NEC Univerge SV8100 Bedienungs- und Montageanleitung

Document No. SIB 244 Page 1of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

NEC BSG Technical Assistance Centre

Service Information Bulletin

UNIVERGE SV8100

SMB Communications Server

Table of Contents



TableofContents.....................................................................................................................................................1

Introduction..............................................................................................................................................................2

WhatisincludedinRelease1?.................................................................................................................................3

SystemCapacity........................................................................................................................................................4

FeatureComparison.................................................................................................................................................5

SoftwareVersions..................................................................................................................................................10

Documentation......................................................................................................................................................11

CustomerCD..........................................................................................................................................................12

ApplicationCD.......................................................................................................................................................12

Licensing................................................................................................................................................................13

SystemLicenses.....................................................................................................................................................16

SystemHardware..................................................................................................................................................19

TerminalHardware................................................................................................................................................23

InstallationofIPTerminals....................................................................................................................................28

AutoConfiguration............................................................................................................................................28

IPDECT...................................................................................................................................................................33

VoiceMail..............................................................................................................................................................38

VM8000InMail..................................................................................................................................................38

UM8000UnifiedMessaging..............................................................................................................................39

Specifications....................................................................................................................................................42

VoicemailComparisonChart............................................................................................................................43

ACD‐MISApplication.............................................................................................................................................47

PCProgramming–PCPro......................................................................................................................................48

PCProgramming–WebPro...................................................................................................................................51

NEC’sUNIVERGE®360.............................................................................................................................................52



Document No. SIB 244 Page 2of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

Introduction



NECAustraliaPtyLtdhasreleasedthenextgenerationSMBcommunicationssolutionintheUNIVERGE

SV8100.



Whetheryourbusinessissmallormedium‐sized,NEC’sUNIVERGESV8100CommunicationsServerprovides

theflexibilitytomeetallofyourcommunicationneeds.Thispowerful,feature‐richsolutioniscompletely

scalableandcanbeexpandedforfuturegrowth.TheUNIVERGESV8100isdesignedtorespondtothe

changingneedsofbusinesstoday.Extraordinaryflexibility,greatergrowthcapabilitiesandenhancedsystem

features,makebusinesseasierandmoreeffective.



TheUNIVEREGESV8100givesyouachoice:Youcandeploytraditionaltelephony,ToIP(TelephonyoverIP),ora

combination,allfromonesystem.TheSV8100providesyourcustomerthefreedomtoadoptToIPwhenand

whereyouneedit,sotoday’stechnologycanbeusedtomorrow.



ThisbulletinprovidesanoverviewofRelease1oftheUNIVERGESV8100,includingthenewrangeofDT300

andDT700businessclassterminals.



Document No. SIB 244 Page 3of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

What is included in Release 1?



Platform:

o6Slot2RUChassis,upto4perstack

oChoiceof19”Rack,Wall,Floor,orStandmountingoptions

oInternalandExternalbatterybackupfacilities



Terminals:

oDT300DigitalMultilineTerminals

oDT700SIPMultilineTerminals

oStandardSIPTerminals

oIPDECTTerminals

oSP310SoftPhone

oStandardAnalogueextensions(LC)

oLongLineAnalogueextensions(OPX)



Trunks:

oPSTNwithCallerIDsupport(COT)

oBasicRateISDN(BRI)

oPrimaryRateISDN(PRI)

oE&MTieLines(ODT)

oSIPTrunks

oK‐CCISPeertoPeer



Applications:

oAutomatedAttendant/VRS

oVM8000InMail

oUM8000Mail(UnifiedMessaging)

oHotel/Motel

oMobileExtension

oACD/MIS

oTAPICompatibility

oPCPro‐PCProgramming

oWebPro‐BrowserProgramming



Document No. SIB 244 Page 4of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

System Capacity



TheUNIVERGESV8100canbeconfiguredforoneofthreecapacities,64‐port,256‐port,ortheunlimited712‐

portsystem.



ThetablebelowhighlightsthesystemcapacityoftheSV8100dependinghowmanychassisareinstalled:



1Chassis2Chassis3Chassis4ChassisSYSTEM

MAX.

UniversalSlots6*12*18*24*

TimeSlots 111222333444

TDMPorts96192288384512

MLT/DLC80160240320

512

SLT/LC(‐24V)80176272368

OPX/DIOP(‐48V)24487296

IPMLTExtensions512

SIPExtensions512

AnalogueTrunks40 88 136 184

200

BRIISDNTrunks4088136184

PRIISDNTrunks90200200200

IPTrunks(SIP) 128

VoIPChannels 128

VM/VRSChannels 16

V34Modem 1



Comparisonwithprevioussystems:



IPK

Basic

IPK

Expanded

IPKII

Basic

IPKII

Expanded

SV8100

Basic

SV8100

Expanded

SV8100

Unlimited

Max.PortCapacity48184 64 456 64 256712

Universalslots2424242424*24*24*

OutsideLines1664

64max

200

64max256max

200

IPHandsets

32max120max256max512max

DigitalHandsets

AnalogueHandsets

WirelessHandsets

CAR/VE256max256max256max256max256max

DSSModules4max4max32max32max32max32max32max

PowerFailcircuits3333444444

In‐MailPortsN/AN/A 4 4 16 1616



Notes:

•TheCD‐CP00‐AU(CPU)consumesoneUniversalSlotinthefirstchassis

•WithoutaPZ‐ME50installedsupportsonechassisonlywithamaximumof64ports.

•ExpandedorUnlimitedrequiresthePZ‐ME50andappropriatelicensing.

•PFTrequiresuseofthe4COTbladeandprovides2connectionsperblade.

Document No. SIB 244 Page 5of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

Feature Comparison



Thefollowingtableprovidesacross‐referencebetweentheIPKIIandSV8100features.Furtherinformationcan

befoundwithintheSV8100Features&SpecificationsManual.



S=Supported

X=NotSupported

E=Enhanced



IPKIIFeatureNameIPKII

V1000

IPKII

V2000

IPKII

V2500

SV8100

R1SV8100Comments

AccountCode–

Forced/Verified/UnverifiedSSSS 

AccountCodeEntrySSSS 

AlarmSSSS 

AlarmReportsXESS

AlphanumericDisplaySSSSBacklitDisplayandKeypad

AnalogueCommunications

Interface(ACI)SSSS 

AncillaryDeviceConnectionSSSS 

AnswerHoldSSSS 

AnswerKeySSSS 

AttendantCallQueuingSSSS 

AutomaticCallDistribution(ACD)SESS

Abletodownloadconfigdata

fromCPUandtocreatereports

inCSVformat

AutomaticReleaseSSSS 

AutomaticRouteSelectionSSSSSupportsroutingofdigit"∗"

throughARS

BackgroundMusicSSSS 

BargeInSSSS 

BatteryBackup–SystemMemorySSSS 

BatteryBackup–SystemPowerSSSS 

CallAppearance(CAP)KeysSSSS 

CallArrival(CAR)KeysSSSS 

CallDurationTimerSSSS

CallForwardingSESS 

CallForwarding‐CentrexXEES 

CallForwarding‐DNDOverrideSSSS 

CallForwarding‐ParkandPageSSSSSupportedbyInMailand

UM8000

CallForwarding‐FollowMeSSSS 

CallForwarding‐Off‐PremiseSSSS 

CallMonitoringSESS 

CallWaiting/CampOnSSSS 

CallbackSSSS 

CallerIDSSESAdded"FlexibleRingingby

CallerID"

Document No. SIB 244 Page 6of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

CallerIDCallReturnSSSS 

CentralOfficeCalls,AnsweringSSSS 

CentralOfficeCalls,PlacingSSSS 

ClassofServiceSESS 

Clock/CalendarDisplaySSES 

CodeRestrictionSSSS 

CodeRestrictionOverrideSSSS

CodeRestriction,DialBlockSSSS 

ComputerTelephonyIntegration

(CTI)ApplicationsSSSS 

ConferenceSSSSAddedtheabilityfor"Silent

Monitor”onaConference

ConferenceBridgeSSSXPlannedforRelease2

Conference,VoiceCall/Privacy

ReleaseSSSS 

ContinuedDiallingSSSS 

CordlessTelephoneConnectionSSSS 

DataLineSecuritySSSS 

DelayedRingingSSSS 

DepartmentCallingSSSS 

DepartmentStepCallingSSSS 

DesktopApplications(SP310Soft

Phone,PCAttendant,PCAssistant)SEES

DiallingNumberPreviewSSSS 

DialPadConfirmationToneSSSS

DialToneDetectionSSSS 

DigitalVoiceMailSSSS 

DirectInwardDialling(DID)SESS 

DirectInwardLine(DIL)SSSS 

DirectInwardSystemAccess(DISA)SSSS 

DirectStationSelection(DSS)

ConsoleSESS 

DirectedCallPickupSSSS 

DirectoryDiallingSESS 

DistinctiveRinging,TonesandFlash

PatternsSESS 

DoNotDisturbSESS 

DoorPhoneSSSS 

DropKeySSSS 

DtermSeriesEMultilineTerminalsSSSXDTU/DTPmodelsnot

supported

DtermSeriesiMultilineTerminalsSSSS 

DtermSeriesUMultilineTerminals SSSS 

FacsimileCOBranchConnectionSSSS 

FlashSSSS 

FlexibleSystemNumberingSSSS 

FlexibleTimeoutsSSSS 

ForcedTrunkDisconnectSSSS

Document No. SIB 244 Page 7of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

GroupCallPickupSSSS 

GroupListenSSSS 

HandsetMuteSSSS 

HandsfreeandMonitorSSSS 

HandsfreeAnswerback/Forced

IntercomRingingSSSS 

HeadsetOperationSSSSDT300/DT700telephones

supportHeadsetRing

HoldSSSS 

Hotel/MotelSESS 

HotKeypadXESS 

HotlineSSSS 

HowlerToneServiceSSSS 

In‐MailXSSS 

IntercomSSSS 

IPMLT(ITH=MEGACO)SEEX 

IPMLT(ITL=i‐SIP)XXXS 

IPSLT(StandardSIP)XEES 

IPTrunk(SIP)XESS 

ISDNCompatibilitySSSS 

ISDNMaliciousCallTrace(MCT)SESS 

ISDNSupplementaryServicesSSSS 

K‐CCISoverIPSEES 

LastNumberRedialSSSS 

LicensingSESSAllfeatureandapplication

licensingisviatheCP00

LinePreferenceSSSS 

LongConversationCutoffSSSS 

MaintenanceXSSS

MeetMeConferenceSSSS 

MeetMePagingSSSS 

MeetMePagingTransferSSSS 

MemoDialSSSS 

MessageWaitingSESS 

MicrophoneCutoff(Mute)SSSS 

MigrationUpgradeSSSX 

MobileExtensionXXXS 

MultipleTrunkTypesSSSS 

MusiconHoldSSSS 

NameStoringSESS 

NightServiceSSSS 

OffHookSignallingSSSS 

One‐DigitDialOption(ACD)XESS 

One‐TouchCallingSSSS 

OperatorSESS 

Off‐PremiseExtension(OPX)SSSS 

Paging,ExternalSSSS 

Paging,InternalSSSS 

Document No. SIB 244 Page 8of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

ParkSESS 

PBXCompatibilitySSSS 

PCAssistantSESS

PCAttendantSESS

PCProgrammingSEES

PowerFailureTransferSSSS 

PrimeLineSelectionSSSS

PrivateLineSSSS 

ProgrammableFunctionKeysSESS 

ProgrammingfromMultiline

TerminalSSSS 

PulsetoToneConversionSSSS 

QuickTransfertoVoiceMailSESS 

RedialKeySSSS 

RemoteSystemUpgradeSSSS 

RepeatRedialSSSS 

ResidentSystemProgramSSSS 

ReverseVoiceOverSSSS

RingGroupsSESS 

SaveNumberDialledSSSS 

SecondaryIncomingExtensionSSSS 

SecretaryCall(Buzzer)SSSS 

SecretaryCallPickupSSSS 

SelectableDisplayMessagingSSSS 

SelectableRingTonesSSSS 

SerialCallSSSS 

SingleLineTelephones(SLT)SSSS 

SLTAdapterSSSXSLTAdaptordiscontinued,in

favourofCD‐LTA

SNMP(SimpleNetwork

ManagementProtocol)XEEXNotavailableatR1

SoftkeysSSSS 

SpeedDial–System/Group/StationSSSS 

StationHuntSSSS 

StationMessageDetailRecordingSSSS 

StationNameAssignmentSSSS 

StationRelocationSSSS 

SynchronousRingingSSSS

TandemRingingSSSS 

TandemTrunking(Unsupervised

Conference)SSSS 

TAPICompatibilitySESSSupports1st&3rdPartyTAPI

&ADAforVoicePath

ToneOverrideSSSS 

TrafficReportsSSSSPCProprovidesTrafficReports

TransferSESS 

TrunkGroupRoutingSSSS 

TrunkGroupsSSSS 

Document No. SIB 244 Page 9of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

TrunkQueuing/CampOnSSSS 

UnifiedMessagingSSSS 

UniformCallDistribution(UCD)SSSS 

UniformNumberingNetworkSSSS 

UniversalSlotsSESS 

UserProgrammingAbilitySSSSWebProprovidesUser

ProgrammingAbility

VirtualExtensionsSESS 

VoiceMailIntegration(Analogue)SEES 

VoiceMailMessageIndicationon

LineKeysSSSS 

VoiceOverSSSS 

VoiceOverInternetProtocol(VoIP)SSSS 

VoiceResponseSystem(VRS)SSSSVRS&In‐Mailarecombined

VolumeControlsSSSS 

WarningTone–LongConversationSSSS 

Wireless–DECT(BSU)SSSX 

Wireless–DECT(SIP)XXXS 

Document No. SIB 244 Page 10 of 52 1

st July 2008

NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document.

The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products

described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd.

This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC

Australia Pty Ltd.

Software Versions



PackageApplicationVersionFiles

CD‐CP00‐AUMainSoftware1.00

CPUDSPFirmware7920

PZ‐VM21Firmware8320

PZ‐BS10/BS11Firmware7915

CD/PZ‐8/16DLCFirmware2.2122211

CD/PZ‐4/8LCFirmware2.5202511

CD/PZ‐4/8COTFirmware 2.3 302311

CD‐4DIOPFirmware2.2402211

CD‐4ODTFirmware2.1502111

CD/PZ‐4BRIFirmware2.3602313

602323

602333

CD‐PRTFirmware2.4702413

702423

702433

CD‐LTAFirmware2.31B2313

1B2323

1B2333

PCProPCApplication1.00.00

3rdPartyTAPIDriverPCDriver1.0.1

1stPartyTAPIDriverPCDriver1.0.1

ACD‐MISPCApplication1.00RC2

SP310SoftPhonePCApplication 

SmartPhonePCApplication 

DT300DigitalTerminalsFirmware1.35

DT700IPTerminalsFirmware1.3.0.0



CD‐CP00‐AUMainSoftware



AsingleversionofmainsoftwarewillbeprovidedfortheSV8100CD‐CP00‐AU(CPU).Capacity,featuresand

functionalityprovidedbythissoftwarewillbeconfiguredviaactivationcodes(licenses).



Toincreasecapacitybeyondasinglechassisor64ports,thePZ‐ME50‐AUMemoryModuleandlicensingis

required.Whenthisisinstalled,theCPUwillrun“mainex.bin”offthePZ‐ME50,ratherthan“main.bin”offthe

CP00.Bothareprovidedwithineachsoftwarepackage.



SoftwarecanbeinstalledontotheCPUusingoneofthefollowingmethods:

•DirectviaUSBMemoryStick

•RemoteviaDialupModem(PZ‐VM21required)

•RemoteviaLAN(licensemayberequired)

Andere Handbücher für Univerge SV8100

Inhaltsverzeichnis

Andere NEC Server Handbücher

NEC

NEC Express5800/AD106c Bedienungsanleitung

NEC

NEC 120Le Bedienungsanleitung

NEC

NEC Express5800/R120h-2E Bedienungsanleitung

NEC

NEC iLO 5 Bedienungsanleitung

NEC

NEC Express 5800/320Lb Montage- und Bedienungsanleitung

NEC

NEC SL1100 Bedienungsanleitung

NEC

NEC Express5800/R120g-2M Bedienungsanleitung

NEC

NEC Express5800/R320c-E4 Betriebsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC Express5800/R120h-1M 3rd-Gen Bedienungsanleitung

NEC

NEC Express 5800 Bedienungsanleitung

NEC

NEC EXP804 Bedienungsanleitung

NEC

NEC Univerge SV8100 Bedienungs- und Montageanleitung

NEC

NEC Express 5800 Bedienungsanleitung

NEC

NEC TM1200 Bedienungsanleitung

NEC

NEC Express5800/320Ma Gebrauchs- und Pflegehandbuch

NEC

NEC Express5800/120Rg-1 Bedienungsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC LE2200 Bedienungsanleitung

NEC

NEC N8100-2834F Betriebsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC NEC Express5800/R120d-2E Bedienungsanleitung

NEC

NEC Express5800/R320d-M4 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung