NetApp FAS2700 Series Handbuch

Prepare for installation Install hardware Cable storage Complete system setup

and conﬁguration

1 2 3 4

AFF A220 or

FAS2700 Systems

Installation and Setup Instructions

Prepare for installation |Stage 1

You provide

In the box

Pre-setup

1. Click mysupport.netapp.com and then create/log in to your account, download and install Active IQ Conﬁg Advisor,

and register your system. 

2. Unpack all boxes and inventory contents. For more cable information and part numbers, see the Hardware Universe.

3. Go to the AFF and FAS System Documentation Center and click AFF A220 and FAS2700 systems, and then Installation and Setup:

- Download and complete the Cluster Conﬁguration Worksheet.

- Watch the videos listed under Setup videos.

Storage cables

mini-SAS HD to mini-SAS HD cables

Part number X66030A (112-00435) or X66031A (112-00436)

or X66032A (112-00437) or X66033A (112-00438)

Additional cables

Power cables

Ethernet cables micro USB console cable

Screwdriver

Phillips #2

Laptop or console

With USB/serial connect or direct

switch connect and access to a Web browser

to conﬁgure your storage system

Rack space

2U per chassis

Additional network cables

For connecting your storage system to your

network switch and laptop or console.

Cluster Interconnect cables

Part number X6566B-05-R6 (112-00297)

or X6566B-2-R6 (112-00299)

10 GbE network cables

(order dependent)

Part number X6566B-2-R6 (112-00299) or

X6566B-3-R6 (112-00300) or X6566B-5-R6 (112-00301)

Optical network cables (order dependent)

Part number X6553-R6 (112-00188) or

X6554-R6 (112-00189) or X6536-R6 (112-00090)

Data and cluster Interconnect cables

CAT6 RJ-45 cables

Part number X6585-R6 (112-00291)

or X6562-R6 (112-00196)

Uniﬁed conﬁguration (order dependent)

Ethernet conﬁguration (order dependent)

215-13080_E0

Install hardware |Stage 2

• Install the rail or telco tray kits, as needed, and then install and secure your

system using the instructions included with the kit, or see the 42U 1280 mm

System Cabinet Guide for cabinet installation.

• Attach cable management devices to the back of each controller (as shown).

• Place the bezel on the front of the system.

Install system in a rack or cabinet

1LIFTING HAZARD

CAUTION

≥25 kg (≥56 lbs.)

Back of

the controller

Power cables

3Connect both power cords

Retaining clipsRetaining clips

Cable controller for switchless or switched cluster

See your network administrator for help connecting to your switches.

Connect the power cables to both power supplies.

• Use the retaining clips.

• Connect power cables to dierent power sources.

DO NOT turn on the power supply switches.

For switchless cluster

Connect port e0a to port e0a and port e0b to port e0b.

For switched cluster

Connect port e0a and port e0b on each controller

to the cluster interconnect switches.

On each controller, connect ports e0c/0c and e0d/0d

OR ports e0e/0e and e0f/0f to the FC host network

switches.

On each controller, connect ports e0c and e0e

OR ports e0d and e0f to the data network switches.

Connect the wrench port (e0M + BMC) on both

controller modules to the management subnet switches.

Strap the cables to the cable management arms.

(not shown)

Ethernet cables

CAT6 RJ-45 cables

Cluster interconnect cables

10 GbE

network

cables

Optical

network

cables

For Uniﬁed conﬁguration

For Ethernet conﬁguration

AC AC

To cluster interconnect

switches

To data network

switches

To management

network switches

Switchless cluster

Switched cluster

Uniﬁed

conﬁguration

Uniﬁed

conﬁguration

To data network

switches

To management

network switches

Attention: Be sure to check the illustration arrow for the proper cable connector pull-tab orientation.

Note: To unplug a cable, gently pull the tab to release the locking mechanism.

Pull-tab

Note: The illustrations below show the Uniﬁed conﬁguration system. The cluster and management network cabling remain the

same for an Ethernet conﬁguration system. You will be using cables with RJ-45 connectors instead to connect to 10GbE switches.

Cable storage |Stage 3

Cabling an AFF A220 or FAS2700 series

WITH external storage (DS224C)

Connect the shelf-to-shelf ports

Connect each node to IOM A in the stack

Connect each node to IOM B in the stack

Storage cables

AC AC

IOM12

L N K L N K

IOM12

L N K L N K

IOM12

L N K L N K

IOM12

L N K L N K

IOM12

L N K L N K

IOM12

L N K L N K

AC AC

First

shelf

IOMA

Last

shelf

IOMB

Dual controller system FAS2700 or AFF A220

Attention: Be sure to check the illustration arrow for the proper cable connector pull-tab orientation.

Note: To unplug a cable, gently pull the tab to release the locking mechanism.

Pull-tab

2Complete initial cluster setup:

1. Make sure that your laptop has network discovery enabled. See your laptop’s help for more information.

2. Connect your laptop to the Management switch.

3. Go to network devices and double-click either ONTAP icon.

Note: Accept any certiﬁcates displayed on your screen.

If your laptop has network discovery enabled:

OPTION

If your laptop does not have network discovery enabled:

OPTION

Ensure the controller modules are completely cabled and then turn the power supplies.

Management subnet

Laptop

3Use System Manager Guided Setup to conﬁgure your cluster

4Completing setup

1. Verify the health of your system by running Conﬁg Advisor.

2. After you have completed the initial conﬁguration, go to the NetApp ONTAP Resources page for information

about conﬁguring additional features in ONTAP.

Set the console port on the laptop to 115,200 baud

with N-8-1, connect to the micro-USB port on the

controller with the console cable.

Connect the laptop to the Management

switch and give the laptop a TCP/IP

address on the management switch

Assign an initial node management IP address to one

of the nodes. If you have DHCP conﬁgured on your management network, record the IP address assigned

to the new controllers. Otherwise use Cluster Setup wizard to assign the node management IP address.

a. Open a console session using PuTTY, a terminal server, or the equivalent for your environment.

b. Enter the management IP address when prompted by the script.

Open a browser and enter management IP address. (https://xxx.xxx.xxx.xxx)

micro USB console cable

Ethernet cable

If your system has one or more external drive shelves,

set the shelf IDs:

1. Power on the drive shelf, and then remove the end cap on the left of the shelf.

2. Press and hold the orange button until the ﬁrst digit blinks, and then press the button to advance

the ﬁrst digit (0-9) to the desired number. The ﬁrst digit continues to blink.

3. Press and hold the button until the second digit blinks, and then press the button to advance

the second digit (0-9) to the desired number. The ﬁrst digit stops blinking, and the second digit continues to blink.

4. Press and hold the button until the second digit stops blinking, and then replace the end cap on the shelf.

5. Wait about 10 seconds for both digits to start blinking again and for the LED to illuminate,

and then power-cycle the drive shelf to make the shelf ID take eect.

6. Repeat these steps for any remaining drive shelves.

Complete system setup and conﬁguration |Stage 4

AC AC

FAS2700 or AFF A220 system

Laptop

Management subnet 2

Andere Handbücher für FAS2700 Series

Dieses Handbuch passt für folgende Modelle

Andere NetApp Lagerung Handbücher

NetApp

NetApp DS4486 Handbuch

NetApp

NetApp AFF A400 Bedienungsanleitung

NetApp

NetApp SG100 Merkblatt

NetApp

NetApp H410S Handbuch

NetApp

NetApp FAS500f Bedienungsanleitung

NetApp

NetApp H410S Betriebsanleitung

NetApp

NetApp AFF A320 Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG5700 Series Betriebsanleitung

NetApp

NetApp AFF A400 Bedienungsanleitung

NetApp

NetApp FAS22 Series Bedienungsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp FAS2500 Gebrauchs- und Pflegehandbuch

NetApp

NetApp FAS8300 Bedienungsanleitung

NetApp

NetApp FAS9000 Handbuch

NetApp

NetApp StorageGRID SD100 Bedienungsanleitung

NetApp

NetApp DE6900 Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG5700 Series Betriebsanleitung

NetApp

NetApp FAS9500 Merkblatt

NetApp

NetApp StorageGRID Webscale SG5700 Series Merkblatt

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG6000 Series Bedienungsanleitung

NetApp

NetApp AFF A250 Bedienungsanleitung

NetApp

NetApp SolidFire C-Series Handbuch

NetApp

NetApp DE5600 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung