National Instruments NI-6589 Bedienungsanleitung

NI-6589

2022-07-06

Contents

NI 6589 Getting Started Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

FlexRIO Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Verifying the System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the NI 6589. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Confirming that Measurement & Automation Explorer (MAX) Recognizes the Device. .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel and Connector Pinouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Block Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Component-Level Intellectual Property (CLIP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

NI 6589 CLIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Clocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Where to Go Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Worldwide Support and Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ni.com

NI-6589

NI 6589 Getting Started Guide

Note Before you begin, complete the soware and hardware installation

instructions in the getting started guide for your FlexRIO FPGA module or

Controller for FlexRIO.

The NI 6589 is a FlexRIO adapter module designed to work in conjunction with

FlexRIO FPGA modules and Controllers for FlexRIO.

The NI 6589 features 20 LVDS channels (16 data and 4 PFI), and sample rates up to

1 Gbit/s on LVDS channels

This document explains how to install and configure the NI 6589.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits

for electromagnetic compatibility (EMC) stated in the product specifications. These

requirements and limits are designed to provide reasonable protection against

harmful interference when the product is operated in the intended operational

electromagnetic environment.

This product is intended for use in industrial locations. However, harmful

interference may occur in some installations, when the product is connected to a

peripheral device or test object, or if the product is used in residential or

commercial areas. To minimize interference with radio and television reception and

prevent unacceptable performance degradation, install and use this product in strict

accordance with the instructions in the product documentation.

Furthermore, any modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory

rules.

Caution To ensure the specified EMC performance, operate this product

only with shielded cables and accessories.

NI-6589

Caution To ensure the specified EMC performance, you must attach EMI

gaskets (NI part number 746228-01) to both sides of your NI 6589 before

using.

Caution To ensure the specified EMC performance, you must install PXI

EMC Filler Panels (NI part number 778700-01) in all open chassis slots.

FlexRIO Documentation

Document Location Description

Getting started guide

for your FlexRIO FPGA

module or Controller

for FlexRIO

Available from the Start menu and

at ni.com/manuals.

Contains installation instructions for

your FlexRIO system.

Specifications

document for your

FlexRIO FPGA module

or Controller for

FlexRIO

Available from the Start menu and

at ni.com/manuals.

Contains specifications for your

FlexRIO FPGA module or Controller

for FlexRIO.

Getting started guide

for your adapter

module

Available from the Start menu and

at ni.com/manuals.

Contains signal information,

examples, and CLIP details for your

adapter module.

Specifications

document for your

adapter module

Available from the Start menu and

at ni.com/manuals.

Contains specifications for your

adapter module.

LabVIEW FPGA

Module Help

Embedded in LabVIEW Help and

at ni.com/manuals.

Contains information about the basic

functionality of the LabVIEW FPGA

Module.

Real-Time Module

Help

Embedded in LabVIEW Help and

at ni.com/manuals.

Contains information about real-time

programming concepts, step-by-step

instructions for using LabVIEW with

the Real-Time Module, reference

information about Real-Time Module

VIs and functions, and information

about LabVIEW features on real-time

operating systems.

ni.com

NI-6589

Document Location Description

FlexRIO Help Available from the Start menu and

at ni.com/manuals.

Contains information about the FPGA

module front panel connectors and

I/O, controller for FlexRIO front panel

connectors and I/O, programming

instructions, and adapter module

component-level IP (CLIP).

FlexRIO Adapter

Module Development

Kit User Manual

Available from the Start menu at

Start » All Programs » National

Instruments » NI FlexRIO » NI

FlexRIO Adapter Module

Development Kit »

Documentation.

Contains information about how to

create custom adapter modules for

use with FlexRIO FPGA modules.

LabVIEW Examples Available in NI Example Finder. In

LabVIEW, click Help » Find

Examples » Hardware Input and

Output » FlexRIO.

Contains examples of how to run

FPGA VIs and Host VIs on your device.

IPNet Located at ni.com/ipnet. Contains LabVIEW FPGA functions

and intellectual property to share.

FlexRIO product page Located at ni.com/flexrio. Contains product information and

data sheets for FlexRIO devices.

Table 1. FlexRIO Documentation Locations and Descriptions

Verifying the System Requirements

To use the FlexRIO Support instrument driver, your system must meet certain

requirements. For more information about minimum system requirements,

recommended system, and supported application development environments

(ADEs), refer to the FlexRIO Support Readme, which is available on the FlexRIO

Support soware DVD or online at ni.com/updates.

NI-6589

Unpacking

Caution To prevent ESD from damaging the devices, ground yourself

using a grounding strap or by holding a grounded object, such as your

computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove each module from the package and inspect it for loose components

or any other sign of damage.

Caution Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the devices in the antistatic package when they are not in use.

Preparing the Environment

Ensure that the environment you are using the NI 6589 in meets the following

specifications.

Operating temperature (IEC 60068-2-1, IEC 60068-2-2) 0 °C to 55 °C

Operating humidity (IEC 60068-2-56) 10% to 90% RH, noncondensing

Pollution Degree 2

Maximum altitude 2,000 m at 25 °C ambient temperature

Indoor use only.

Note Refer to the NI 6589 Specifications at ni.com/manuals for complete

specifications.

ni.com

NI-6589

Caution Clean the hardware with a so, nonmetallic brush. Make sure

that the hardware is completely dry and free from contaminants before

returning it to service.

Installing the NI 6589

Refer to the getting started guide for your FlexRIO FPGA module or Controller for

FlexRIO for instructions about how to install your FlexRIO system, including the

NI 6589.

Confirming that Measurement & Automation Explorer (MAX)

Recognizes the Device

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX

informs other programs about which devices reside in the system and how they are

configured. MAX is automatically installed with FlexRIO Support.

1. Launch MAX by navigating to Start » All Programs » National Instruments » NI

MAX or by clicking the NI MAX desktop icon.

2. In the Configuration pane, double-click Devices and Interfaces to see the list

of installed devices. Installed devices appear under the name of their

associated chassis.

3. (PXI and PXI Express devices only) Expand your Chassis tree item. MAX lists all

devices installed in the chassis. Your default device names may vary.

Note If you do not see your hardware listed, press <F5> to refresh

the list of installed devices. If the device is still not listed, power o

the system, ensure the device is correctly installed, and restart.

4. (Controllers for FlexRIO only) Your device appears under the Remote Devices

section.

NI-6589

Cables

Caution You must operate the NI 6589 with shielded cables and shielded

accessories to ensure compliance with the EMC requirements defined in

the NI 6589 Specifications. Do not use unshielded cables or accessories

unless they are installed in a shielded enclosure with properly designed

and shielded input/output ports and are connected to the NI 6589 using a

shielded cable. If unshielded cables or accessories are not properly

installed and shielded, the EMC specifications for the NI 6589 are no longer

guaranteed.

Use a shielded 50 Ω coaxial cable with an SMA plug end to connect to the PFI 0 and

CLOCK IN connectors on the NI 6589 front panel. Use the NI SHB12X-B12X shielded

cable (NI part number 192344-01) or the NI SHB12X-H3X24 dierential flying-lead

cable (NI part number 196236-1R5) to connect to the DDC connector. You can also

connect the NI SMA-2164 accessory to the NI 6589 through the SHB12X-B12X

shielded cable for testing and debugging.

Note If you design a custom cabling solution with the DDC connector

(779157-01) and SHB12X-B12X shielded cable (192344-01), the NI 6589

pinout is reversed at the end connector. For example, the signal shown on

pin 1 maps to pin 73 at the end connector.

The following NI cables and accessories are not properly shielded for EMC-

compliant use with the NI 6589:

■NI SMA-2164 accessory

■NI SHB12X-H3X24 dierential flying-lead cable

Note Whether you use NI cables and accessories or design your own,

terminate cables properly to avoid improper measurements caused by

signal reflections, overshoot, and undershoot.

ni.com

NI-6589

Accessories

The NI SMA-2164 test fixture is a breakout box for dierential signals. This fixture

provides an easy way to connect to other devices for testing and debugging.

The following figure shows how to connect the dierential DDC connector to the

NI SMA-2164, using the NI SHB12X-B12X cable. For more information about using

the NI SMA-2164, refer to the NI SMA-2164/2165 Test Fixture User Guide.

Figure 1. Connecting the NI SMA-2164 Accessory

NI PXI-1042

STROBE

CLK_LVPECL

IO_3

–

IO_7

IO_10

IO_6

IO_11

IO_13

MADE IN U.S.A.

IO_15

ASSY192533 A- 01

–

I O_ 12

–

IO_4

IO_5

IO_8

IO_2

IO_9

–

IO_1

–

PFI_3

CLK_LVDS

PFI_2

–

PFI_1

VOS

IO_0

VOS

–

S/N

–

VOS

–

VOS

NI SMA-2164

DIFFERENTIAL

DIGITAL I/O ACCESSORY

FOR PATENTS: NI.COM/PATENTS

NI 6587

PFI 0

CLOCK IN

1 Gbps

LVDS

1. PXI/PXIe Chassis with an NI 6589R

2. NI SHB12-B12X Cable

3. NI SMA-2164

A flying lead cable, the NI SHB12X-H3X24, is also available for dierential signals.

This cable oers connectivity similar to that found on a typical logic analyzer, so you

can use it in logic analyzer-type applications. This cable is shown in the following

figure.

NI-6589

Figure 2. NI SHB12X-H3X24 Flying Lead Cable

1. Leads (1 × 3 Header Receptacle)

2. DDC Connector

3. Removeable Sleeving

Custom Accessories

If you are creating a custom accessory to use with a DUT with a VHDCI DDC

connector, you can purchase the mating connector for the VHDCI cable from NI. For

more information about creating these custom accessories, refer to the Interfacing

to the NI Digital Waveform Generator/Analyzer using the VHDCI Connector

application note.

Visit ni.com/info and enter the Info Code rdinwa to download this note.

If you are designing a custom accessory to use with a device that uses an InfiniBand

connector, you can also purchase this connector from NI.

Note If you design a custom cabling solution with the DDC connector

(779157-01) and SHB12X-B12X shielded cable (192344-01), the NI 6589

pinout is reversed at the end connector. For example, the signal shown on

pin 1 maps to pin 73 at the end connector.

For more information about connecting I/O signals on your device, refer to the

NI 6589 Specifications.

ni.com

NI-6589

Andere Handbücher für NI-6589

Inhaltsverzeichnis

Andere National Instruments E/A-System Handbücher

National Instruments

National Instruments NI 6738 Handbuch

National Instruments

National Instruments NI 6583R Bedienungsanleitung

National Instruments

National Instruments 6711 Bedienungsanleitung

National Instruments

National Instruments SCC-CI20 Bedienungsanleitung

National Instruments

National Instruments 6527 Bedienungs- und Wartungshandbuch

National Instruments

National Instruments NI USB-6000 Bedienungsanleitung

National Instruments

National Instruments DAQPad-6508 Bedienungsanleitung

National Instruments

National Instruments PXIe-7822 Bedienungsanleitung

National Instruments

National Instruments NI VISION PCI-8254R Bedienungsanleitung

National Instruments

National Instruments FieldPoint cFP-1808 Bedienungsanleitung

National Instruments

National Instruments NI-9244 Bedienungsanleitung

National Instruments

National Instruments SC Express Series Bedienungsanleitung

National Instruments

National Instruments PXIe-4339 Bedienungsanleitung

National Instruments

National Instruments NI 9236 Bedienungsanleitung

National Instruments

National Instruments NI 9211E Bedienungsanleitung

National Instruments

National Instruments PXIe-7856R Bedienungsanleitung

National Instruments

National Instruments PCIe-784 R Series Bedienungsanleitung

National Instruments

National Instruments NI PCIe-7821R Bedienungsanleitung

National Instruments

National Instruments NI 9752 Bedienungsanleitung

National Instruments

National Instruments FieldPoint FP-DO-410 Bedienungsanleitung

National Instruments

National Instruments NI 9375 Bedienungsanleitung

National Instruments

National Instruments AT-MIO-16 Bedienungsanleitung

National Instruments

National Instruments NI-9361 Bedienungsanleitung

National Instruments

National Instruments NI USB-7845R Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung