Narcissus S861 Bedienungsanleitung
Repeat twice or more
Pull Back
Pull Back
The LOGO faces youInstructions for Sharpen Knives1. PreparationSteps:1) Place a piece of paper on the countertop to collect debris.2) Put the sharpener on the paper. The Narcissus LOGO2. Sharpen the Knife & Remove the Burrs3) Clean and dry the knives. 4) Connect the power supply and the sharpener to the adapter.5) Turn on the switch on the left.must face you.Tips:1) The sharpener must be placed in the correct direction.2) Use the sharpener with the specific voltage of 110-240V~50/60Hz.Steps:1) Hold the left side of the sharpener with your hand. Put the knife into one of the grindinggrooves. Pull back about 1 inch/sec until the blade completely passes through.above, sharpen the other side of the blade.3) Repeat the two steps above twice or more to make the knife sharp enough.2) Change the knife to another grinding groove. Following the same method explainedTips:2) Don’t use your body to test whether the blade is sharp.1) Don’t push knives forward to avoid damage to knives.4) Quickly pass the knife through the two grooves to remove the burrs on the blade.3) The sharpener is unsuitable for grinding thick, ceramic, curved, or zigzag tools.
2. Remove grease and water from knives before sharpening. 3. Don’t add water, oil, or other substances when sharpening knives to4. The sharpener is unsuitable for grinding thick, ceramic, curved, or zigzag6. If knives stop the grinding wheel, remove knives immediately to avoiddamage to the sharpener.Precautions9. The sharpener sometimes gives off a pungent smell. Also, there will besparks when sharpening. Kindly rest assured that this is normal.7. Prevent children from using or touching to avoid accidents.1. Use the sharpener with the specific voltage of 110-240V~50/60Hz. 8. The sharpener must be kept in a dry area and away from high temperatures.5. Don’t allow water to flow into the sharpener to avoid damage. avoid danger.tools.Cleaning and Maintenance1. Open the crumb bin at the bottom and wipe the crumbs after each use.2. Unplug before cleaning.3. Wipe the surface with a clean soft cloth. 4. Don’t immerse the sharpener in water.5. Store the sharpener in a dry and ventilated place.Crumb Bin
TroubleshootingProduct ProblemNot WorkingCheck the power supply.Clean the debris before sharpening. Debris in the Grooves Knife ScratchFlatten the knife before sharpening. The Knife is CurvedThe Narcissus LOGO must face you. Pull back instead of pushing forward. Wrong DirectionPossible ReasonProblemSolutionthe KnifeCan’t SharpenNot Enough GrindingGrind more times. Drag slowly.
Unsuitable KnivesUnsuitable for thick, ceramic, curved,zigzag knives.Wheel DeviationContact Narcissus for a free replacement.
No PowerMotor OverheatWait 15 minutes before using again. Please contact us via email at [email protected], if the problem still exists orthere are other problems.WarrantyThanks for choosing and supporting Narcissus. Narcissus provides all customers with 12 months free product-contact us via email at [email protected]. We will provideyou with a satisfying solution.Thank you for understanding!Made in ChinaManufacturer: Foshan Taobei Technology Co., Ltd.Address: No.1 Guizhou Avenue West, Foshan, GD, ChinaModel: S861Package Size: 7.1*2.8*3.9 inOfficial Email: [email protected]Gross Weight: 0.72 lbsRated Voltage: 110-240V~50/60HzRated Power: 10WSpecificationDon’t squeeze the wheel hard. Different IntensityAsymmetricBladeDon’t let the knife stands still. Over-grindingBlade ChippedSharpeningBlocked WhileContact Narcissus for a free replacement.replacement services. If there is any quality problem, please
Andere Narcissus Zubehör Handbücher
