National Instruments SCXI-1353 Bedienungsanleitung

National Instruments™, NI™,ni.com™, and SCXI™are trademarks of National Instruments Corporation. Product and company names mentioned herein

are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location:

Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.

INSTALLATION GUIDE

SCXI -1353 SHIELDED CABLE ASSEMBLY

This guide describes how to install the National Instruments SCXI-1353

shielded cable assembly between a 100-pin E Series data acquisition

(DAQ) device and two SCXI modules. The SCXI-1353 consists of an

SH1006868 cable, an SCXI-1349 shielded cable adapter, and an

AI-48/DIO-24 adapter.

Introduction

The SCXI-1353 makes a low-noise, long-distance connection between

a 100-pin E Series DAQ device and two SCXI modules. The SH1006868

cable is available in lengths of 1, 2, 5, and 10 m. The SH1006868 cable

is Y-shaped, with a 100-pin male connector and two 68-pin female

connectors. One branch of the cable is labeled MIO-16, and the other

branch is labeled EXTENDED I/O.

The 100-pin connector of the cable attaches to a 100-pin E Series DAQ

device. The 68-pin connector on the MIO-16 branch of the cable attaches

to an SCXI-1349. The 68-pin connector on the EXTENDED I/O branch of

the cable attaches to an AI-48/DIO-24. The SCXI-1349 and AI-48/DIO-24

can attach to a variety of SCXI modules. Both these adapters have breakout

connectors that you can use to connect to other SCXI accessories, such as

the SCXI-1180 and the SCXI-1351.

What You Need to Get Started

To install and use the SCXI-1353, you need the following items:

❑SCXI-1353 shielded cable assembly (included in this kit)

– SH1006868 cable

– SCXI-1349 shielded cable adapter

– AI-48/DIO-24 adapter

❑SCXI chassis

™

SCXI-1353 Shielded Cable Assembly 2 ni.com

❑100-pin E Series DAQ device

❑Two SCXI modules

Note Refer to the Connections and Pin Assignments section for the SCXI modules that

you can use with each 100-pin E Series DAQ device.

❑Computer

❑Four small screws (included in this kit)

❑Two cable tie wraps

❑SCXI-1353Shielded Cable InstallationGuide

❑Small Phillips screwdriver

❑Small flat-blade screwdriver

Conventions

The following conventions are used in this guide:

bold Bold text denotes items that you must select or click on in the software,

such as menu items and dialog box options. Bold text also denotes

parameter names.

This icon denotes a note, which alerts you to important information.

italic Italic text denotes variables, emphasis, a cross reference, or an introduction

to a key concept. This font also denotes text that is a placeholder for a word

or value that you must supply.

monospace Text in this font denotes text or characters that you should enter from the

keyboard, sections of code, programming examples, and syntax examples.

This font is also used for the proper names of disk drives, paths, directories,

programs, subprograms, subroutines, device names, functions, operations,

variables, filenames and extensions, and code excerpts.

©National Instruments Corporation 3 SCXI-1353 Shielded Cable Assembly

Safety Information

The following section contains important safety information that you must

follow when installing and using the product.

Do not operate the product in a manner not specified in this document.

Misuse of the product can result in a hazard. You can compromise the

safety protection built into the product if the product is damaged in any

way. If the product is damaged, return it to National Instruments for repair.

Do not substitute parts or modify the product except as described in this

document. Use the product only with the chassis, modules, accessories, and

cables specified in the installation instructions. You must have all covers

and filler panels installed during operation of the product.

Do not operate the product in an explosive atmosphere or where there may

be flammable gases or fumes. Operate the product only at or below the

pollution degree stated in the Specifications section. Pollution is foreign

matter in a solid, liquid, or gaseous state that can reduce dielectric strength

or surface resistivity. The following is a description of pollution degrees:

• Pollution degree 1 means no pollution or only dry, nonconductive

pollution occurs. The pollution has no influence.

• Pollution degree 2 means that only nonconductive pollution occurs in

most cases. Occasionally, however, a temporary conductivity caused

by condensation must be expected.

• Pollution degree 3 means that conductive pollution occurs, or dry,

nonconductive pollution occurs that becomes conductive due to

condensation.

Clean the product with a soft nonmetallic brush. Make sure that the product

is completely dry and free from contaminants before returning it to service.

You must insulate signal connections for the maximum voltage for which

the product is rated. Do not exceed the maximum ratings for the product.

Remove power from signal lines before connecting them to or

disconnecting them from the product.

Operate this product only at or below the installation category stated in the

Specifications section.

The installation category for this device, installation category I, is for

measurements performed on circuits not directly connected to MAINS1.

1 MAINS is defined as the electricity supply system to which the equipment concerned is designed to be connected either for

powering the equipment or for measurement purposes.

SCXI-1353 Shielded Cable Assembly 4 ni.com

This category is a signal level such as voltages on a printed wire board

(PWB) on the secondary of an isolation transformer.

Examples of installation category I are measurements on circuits not

derived from MAINS and specially protected (internal) MAINS-derived

circuits.

Installing the SCXI-1353 Shielded Cable Assembly

Perform the following steps to install the SCXI-1353. Refer to Figure 1 for

the installation procedure.

Figure 1. SCXI-1353 Installation

1. Turn off the computer and SCXI chassis.

2. Install the SCXI modules in the SCXI chassis following the

instructions in the module user manual.

1 SCXI Modules

2 SCXI-1349 Shielded Cable Adapter

3 MIO-16 Cable

4 AT-MIO E Series DAQ Device

5 Extended I/O Cable

6 AI-48/DIO-24 Adapter

©National Instruments Corporation 5 SCXI-1353 Shielded Cable Assembly

3. Insert the 50-pin female connector on the rear of the SCXI-1349 into

the rear signal connector of the SCXI module that passes analog

signals to the 100-pin E Series DAQ device.

4. Screw the rear panel of the SCXI-1349 to the threaded strips in the rear

of the SCXI chassis to secure the adapter.

5. Connect the end of the cable labeled MIO-16 to the 68-pin connector

of the SCXI-1349.

6. Insert the 50-pin female connector on the rear of the AI-48/DIO-24

into the rear signal connector of the SCXI module or feedthrough panel

that connects to pins 51–100 of the DAQ device.

7. Screw the rear panel of the AI-48/DIO-24 to the threaded strips in the

rear of the SCXI chassis to secure the adapter.

8. Connect the end of the cable labeled EXTENDED I/O to the 68-pin

connector of the AI-48/DIO-24.

9. Connect the 100-pin end of the cable to the I/O connector of the DAQ

device.

10. Use the tie wraps to secure the cable to a fixed object to relieve the

strain on the cable. Strain relief is necessary because the SCXI-1353

has a long, stiff backshell that can exert leverage on the DAQ device

connector.

Connections and Pin Assignments

Table 1 lists the pin assignments for connections between the 100-pin

E Series DAQ device and the MIO-16 cable. Table 2 lists the pin

assignments for connections between the 100-pin E Series DAQ device and

the EXTENDED I/O cable. The 100-pin E Series DAQ device you use

determines which SCXI modules you can use with the SCXI-1353.

Table 1. MIO-16 Cable Connections

Signal Names Connector Pin Numbers

100-Pin E Series Device 100-Pin 50-Pin 68-Pin

AIGND 1, 2 1, 2 24, 27, 29, 32, 56, 59, 64, 67

ACH0 3 3 68

ACH8 4 4 34

ACH1 5 5 33

ACH9 6 6 66

ACH2 7 7 65

SCXI-1353 Shielded Cable Assembly 6 ni.com

ACH10 8 8 31

ACH3 9 9 30

ACH11 10 10 63

ACH4 11 11 28

ACH12 12 12 61

ACH5 13 13 60

ACH13 14 14 26

ACH6 15 15 25

ACH14 16 16 58

ACH7 17 17 57

ACH15 18 18 23

AISENSE 19 19 62

DAC0OUT 20 20 22

DAC1OUT 21 21 21

EXTREF 22 22 20

AOGND 23 23 54, 55

DGND 24, 33 24, 33 4, 7, 9, 12, 13, 15, 18,

35, 36, 39, 44, 50, 53

DIO0 25 25 52

DIO4 26 26 19

DIO1 27 27 17

DIO5 28 28 51

DIO2 29 29 49

DIO6 30 30 16

DIO3 31 31 47

DIO7 32 32 48

+5V 34, 35 34, 35 8, 14

Table 1. MIO-16 Cable Connections (Continued)

Signal Names Connector Pin Numbers

100-Pin E Series Device 100-Pin 50-Pin 68-Pin

©National Instruments Corporation 7 SCXI-1353 Shielded Cable Assembly

SCANCLK 36 36 46

EXTSTROBE* 37 37 45

PFI0/TRIG1 38 38 11

PFI1/TRIG2 39 39 10

PFI2/CONVERT* 40 40 43

PFI3/GPCTR1_SOURCE 41 41 42

PFI4/GPCTR1_GATE 42 42 41

GPCTR1_OUT 43 43 40

PFI5/UPDATE* 44 44 6

PFI6/WFTRIG 45 45 5

PFI7/STARTSCAN 46 46 38

PFI8/GPCTR0_SOURCE 47 47 37

PFI9/GPCTR0_GATE 48 48 3

GPCTR0_OUT 49 49 2

FREQ_OUT 50 50 1

Pins 1 through 9 and pins 35 through 43 on the 68-pin connector are not connected.

Table 2. Extended I/O Cable Connections

Signal Names Connector Pin Numbers

NI 6031E, NI 6033E,

NI 6061E, NI 6071E NI 6021E, NI 6025E 100-Pin 50-Pin 68-Pin

ACH16 PC7 51 168

ACH24 GND 52 234

ACH17 PC6 53 333

ACH25 GND 54 467

ACH18 PC5 55 532

ACH26 GND 56 666

ACH19 PC4 57 765

Table 1. MIO-16 Cable Connections (Continued)

Signal Names Connector Pin Numbers

100-Pin E Series Device 100-Pin 50-Pin 68-Pin

SCXI-1353 Shielded Cable Assembly 8 ni.com

ACH27 GND 58 831

ACH20 PC3 59 930

ACH28 GND 60 10 64

ACH21 PC2 61 11 29

ACH29 GND 62 12 63

ACH22 PC1 63 13 62

ACH30 GND 64 14 28

ACH23 PC0 65 15 27

ACH31 GND 66 16 61

ACH32 PB7 67 17 26

ACH40 GND 68 18 60

ACH33 PB6 69 19 59

ACH41 GND 70 20 25

ACH34 PB5 71 21 24

ACH42 GND 72 22 58

ACH35 PB4 73 23 23

ACH43 GND 74 24 57

AISENSE2 PB3 75 25 56

AIGND GND 76 26 22

ACH36 PB2 77 27 55

ACH44 GND 78 28 21

ACH37 PB1 79 29 20

ACH45 GND 80 30 54

ACH38 PB0 81 31 19

ACH46 GND 82 32 53

ACH39 PA7 83 33 52

Table 2. Extended I/O Cable Connections (Continued)

Signal Names Connector Pin Numbers

NI 6031E, NI 6033E,

NI 6061E, NI 6071E NI 6021E, NI 6025E 100-Pin 50-Pin 68-Pin

©National Instruments Corporation 9 SCXI-1353 Shielded Cable Assembly

Using the SCXI-1353 with an NI 6031E, NI 6033E, NI 6061E, or NI 6071E

The MIO-16 cable connects the MIO-16 portion of the AT-MIO-64E-3

pinout to the SCXI-1349. The EXTENDED I/O cable connects the

remainder of the AT-MIO-64E-3 pinout to the AI-48/DIO-24.

You can connect the MIO-16 cable, using the SCXI-1349, to the following

SCXI modules: SCXI-1100, SCXI-1120, SCXI-1121, SCXI-1122,

SCXI-1124, SCXI-1140, SCXI-1141, SCXI-1160, SCXI-1161,

SCXI-1162, SCXI-1162HV, SCXI-1163, SCXI-1163R, SCXI-1180,

or SCXI-1181.

ACH47 GND 84 34 18

ACH48 PA6 85 35 17

ACH56 GND 86 36 51

ACH49 PA5 87 37 16

ACH57 GND 88 38 50

ACH50 PA4 89 39 49

ACH58 GND 90 40 15

ACH51 PA3 91 41 14

ACH59 GND 92 42 48

ACH52 PA2 93 43 13

ACH60 GND 94 44 47

ACH53 PA1 95 45 46

ACH61 GND 96 46 12

ACH54 PA0 97 47 11

ACH62 GND 98 48 45

ACH55 +5V 99 49 10

ACH63 GND 100 50 44

Pins 1 through 9 and pins 35 through 43 on the 68-pin connector are not connected.

Table 2. Extended I/O Cable Connections (Continued)

Signal Names Connector Pin Numbers

NI 6031E, NI 6033E,

NI 6061E, NI 6071E NI 6021E, NI 6025E 100-Pin 50-Pin 68-Pin

SCXI-1353 Shielded Cable Assembly 10 ni.com

You can connect the EXTENDED I/O cable, using the AI-48/DIO-24,

to the SCXI-1180 feedthrough panel or SCXI-1181 module.

Using the SCXI-1353 with an NI 6021E or NI 6025E

The MIO-16 cable connects the MIO-16 portion of the AT-MIO-16DE-10

pinout to the SCXI-1349. The EXTENDED I/O cable connects the

remainder of the AT-MIO-16DE-10 pinout to the AI-48/DIO-24.

You can connect the MIO-16 cable, using the SCXI-1349, to the following

SCXI modules: SCXI-1100, SCXI-1120, SCXI-1121, SCXI-1122,

SCXI-1124, SCXI-1140, SCXI-1141, SCXI-1160, SCXI-1161,

SCXI-1162, SCXI-1162HV, SCXI-1163, SCXI-1163R, SCXI-1180,

or SCXI-1181.

You can connect the EXTENDED I/O cable, using the AI-48/DIO-24,

to the following SCXI modules: SCXI-1162, SCXI-1162HV, SCXI-1163,

SCXI-1163R, SCXI-1180 feedthrough panel, or SCXI-1181.

Note If the module that you are using is not listed here, please refer to the NI Web site

at ni.com/support for technical support.

Specifications

Maximum Working Voltage

Maximum working voltage refers to the signal voltage plus the

common-mode voltage.

Channel-to-earth .....................................±15 V, installation category I

Channel-to-channel.................................±15 V, installation category I

Environmental

Operating temperature ............................0 to 50 °C

Storage temperature................................–20 to 70 °C

Humidity.................................................10 to 90% RH, noncondensing

Maximum altitude...................................2000 meters

Pollution degree (indoor use only) .........2

Inhaltsverzeichnis

Andere National Instruments Kabel und Steckverbinder Handbücher

National Instruments

National Instruments TB-2676 Bedienungsanleitung

National Instruments

National Instruments CB-27 Bedienungsanleitung

National Instruments

National Instruments SCB-12 Bedienungsanleitung

National Instruments

National Instruments SCXI-1348 Bedienungsanleitung

National Instruments

National Instruments SH160DIN-3XDB50F Bedienungsanleitung

National Instruments

National Instruments SH6850 Bedienungsanleitung

National Instruments

National Instruments BNC-2120 Bedienungsanleitung

National Instruments

National Instruments SCB-19 Bedienungsanleitung

National Instruments

National Instruments PXI-1031DC Bedienungsanleitung

National Instruments

National Instruments SCXI-1355 Bedienungsanleitung

National Instruments

National Instruments IMAQ D6826 Bedienungsanleitung

National Instruments

National Instruments SCB-68 Bedienungsanleitung

National Instruments

National Instruments SCXI-1342 PC-LPM-16 Bedienungsanleitung

National Instruments

National Instruments BNC-2090A Bedienungsanleitung

National Instruments

National Instruments IMAQ A2514 Bedienungsanleitung

National Instruments

National Instruments 9923 Bedienungsanleitung

National Instruments

National Instruments NI SCB-68A Bedienungsanleitung

National Instruments

National Instruments PXI-2530B Bedienungsanleitung

National Instruments

National Instruments PXI-1042HVDC Bedienungsanleitung

National Instruments

National Instruments SCXI-1345 Bedienungsanleitung

National Instruments

National Instruments CB-27 Bedienungsanleitung

National Instruments

National Instruments NI-XNET CAN HS/FD Bedienungsanleitung

National Instruments

National Instruments IMAQ A8055 Bedienungsanleitung

National Instruments

National Instruments CB-50 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung