Neilsen CT0933 Bedienungsanleitung

ADJUATABLE STILTS

18’’-30” CT0933

24”-40” CT0934

OPERATING INSTRUCTIONS

Refer to the details of this direction before use.

ADJUATABLE STILTS

OPERATING INSTRUCTIONS

Refer to the details of this direction before use.

Please read carefully before assembly and use, it is essential to your

product.

ASSEMBLY

1. Loosen tube clamps.

2. Insert lower strut tubes up through the bottom of the tube clamps.

3. Attach lower strut tubes to the inter-lock bracket.

4. Connection with attached cap screw & nylon lock nut. Tighten well when assembly

is complete.

5. Slide the upper strut tubes down over the lower strut tubes and through the tube

clamps. Position so the leg bands are just above the large portion of the leg calves.

6. Position the tube clamps in the clamp bracket slots, according to your calf size, so

the stilts will stand straight when mounted, and tighten well. Attach the heel

brackets to the footplates.

OPERATING CAUTIONS

1. STRAP TIGHTENING

• The six holes in the footplate are used to adjust the distance between the footplate

and the heel bracket.

• Please buckle leg straps first, and then buckle arch and toe straps when wearing.

•Please unbuckle arch and toe straps first, and then unbuckle leg straps when

dismounting.

2. FORWARD/BACKWARD BLALNCE

•If stilts lean forward, loosen the tube clamps and rotate the leg-bands & strut tubes

toward the rear, and tighten clamps. This adjustment is to insure proper forward and

backward balance. The balance of stilts is controlled by its middle part of entire

spring assembly. Any artificially forward or backward pitch will destroy the balance.

Never bend leg bands.

•If your body leans forward when you are using the stilts,please adjust the spring

adjuster on the lower coil spring.

•Whereas, if your body leans backward, please adjust the spring adjuster on the

upper coil spring.

•The clamp brackets beside the tube clamps are used to keep the balance of the

stilts. In addition, workman could adjust the clamp brackets to make the stilts

suitable for the thickness of its shank.

3. HEIGHT ADJUSTMENT

Position the side pole holder in the side pole bracket solts according to your calf size.

So the stilts will stand straight when mounted.

Remove wing bolts. Evenly raise the stilt legs to the desired height, align the wing

blowholes in the legs and extension tubes, install wing bolts, and tighten well.

INSPECT BEFORE WORKING

Make certain the entire stilts are free of any sign of

damage or excessive wear, and

that all nuts and bolts are

tight. Special attention should be given to the entire strut

tube assembiles and wing bolts in this respect.

Made certain that each step completely clears the floor, as

you must never drag or

shuffle your feet. DonTs work in or

around loose wire, rope, electric cor

sacks, broken glass, couduit, etc.

The usage tools should put into saddlebag prepared

beforehand, to avoid taking the

tools with stilts unsafely.

damage or excessive wear, and

tight. Special attention should be given to the entire strut

you must never drag or

around loose wire, rope, electric cor

ds, paper

beforehand, to avoid taking the

MAINTENANCE

DO INSPECT STILTS THOROUGHLY BEFORE USE,

AND YOU SHOULD

MAINTAIN THE CALF:

•Lubricate the "action" spring components lightly

•Replacement of the fragile components

•Replacement of the nylon sleeves

•Replacement of the wing bolts

•Replacement of the arch straps

AND YOU SHOULD

NOTICE

1. Inspect stilts thoroughly before use, making sure that the structure is free of any

sign of damage, and there is no excessive wear at the connection points.

2. Replace any damaged or excessively worn stilts components before use.

3. Keep all straps tightly fastened and secured.

4. Fasten the upper leg strap first when putting on stilts.

5. Remove anything from the soles, which could cause loss of traction.

6. Walk only on suitable hard surface and level terrain.

7. Cover or guard floor openings, stairwells, etc.

8. Walk forward only, making a "U" turn to reverse your direction.

9. Remove stilts when climbing or descending stairs.

10. Receive assistance when picking up objects from the floor.

! CAUTION

Don't...wear stilts without having the proper instruction on the use of them

Don't...wear stilts that have damaged excessively worn or modified components.

Don't...walk on oily or otherwise slippery surfaces.

Don't...wear on sandy, rocky, uneven, muddy, or excessively soft terrain.

Don't...work in or around loose wire, rope, electric cords, paper sacks, broken glass,

conduit etc.

Don't...walk on secondary scaffolding, benches, planks, stools, etc.

Don't...carry heavy loads while walking on stilts.

Don't...run or walk fast on stilts.

Don't...wear stilts that are taller than necessary.

Don't...wear stilts while under the influence of drugs or alcohol.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

Made in China

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Neilsen Werkzeuge Handbücher

Neilsen

Neilsen CT4852 Bedienungsanleitung

Neilsen

Neilsen CT1509 Bedienungsanleitung

Neilsen

Neilsen CT4342 Bedienungsanleitung

Neilsen

Neilsen CT5271 Bedienungsanleitung

Neilsen

Neilsen CT4448 Betriebsanleitung

Neilsen

Neilsen CT4694 Bedienungsanleitung

Neilsen

Neilsen CT5823 Bedienungsanleitung

Neilsen

Neilsen NAH-A30B Bedienungsanleitung

Neilsen

Neilsen CT4188 Bedienungsanleitung

Neilsen

Neilsen CT1056 Bedienungsanleitung

Neilsen

Neilsen CT0729 Betriebsanleitung

Neilsen

Neilsen CT5202 Bedienungsanleitung

Neilsen

Neilsen CT2266 Bedienungsanleitung

Neilsen

Neilsen CT3073 Bedienungsanleitung

Neilsen

Neilsen CT4790 Bedienungsanleitung

Neilsen

Neilsen CT2102 Bedienungsanleitung

Neilsen

Neilsen CT1535 Bedienungsanleitung

Neilsen

Neilsen CT4794 Bedienungsanleitung

Neilsen

Neilsen CT0527 Bedienungsanleitung

Neilsen

Neilsen CT2737 Bedienungsanleitung

Neilsen

Neilsen CT4621 Bedienungsanleitung

Neilsen

Neilsen CT2247 Bedienungsanleitung

Neilsen

Neilsen OPEL VAUXHALL CT2909 Bedienungsanleitung

Neilsen

Neilsen CT1057 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung