Nera WILINK I Benutzerhandbuch

System Manual

WILINK I Modular Base Station

SW Version 2.0February 2006P/N 214360

Document Control

WILINK I MODULAR BASE STATION SYSTEM MANUAL

Document Control

No. Topic Description Version/Date Issued

1 General Base Station, Micro Base Station and

CPE have been divided to separate

manuals

SW Version 2.0,

January 2006

2 New Radio Bands

Sections 1.1, 1.5.1

New ODUs that support 3.3g, 3.6a

and 3.6b frequency bands

SW Version 2.0,

January 2006

3 Monitor/Telnet access

Sections 4.2.1, 4.5.2.1

3 access levels: Administrator,

Installer, Monitor

SW Version 2.0,

January 2006

4 Per Trap Configuration

Section4.4.3.4

Per trap configuration of Admin

Status, Severity and Suppression

Interval

SW Version 2.0,

January 2006

5 Multi Channels

Sections 4.4, 4.6, 4.7, 4.8

Support of Multi-Channels AU. Radio

Cluster, ODU, AU and Channel

entities, including new and modified

parameters.

SW Version 2.0,

January 2006

6 Frequency Bands File

Section 4.7.5

Separating availability of radio bands

(new HW) from SW releases.

SW Version 2.0,

January 2006

7 Cumulative Power On

Time

Sections 4.5.1, 4.8.4.1

Display of the cumulative power on

time for NPU and AU modules.

SW Version 2.0,

January 2006

8 Additional Back-Up Files

Section 4.5.2.5

Create/download Back Up Files for

Filtering parameters (including MAC

Address Deny List) and for Trap

Configuration.

SW Version 2.0,

January 2006

9 Performance Monitoring

Sections 4.5.4, 4.8.5,

4.9.6.4, 4.10.4.3.2

Improved counters for NPU, AU, SU

and Service

SW Version 2.0,

January 2006

10 SU Service Fault Status

Section 4.9.1

Indication of reason for service

denial: Loop problem or SU Duplicate

Name

SW Version 2.0,

January 2005

11 Configurable SU Name

Section 4.9.6.3.1.1

To enable a solution to situations with

Duplicate SU Names

SW Version 2.0,

January 2006

12 SU Estimated Distance

Section 4.9.1

Displaying for each SU its estimated

distance from the Base Station

SW Version 2.0,

January 2006

Document Control

WILINK I MODULAR BASE STATION SYSTEM MANUAL

iii

No. Topic Description Version/Date Issued

13 MAC Addresses Behind

Section 4.9.6.5

Displaying the list of MAC Addresses

(and VLAN IDs if applicable) of

devices behind SU

SW Version 2.0,

January 2006

14 Filtering

Sections 4.10.2, 4.10.4.8,

4.10.4.9, 4.10.4.10

Controlling traffic by

forwarding/discarding packets

according to a set of rules. Support of

L2 and L3/L4 filters. Filtering is per

interface (from either network or

wireless side)

SW Version 2.0,

January 2006

15 MAC Address Deny List

Sections 4.10.2, 4.10.4.11

Controlling traffic by discarding

packets to/from specific MAC

Addresses

SW Version 2.0,

January 2006

16 Hybrid VLAN Mode

Sections 4.10.1.5,

4.10.4.3.1.6

Enabling classification of both tagged

and untagged frames

SW Version 2.0,

January 2006

17 VLAN Transparency

Mode

Sections 4.10.1.5,

4.10.4.4.3

Defining the method of transferring

packets to the operator’s upstream

network

SW Version 2.0,

January 2006

18 Multicast VLAN

Sections 4.10.1.5,

4.10.4.5.6

Modified functionality. The feature is

needed only to support multiple

VLANs behind SUs that use a SW

version below 2.0. In SW version 2.0

and higher the SU handles multiple

VLANs by properly duplicating

messages.

SW Version 2.0,

January 2006

19 DRAP TTL Retries

Section 4.5.3.5

Parameter added in formal release of

SW version 1.5, defining the

maximum time before “dropping” the

gateway.

SW Version 2.0,

January 2006

20 Bridge Aging Time (Micro

Base station)

Section 4.5.3.4

Option of No Aging Time (null entry)

added

SW Version 2.0,

January 2006

Radio Frequency Interference Statement

WILINK I MODULAR BASE STATION SYSTEM MANUAL

Radio Frequency Interference Statement

The Subscriber Unit equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to ETSI EN 301 489-1 rules. These

limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a residential environment notwithstanding

use in commercial, business and industrial environments. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference

to radio communications.

The Base Station equipment has been tested and found to comply with the limits

for a class A digital device, pursuant to ETSI EN 301 489-1 rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in commercial, business and industrial environments. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at the user’s own expense.

R&TTE Compliance Statement

This equipment complies with the appropriate essential requirements of Article 3

of the R&TTE Directive 1999/5/EC.

Safety Considerations - General

For the following safety considerations, “Instrument” means the WILINK I units’

components and their cables.

Grounding

Base Station chassis and outdoor units are required to be bonded to protective

grounding using the bonding stud or screw provided with each unit.

Safety Considerations – DC Powered Equipment

CAUTION ATTENTION

Risk of electric shock and energy hazard.

Disconnecting one Power Interface Unit (PIU)

disconnects only one PIU module. To isolate the

Base Station completely, disconnect both PIUs.

Risque de décharge électrique et

d'electrocution.

La déconnection d'un seul module

d'alimentation (PIU) n'isole pas complètement la

Station de Base. Pour cela, il faut

impérativement débrancher les deux modules

d'alimentation (PIU).

Restricted Access Area: The DC powered equipment should only be installed in

a Restricted Access Area.

Lithium Battery

WILINK I MODULAR BASE STATION SYSTEM MANUAL

Installation Codes: The equipment must be installed according to the latest

edition of the country national electrical codes. For North America, equipment

must be installed in accordance with the US National Electrical Code and the

Canadian Electrical Code.

Overcurrent Protection: A readily accessible Listed branch circuit overcurrent

protective device, rated 40A, must be incorporated in the building wiring.

CAUTION: This equipment is designed to permit connection between the earthed

conductor of the DC supply circuit and the grounding conductor at the

equipment. See installation instructions.

The equipment must be connected directly to the DC Supply System

grounding electrode conductor.

All equipment in the immediate vicinity must be grounded in the same way,

and not be grounded elsewhere.

The DC supply system is to be local, i.e. within the same premises as the

equipment.

There shall be no disconnect device between the grounded circuit conductor

of the DC source (return) and the point of connection of the grounding

electrode conductor.

Lithium Battery

The battery on the NPU card is not intended for replacement.

Caution

To avoid electrical shock, do not perform any servicing unless you are qualified to

do so.

Line Voltage

Before connecting this instrument to the power line, make sure that the voltage of

the power source matches the requirements of the instrument.

Radio

The instrument transmits radio energy during normal operation. To avoid

possible harmful exposure to this energy, do not stand or work for extended

periods of time in front of its antenna. The long-term characteristics or the

possible physiological effects of radio frequency electromagnetic fields have not

been yet fully investigated.

Outdoor Units and Antennas Installation and Grounding

WILINK I MODULAR BASE STATION SYSTEM MANUAL

vii

Outdoor Units and Antennas Installation and Grounding

Ensure that outdoor units, antennas and supporting structures are properly

installed to eliminate any physical hazard to either people or property. Make sure

that the installation of the outdoor unit, antenna and cables is performed in

accordance with all relevant national and local building and safety codes. Even

where grounding is not mandatory according to applicable regulation and

national codes, it is highly recommended to ensure that the outdoor unit and the

antenna mast (when using external antenna) are grounded and suitable lightning

protection devices are used so as to provide protection against voltage surges and

static charges. In any event, The Supplier is not liable for any injury, damage or

regulation violations associated with or caused by installation, grounding or

lightning protection.

Disposal of Electronic and Electrical Waste

Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with

unsorted waste. Please contact your local recycling authority for disposal of this product.

About This Manual

This manual describes the WILINK I Base Station equipment Release 2.0 and

details how to install, operate and manage the system components.

This manual is intended for technicians responsible for installing, setting and

operating the WILINK I Base Station equipment, and for system administrators

responsible for managing the system.

This manual contains the following chapters and appendices:

Chapter 1 – System description: Describes the WILINK I system and its

components.

Chapter 2 – Installation: Describes how to install the Base Station system

components.

Chapter 3 – Commissioning: Describes how to configure basic parameters

and validate units’ operation.

Chapter 4 – Operation and Administration: Describes how to use the

Monitor application for configuring parameters, checking system status and

monitoring performance.

Appendix A – Software Upgrade: Describes how to load new software files

using TFTP, and how to switch to a new software version in WILINK I units.

Appendix B – Defining Service Profiles for Generic VoIP Gateways:

Describes the principles of defining Service Profiles for 3rd party generic

(non-DRAP-based) VoIP devices.

Contents

Chapter 1 - System Description.............................................................. 1

1.1 Introducing WILINK I.............................................................................................................. 2

1.2 Base Station Equipment........................................................................................................ 5

1.3 Networking Equipment .......................................................................................................... 9

1.4 Management Systems ........................................................................................................... 9

1.5 Specifications ...................................................................................................................... 12

Chapter 2 - Installation Guidelines....................................................... 23

2.1 Installing the AU-ODU.......................................................................................................... 24

2.2 Installing the Base Station Equipment................................................................................ 31

Chapter 3 - Commissioning .................................................................. 49

3.1 Configuring Basic Parameters of Base Station.................................................................. 50

3.2 Operation Verification.......................................................................................................... 52

Chapter 4 - Operation and Administration............................................ 57

4.1 WILINK I System Management ............................................................................................ 58

4.2 The Monitor Program........................................................................................................... 59

4.3 The NPU’s Main Menu.......................................................................................................... 62

4.4 Base Station Menu............................................................................................................... 64

4.5 NPU Menu............................................................................................................................. 71

4.6 Radio Cluster Menu ............................................................................................................. 86

4.7 ODU Menu ............................................................................................................................ 89

Contents

WILINK I MODULAR BASE STATION SYSTEM MANUAL

xii

4.8 AU Menu ...............................................................................................................................94

4.9 SU Menu..............................................................................................................................110

4.10 Services Menu ....................................................................................................................127

4.11 NPU Parameters Summary ................................................................................................166

Appendix A - Software Upgrade ..........................................................181

A.1 Before you Start .................................................................................................................182

A.2 File Loading Procedure......................................................................................................183

A.3 Completing the Software Upgrade (Switching Versions) .................................................184

Appendix B - Defining Service Profiles for Generic VoIP Gateways ...185

B.1 Introduction ........................................................................................................................186

B.2 1 POTS Basic VoIP G.729 Service Profile..........................................................................188

B.3 1 POTS Advanced VoIP G.729 Service Profile ..................................................................190

B.4 1 POTS Basic VoIP G.711 Service Profile..........................................................................192

B.5 1 POTS Advanced VoIP G.711 Service Profile ..................................................................194

Glossary ..............................................................................................197

Index ...................................................................................................209

Figures

Figure 1-1: WILINK I System Architecture ................................................................................................ 4

Figure 2-1: ODU Pole Installation Using Special Clamps........................................................................ 27

Figure 2-2: ODU Pole Installation Using Metal Bands............................................................................. 28

Figure 2-3: Bottom Panel of the AU-ODU............................................................................................... 29

Figure 2-4: WILINK I-BST-SH Chassis Slot Assignments ....................................................................... 32

Figure 2-5: PIU Module Front Panel....................................................................................................... 34

Figure 2-6: PSU Module Front Panel ..................................................................................................... 37

Figure 2-7: AU-IDU Module Front Panel................................................................................................. 38

Figure 2-8: NPU Module Front Panel ..................................................................................................... 40

Figure 2-9: AVU Drawer Front Panel...................................................................................................... 46

Figure 4-1: NPU Monitor’s Main Menu ................................................................................................... 62

Figure 4-2: Base Station Chassis Slot Assignments ............................................................................... 65

Figure 4-3: Uplink and Downlink Scheduled Transmissions.................................................................. 125

Figure 4-4: Filtering Functionality ......................................................................................................... 134

Inhaltsverzeichnis

Andere Nera Zubehör Handbücher

Nera

Nera WiLink-I Series Benutzerhandbuch

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung