NEC NP3150CM Leitfaden

5880 Sheridan Boulevard, Arvada, Colorado 80003

Ph: 303-412-0399 ▪Fax: 303-412-9346

www.displaydevices.com



NECDisplaySolutionsofAmerica,Inc.



InstallationandAssemblyManual:

CustomCeilingMountforNECNP1000,NP2000,NP1150,NP2150,

NP3150,NP3151W,NP1250,NP2250,NP3250,andNP3250WProjectors



Model:NP3150CM

Ceiling Mount

1. Remove ¼”-20 button head bolt on ceiling plate to remove lower portion of mount.

2. Install the ceiling plate with (4) 5/16” bolts to structural attachment points. Lag screws

may be used when attaching to wood joists.

3. Reattach the lower portion of the mount.

4. Attach interface plate (pn 72-061) to projector with (4) M4 x 10 pan head Phillips screws.

5. Align interface plate into holes on mount, slide stand off bolts into slots and tighten. Add

center locking Torx cap screw which attach secures the interface plate to the mount.

6. Attach the wire safety rope to the interface plate with the enclosed coupler.

7. Attach power and signal cables to projector.

8. Attach the I/O cover (pn 72-065) to the interface plate with (4) 10-32 x 3/8 pan head

Phillips screws and #10 lock washers.

9. Loosen tilt adjustment cap screw with enclosed tool and level the projected image to the

screen. Tighten cap screw when a level image is achieved.

10. Loosen up-down pitch adjustment cap screw with enclosed tool and adjust the pitch

angle of the projector. Tighten cap screw when at desired projection position.

11. If desired, add Kensington lock through the opening of the mount head, loop through

cable end and attach to projector.

5880 Sheridan Boulevard, Arvada, Colorado 80003

Ph: 303-412-0399 ▪Fax: 303-412-9346

www.displaydevices.com

Pole Mount

1. Install a 1 ½” NPT pipe with male threads on lower end from the ceiling. Aftermarket

mounting pans and accessories are available.

2. Thread locking ring onto pipe. Thread mount onto pipe and leave locking ring loose.

3. Attach interface plate (pn 72-061) to projector with (4) M4 x 10 pan head Phillips screws.

4. Align interface plate into holes on mount, slide stand off bolts into slot and tighten. Add

center locking Torx cap screw which attach secures the interface plate to the mount.

5. Attach the wire safety rope to the interface plate with the enclosed coupler.

6. Insert power and signal cables through pipe and out the top of the mount head to the

projector and attach to projector.

7. Attach the I/O cover (pn 72-065) to the interface plate with (4) 10-32 x 3/8 pan head

Phillips screws and #10 lock washers.

8. Adjust left-to-right yaw. When desired position is attained, tighten locking ring on pipe

to mount.

9. Loosen tilt adjustment cap screw with enclosed tool and level the projected image to the

screen. Tighten cap screw when a level image is achieved.

10. Loosen up-down pitch adjustment cap screw with enclosed tool and adjust the pitch

angle of the projector. Tighten cap screw when at desired projection position.

11. If desired, add Kensington lock through the opening of the mount head, loop through

cable end and attach to projector.

Dieses Handbuch passt für folgende Modelle

10

Inhaltsverzeichnis

Andere NEC Rack & Stand Handbücher

NEC

NEC NP600CM Leitfaden

NEC

NEC PlasmaSync PX-60XM5A Bedienungsanleitung

NEC

NEC NP05WK1 Leitfaden

NEC

NEC WM-55UN-L Bedienungsanleitung

NEC

NEC NP-P350W Leitfaden

NEC

NEC ST-EX2023 Bedienungsanleitung

NEC

NEC MultiSync V801 Bedienungsanleitung

NEC

NEC NP40CM Leitfaden

NEC

NEC T1000 - STAND MOUNTING Bedienungsanleitung

NEC

NEC 92679B/W Bedienungsanleitung

NEC

NEC N8140-820 Bedienungsanleitung

NEC

NEC WMK-3298T Bedienungsanleitung

NEC

NEC N8154-46 Bedienungsanleitung

NEC

NEC easyHook NEC55 Bedienungsanleitung

NEC

NEC Wall Mount WMS32-55 Bedienungsanleitung

NEC

NEC NP04WK1 Leitfaden

NEC

NEC LCD3215 - MultiSync - 32" LCD Flat Panel... Bedienungsanleitung

NEC

NEC WM-46S-P Bedienungsanleitung

NEC

NEC IP55 Cabinet Bedienungsanleitung

NEC

NEC N8143-56F/56E Bedienungsanleitung

NEC

NEC PDWHM-M Bedienungsanleitung

NEC

NEC MultiSync P701 Bedienungsanleitung

NEC

NEC LT30 - XGA DLP Projector Leitfaden

NEC

NEC WM-46UN-2X2 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung