National Instruments NI USB-7845R Bedienungsanleitung

GETTING STARTED GUIDE

NI USB-7845R

R Series for USB Multifunction RIO with Kintex-7 70T FPGA

Français Deutsch 日本語 한국어 简体中文

ni.com/manuals

This document explains how to install and configure National Instruments NI USB-7845R.

Safety Guidelines

Caution Do not operate the NI USB-7845R in a manner not specified in this user

manual. Product misuse can result in a hazard. You can compromise the safety

protection built into the product if the product is damaged in any way. If the product

is damaged, return it to National Instruments for repair.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) as stated in the product specifications. These

requirements and limits are designed to provide reasonable protection against harmful

interference when the product is operated in its intended operational electromagnetic

environment.

This product is intended for use in residential, commercial, and industrial locations. However,

harmful interference may occur in some installations or when the product is connected to a

peripheral device or a test object. To minimize interference with radio and television reception

and prevent unacceptable performance degradation, install and use this product in strict

accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, you must install the included

snap-on ferrite bead onto the DC power cord of the power supply as described in this

document.

Caution To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

Unpacking the Kit

Caution To prevent electrostatic discharge from damaging the device, ground

yourself using a grounding strap or by holding a grounded object, such as your

computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Caution Never touch the exposed pins of connectors.

Notify NI if the device appears damaged in any way. Do not install a damaged device.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following components are in your kit.

Figure 1. Kit Contents for the NI USB-7845R

1. Module

2. USB Cable

3. Ferrite Bead

4. NI-RIO Media

5. Power Supply

6. Getting Started Guide

2| ni.com | NI USB-7845R Getting Started Guide

Installing Software

You must be an Administrator to install NI software and devices on your computer. Before

connecting the hardware, install the software in the following order.

1. Install the driver software using either the media included in your kit or by downloading

the latest version from ni.com/downloads.

2. Follow the instructions in the installation prompts.

a) Windows 8/7/Vista users may see access and security messages during installation.

Accept the prompts to complete the installation.

3. When the installer completes, a dialog box asks if you want to restart, shut down, or

restart later. Select Restart .

Installing the Hardware

Connecting the USB Cable

USB modules can be connected directly to the host PC, to a powered USB hub, or to an NI

PXI or PXI Express chassis featuring a USB port.

1. Connect the USB cable to the NI USB-7845R using the cable device port.

2. Connect the other end of the USB cable to the host PC, powered hub, or chassis.

3. Use the jackscrew on the locking USB cable to securely attach the cable to the NI

USB-7845R.

Powering the Module

Caution To ensure the specified EMC performance, install the included snap-on

ferrite bead onto the DC power cord of the power supply in accordance with the

instructions provided.

1. Install the ferrite bead by opening the housing and looping the power supply once through

the center of the bead. Ensure the ferrite bead is as close to the end of the cable as

practical.

2. Close the ferrite bead until the locking tabs engage securely.

NI USB-7845R Getting Started Guide | © National Instruments | 3

Figure 2. Installing the Ferrite Bead

9-30 V

C V

20 W MAX

1. Power Supply

2. Ferrite

3. Connect the power supply to the NI USB-7845R.

4. Connect the other end of the power supply to a user-supplied power cord.

5. Connect the user-supplied power cord to the appropriate power source.

6. Turn the power switch on the NI USB-7845R to the on position.

USB Device Security Cable Slot

The security cable slot allows you to attach an optional laptop lock to your NI USB-7845R.

Note The security cable is designed to act as a deterrent, but might not prevent the

device from being mishandled or stolen. For more information, refer to the

documentation that accompanied the security cable.

Note The security cable slot on the USB device might not be compatible with all

laptop lock cables.

Refer to the documentation that accompanied the security cable for installation

instructions.

Verifying Hardware Installation

You can verify that the system recognizes the USB device by using Measurement &

Automation Explorer (MAX).

1. Launch MAX by navigating to Start»All Programs»National Instruments»MAX or by

clicking the MAX desktop icon.

2. Expand Devices and Interfaces.

3. Verify that the device appears under USB Devices.

If the device does not appear, press <F5> to refresh the view in MAX. If the device does

not appear after refreshing the view, visit ni.com/support for troubleshooting

information.

4| ni.com | NI USB-7845R Getting Started Guide

Connecting Signals

The following figure shows the I/O connector pin assignments and locations for the NI

USB-7845R.

Caution To ensure the specified EMC performance, operate this product only

with shielded cables and accessories.

Note NI is not liable for connections that exceed any of the maximum ratings

of input or output signals on the NI USB-7845R and on the computer chassis.

For the maximum input and output ratings for each signal, refer to the NI

USB-7845R Specifications, available at ni.com/manuals.

Figure 3. NI USB-7845R Connector Pin Assignments and Locations

DIO30

GND

DIO28

GND

DIO26

GND

DIO24

GND

DIO22

GND

DIO20

GND

DIO18

GND

DIO16

GND

DIO14

GND

DIO12

GND

DIO10

GND

DIO8

GND

DIO6

GND

DIO4

GND

DIO2

GND

DIO0

GND

DIO31

DIO29

GND

DIO25

GND

DIO23

GND

DIO27

GND

DIO21

GND

DIO19

GND

DIO17

GND

DIO15

GND

DIO13

GND

DIO11

GND

DIO9

GND

DIO7

GND

DIO5

GND

DIO3

GND

DIO1

GND

68 34

67 33

66 32

65 31

64 30

63 29

62 28

61 27

60 26

59 25

58 24

57 23

56 22

55 21

54 20

53 19

52 18

51 17

50 16

49 15

48 14

47 13

46 12

45 11

44 10

43 9

42 8

41 7

40 6

39 5

38 4

37 3

36 2

35 1 +5V

DIO0

DIO1

DIO2

DIO3

DIO4

DIO5

DIO6

DIO7

DIO9

DIO11

DIO13

DIO15

AO7

AO6

AO5

AO4

AO3

AO2

AO1

AO0

AISENSE

AI7+

AIGND6

AI6+

AI5+

AIGND4

AI4+

AI3+

AIGND2

AI2+

AI1+

AIGND0

AI0+

+5V

DGND

DIO8

DIO10

DIO12

DIO14

AOGND7

AOGND6

AOGND5

AOGND4

AOGND3

AOGND2

AOGND1

AOGND0

AI7–

AIGND7

AI6–

AI5–

AIGND5

AI4–

AI3–

AIGND3

AI2–

AI1–

AIGND1

AI0–

68 34

67 33

66 32

65 31

64 30

63 29

62 28

61 27

60 26

59 25

58 24

57 23

56 22

55 21

54 20

53 19

52 18

51 17

50 16

49 15

48 14

47 13

46 12

45 11

44 10

43 9

42 8

41 7

40 6

39 5

38 4

37 3

36 2

35 1

CONNECTOR 0

(DIO)

CONNECTOR 1

(MIO)

TERMINAL 34

TERMINAL 68

TERMINAL 1

TERMINAL 35

TERMINAL 34

TERMINAL 68

TERMINAL 1

TERMINAL 35

The +5 V terminals on the I/O connector supply +5 V referenced to GND. Use these terminals

to power external circuitry. The NI USB-7845R is protected from overvoltage and overcurrent

NI USB-7845R Getting Started Guide | © National Instruments | 5

conditions. Refer to the NI USB-7845R User Manual, available at ni.com/manuals, for

more information.

Where to Go Next

Refer to the following figure for information about other product tasks and associated

resources for those tasks.

Worldwide Support and Services

The National Instruments website is your complete resource for technical support. At ni.com/

support, you have access to everything from troubleshooting and application development

self-help resources to email and phone assistance from NI Application Engineers.

6| ni.com | NI USB-7845R Getting Started Guide

Visit ni.com/services for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit ni.com/register to register your National Instruments product. Product registration

facilitates technical support and ensures that you receive important information updates from

NI.

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,

Austin, Texas, 78759-3504. National Instruments also has offices located around the world.

For telephone support in the United States, create your service request at ni.com/support or

dial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the

Worldwide Offices section of ni.com/niglobal to access the branch office websites, which

provide up-to-date contact information, support phone numbers, email addresses, and current

events.

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents

covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the

patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find information about

end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export

Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and

how to obtain relevant HTS codes, ECCNs, and other import/export data.

376845A-01 Mar14

Andere Handbücher für NI USB-7845R

Inhaltsverzeichnis

Andere National Instruments E/A-System Handbücher

National Instruments

National Instruments PXI-6289 Bedienungsanleitung

National Instruments

National Instruments PXI-6071E Bedienungsanleitung

National Instruments

National Instruments NI REM-11100 Bedienungsanleitung

National Instruments

National Instruments AT-MIO-16 Bedienungsanleitung

National Instruments

National Instruments PXIe-4339 Bedienungsanleitung

National Instruments

National Instruments FIELDPOINT cFP-AI-118 Bedienungsanleitung

National Instruments

National Instruments 9229 Bedienungsanleitung

National Instruments

National Instruments C Series Handbuch

National Instruments

National Instruments NI 7831R Bedienungsanleitung

National Instruments

National Instruments Isolated Analog Output Module SCC-AO10 Bedienungsanleitung

National Instruments

National Instruments 9220 Bedienungsanleitung

National Instruments

National Instruments E Series Bedienungs- und Wartungshandbuch

National Instruments

National Instruments SCXI SCXI-1102 Handbuch

National Instruments

National Instruments 9220 Handbuch

National Instruments

National Instruments NI 9225 Bedienungsanleitung

National Instruments

National Instruments PXIe-4357 Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments FieldPoint cFP-1808 Bedienungsanleitung

National Instruments

National Instruments roboRIO Bedienungsanleitung

National Instruments

National Instruments PXIe-7865 Handbuch

National Instruments

National Instruments PXIe-7820 Bedienungsanleitung

National Instruments

National Instruments NI USB-6008 Bedienungsanleitung

National Instruments

National Instruments 622 Series Bedienungsanleitung

National Instruments

National Instruments PXI-7830R Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung