down buttons located on the right side of the display to assign a
unique device ID for each transmitter.
Configure each Receiver Device ID to correspond with the selected Transmitter.
Skip this step if using MuxLab ProDigital Network Controller (500812).
IR and RS232 Ports:6.
The Transmitter and Receiver support bi-directional IR and RS232 ports for control
signals if required.
7. Troubleshooting
The following table describes some of the symptoms, probable causes and possible solutions
in regard to the installation of the KVM HDMI over IP PoE Extender Deluxe, 4K30 :
If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at
877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).
© MuxLab Inc. 2023 7 94-001012-A/SE-001012-A
KVM HDMI over IP PoE Extender Deluxe, 4K30
7. Powering:
Power Transmitter/Receiver via external supply if PoE is unavailable.
Connect a 5 VDC power supply (500993, sold separately) to each transmitter and
each receiver.
Connect all power supplies to AC outlets after all connections are made.
Ensure blue power LED on each Transmitter and Receiver illuminates.
8. Verification:
Power on HDMI equipment and verify image quality, sound, keyboard and mouse
functionality, and other USB-connected devices.
9. Reference Manual:
Download and reference the 500850 Operation Manual from the MuxLab website
for further instructions.
10. Diagram:
Refer to the provided diagram for a typical KVM LAN configuration.
KVM HDMI over IP PoE Extender Deluxe, 4K30
500850
Follow us:
2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:
514-905-0589 | Toll free: 1-877-689-5228 [email protected] |
[email protected] | www.muxlab.com
8. Application Diagram
KVM HDMI over IP PoE Extender Deluxe, 4K30
Inhaltsverzeichnis
Andere MuxLab Extender Handbücher
MuxLab
MuxLab 500458-ARC Bedienungsanleitung
MuxLab
MuxLab 500752 Bedienungsanleitung
MuxLab
MuxLab 500771 Bedienungsanleitung
MuxLab
MuxLab 500417 Bedienungsanleitung
MuxLab
MuxLab Pro Digital 500452 Bedienungsanleitung
MuxLab
MuxLab 500464 Bedienungsanleitung
MuxLab
MuxLab 500760-KVM Bedienungsanleitung
MuxLab
MuxLab 500464-V2 Bedienungsanleitung
MuxLab
MuxLab 500759 Bedienungsanleitung
MuxLab
MuxLab 500114 Bedienungsanleitung
MuxLab
MuxLab 500459 Bedienungsanleitung
MuxLab
MuxLab 500450-LR Bedienungsanleitung
MuxLab
MuxLab 500754 Bedienungsanleitung
MuxLab
MuxLab 500140 Bedienungsanleitung
MuxLab
MuxLab 500733 Bedienungsanleitung
MuxLab
MuxLab 500465 Bedienungsanleitung
MuxLab
MuxLab 500453 Bedienungsanleitung
MuxLab
MuxLab 500732 Bedienungsanleitung
MuxLab
MuxLab 500771 Bedienungsanleitung
MuxLab
MuxLab 500041-WP-UK Bedienungsanleitung
Beliebte Extender Handbücher anderer Marken
foxunhd
foxunhd SX-AEX01 Bedienungsanleitung
TERK Technologies
TERK Technologies LFIRX2 Bedienungsanleitung
Devolo
Devolo Audio Extender Handbuch
Edimax
Edimax EW-7438RPn V2 Bedienungsanleitung
Shinybow USA
Shinybow USA SB-6335T5 Bedienungsanleitung
SECO-LARM
SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung