NETGEAR LM1300 Bedienungsanleitung

LTE Modem LM1300

Quick Start

Connect to the LTE network

To obtain an activated SIM card, contact your mobile

broadband service provider.

1. Ensure that power to the modem is off.

2. Align the nano SIM card with the notch toward the

nano SIM card slot and the chip side facing down.

3. Gently insert the nano SIM card into the nano SIM

card slot.

1. Connect the USB cable to the power port on the

modem and to the provided power adapter.

2. Plug the power adapter into an indoor power

outlet.

Note: We recommend connecting the USB

cable only to the power adapter that came in the

package. Connecting the USB cable to a USB port

on a computer might not work correctly.

The Power LED lights solid amber and then

lights solid green.

The modem searches for the mobile broadband

network available from the nano SIM, which might

take several minutes.

3. Check the Signal Strength LED .

• Green: The LTE connection is good.

• Amber: The LTE connection is weak. Try a

different location, such as near a window.

• Red: The nano SIM card isn’t inserted correctly,

or the modem can’t automatically connect

to the LTE network (see Add and activate a

custom APN prole).

What’s in the box

You can connect a router or a computer (with an

Ethernet port) to the LM1300 LAN port. Connecting

a WiFi router lets you use WiFi to access the LTE

network from a computer or WiFi device.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

The router now uses the LM1300 modem’s LTE

network as its main (primary) Internet connection.

2. For Internet access, connect your computer or

WiFi device to the router.

Rear panel

External antenna (TS9 ports)

Power

(USB Type C port)

Gigabit Ethernet ports

Nano SIM

card slot

Reset button

USB Type C

cable

Ethernet

cable

USB power adapter

LM1300

Modem

Power on your LM1300 modem Connect the LM1300 LAN port

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

July 2021

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-

policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree,

return the device to your place of purchase within your return period.

Regulatory and Legal

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference

purposes only.

LTE Modem LM1300

Quick Start

Connect to the LTE network

To obtain an activated SIM card, contact your mobile

broadband service provider.

1. Ensure that power to the modem is off.

2. Align the nano SIM card with the notch toward the

nano SIM card slot and the chip side facing down.

3. Gently insert the nano SIM card into the nano SIM

card slot.

1. Connect the USB cable to the power port on the

modem and to the provided power adapter.

2. Plug the power adapter into an indoor power

outlet.

Note: We recommend connecting the USB

cable only to the power adapter that came in the

package. Connecting the USB cable to a USB port

on a computer might not work correctly.

The Power LED lights solid amber and then

lights solid green.

The modem searches for the mobile broadband

network available from the nano SIM, which might

take several minutes.

3. Check the Signal Strength LED .

• Green: The LTE connection is good.

• Amber: The LTE connection is weak. Try a

different location, such as near a window.

• Red: The nano SIM card isn’t inserted correctly,

or the modem can’t automatically connect

to the LTE network (see Add and activate a

custom APN prole).

What’s in the box

You can connect a router or a computer (with an

Ethernet port) to the LM1300 LAN port. Connecting

a WiFi router lets you use WiFi to access the LTE

network from a computer or WiFi device.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

The router now uses the LM1300 modem’s LTE

network as its main (primary) Internet connection.

2. For Internet access, connect your computer or

WiFi device to the router.

Rear panel

External antenna (TS9 ports)

Power

(USB Type C port)

Gigabit Ethernet ports

Nano SIM

card slot

Reset button

USB Type C

cable

Ethernet

cable

USB power adapter

LM1300

Modem

Power on your LM1300 modem Connect the LM1300 LAN port

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

July 2021

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-

policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree,

return the device to your place of purchase within your return period.

Regulatory and Legal

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference

purposes only.

LTE Modem LM1300

Quick Start

Connect to the LTE network

To obtain an activated SIM card, contact your mobile

broadband service provider.

1. Ensure that power to the modem is off.

2. Align the nano SIM card with the notch toward the

nano SIM card slot and the chip side facing down.

3. Gently insert the nano SIM card into the nano SIM

card slot.

1. Connect the USB cable to the power port on the

modem and to the provided power adapter.

2. Plug the power adapter into an indoor power

outlet.

Note: We recommend connecting the USB

cable only to the power adapter that came in the

package. Connecting the USB cable to a USB port

on a computer might not work correctly.

The Power LED lights solid amber and then

lights solid green.

The modem searches for the mobile broadband

network available from the nano SIM, which might

take several minutes.

3. Check the Signal Strength LED .

• Green: The LTE connection is good.

• Amber: The LTE connection is weak. Try a

different location, such as near a window.

• Red: The nano SIM card isn’t inserted correctly,

or the modem can’t automatically connect

to the LTE network (see Add and activate a

custom APN prole).

What’s in the box

You can connect a router or a computer (with an

Ethernet port) to the LM1300 LAN port. Connecting

a WiFi router lets you use WiFi to access the LTE

network from a computer or WiFi device.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

The router now uses the LM1300 modem’s LTE

network as its main (primary) Internet connection.

2. For Internet access, connect your computer or

WiFi device to the router.

Rear panel

External antenna (TS9 ports)

Power

(USB Type C port)

Gigabit Ethernet ports

Nano SIM

card slot

Reset button

USB Type C

cable

Ethernet

cable

USB power adapter

LM1300

Modem

Power on your LM1300 modem Connect the LM1300 LAN port

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

July 2021

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-

policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree,

return the device to your place of purchase within your return period.

Regulatory and Legal

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference

purposes only.

LTE Modem LM1300

Quick Start

Connect to the LTE network

To obtain an activated SIM card, contact your mobile

broadband service provider.

1. Ensure that power to the modem is off.

2. Align the nano SIM card with the notch toward the

nano SIM card slot and the chip side facing down.

3. Gently insert the nano SIM card into the nano SIM

card slot.

1. Connect the USB cable to the power port on the

modem and to the provided power adapter.

2. Plug the power adapter into an indoor power

outlet.

Note: We recommend connecting the USB

cable only to the power adapter that came in the

package. Connecting the USB cable to a USB port

on a computer might not work correctly.

The Power LED lights solid amber and then

lights solid green.

The modem searches for the mobile broadband

network available from the nano SIM, which might

take several minutes.

3. Check the Signal Strength LED .

• Green: The LTE connection is good.

• Amber: The LTE connection is weak. Try a

different location, such as near a window.

• Red: The nano SIM card isn’t inserted correctly,

or the modem can’t automatically connect

to the LTE network (see Add and activate a

custom APN prole).

What’s in the box

You can connect a router or a computer (with an

Ethernet port) to the LM1300 LAN port. Connecting

a WiFi router lets you use WiFi to access the LTE

network from a computer or WiFi device.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

The router now uses the LM1300 modem’s LTE

network as its main (primary) Internet connection.

2. For Internet access, connect your computer or

WiFi device to the router.

Rear panel

External antenna (TS9 ports)

Power

(USB Type C port)

Gigabit Ethernet ports

Nano SIM

card slot

Reset button

USB Type C

cable

Ethernet

cable

USB power adapter

LM1300

Modem

Power on your LM1300 modem Connect the LM1300 LAN port

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

July 2021

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-

policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree,

return the device to your place of purchase within your return period.

Regulatory and Legal

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference

purposes only.

LTE Modem LM1300

Quick Start

Connect to the LTE network

To obtain an activated SIM card, contact your mobile

broadband service provider.

1. Ensure that power to the modem is off.

2. Align the nano SIM card with the notch toward the

nano SIM card slot and the chip side facing down.

3. Gently insert the nano SIM card into the nano SIM

card slot.

1. Connect the USB cable to the power port on the

modem and to the provided power adapter.

2. Plug the power adapter into an indoor power

outlet.

Note: We recommend connecting the USB

cable only to the power adapter that came in the

package. Connecting the USB cable to a USB port

on a computer might not work correctly.

The Power LED lights solid amber and then

lights solid green.

The modem searches for the mobile broadband

network available from the nano SIM, which might

take several minutes.

3. Check the Signal Strength LED .

• Green: The LTE connection is good.

• Amber: The LTE connection is weak. Try a

different location, such as near a window.

• Red: The nano SIM card isn’t inserted correctly,

or the modem can’t automatically connect

to the LTE network (see Add and activate a

custom APN prole).

What’s in the box

You can connect a router or a computer (with an

Ethernet port) to the LM1300 LAN port. Connecting

a WiFi router lets you use WiFi to access the LTE

network from a computer or WiFi device.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

The router now uses the LM1300 modem’s LTE

network as its main (primary) Internet connection.

2. For Internet access, connect your computer or

WiFi device to the router.

Rear panel

External antenna (TS9 ports)

Power

(USB Type C port)

Gigabit Ethernet ports

Nano SIM

card slot

Reset button

USB Type C

cable

Ethernet

cable

USB power adapter

LM1300

Modem

Power on your LM1300 modem Connect the LM1300 LAN port

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

July 2021

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-

policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree,

return the device to your place of purchase within your return period.

Regulatory and Legal

NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference

purposes only.

You can log in to your LM1300 modem to view and

change its settings from a computer or a device that

is connected to the modem with an Ethernet cable or

WiFi.

1. Launch a web browser from the connected

computer or device.

2. In the address eld of the web browser, enter

http://192.168.5.1.

3. In the Sign In eld, enter the default password,

and click the Sign In button.

See the modem label for the default password.

Note: While the password that you enter is unique to

your modem and is secure, we recommend that you

change it to a password that you want to use.

Manage your LM1300 modem

If the LM1300 modem does not automatically connect

to your mobile broadband network, contact your

mobile service provider for the APN prole that they

require. Then log in to the modem and enter the

custom APN prole settings.

1. Launch a web browser from a computer or mobile

device that is connected to the modem.

2. In the address eld of the web browser, enter

http://192.168.5.1.

The limited Dashboard page displays.

3. In the Sign In eld, enter the password, and click

the Sign In button.

See the modem label for the default password.

4. Select Settings > Network > APN.

The APN page displays.

5. Click the Add button.

The New APN section opens on the page.

Add and activate a

custom APN prole

6. Enter the settings for the new APN prole.

Use the information that your mobile service

provider gave you. If your mobile service provider

did not specify some settings, leave the default

settings.

7. Click the Save button.

The new APN prole displays on the page, but is

not yet the active prole.

8. Select the radio button next to the APN prole

that you just added.

The modem now uses the selected APN prole

to establish a connection with your mobile

broadband service provider’s network.

If you still cannot get an Internet connection,

contact your mobile broadband service provider

to verify the information for the APN prole.

The LEDs on the LM1300 modem indicate its status

and activity.

LED Description

Power • Solid amber: The modem is starting up.

• Solid green: The modem is powered on.

• Blinking amber: Device error.

Ethernet

LAN

• Solid amber: A device is connecting to this

port.

• Green: A device is connected to this port.

Ethernet

WAN

• Solid amber: A device is connected to this

port.

• Solid green: Full data connectivity.

Signal

Strength

• Green: The LTE connection is good. Blinking

indicates data trafc.

• Amber: The LTE connection is weak. Blinking

indicates data trafc.

• Red: The modem can’t connect to the LTE

network.

LEDs

Visit netgear.com/support to get your questions

answered and access the latest downloads.

You can also check out our NETGEAR Community for

helpful advice at community.netgear.com.

Support and Community

With this setup, your wired modem (cable, DSL, or

ber) provides the primary Internet access. If the wired

Internet connection isn’t working, the LM1300 modem

provides a failover Internet connection through the

LTE network.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

2. Use another Ethernet cable (not included) to

connect your wired modem (cable, DSL, or ber)

to the LM1300 WAN port.

3. Log in to the LM1300 modem and enable WAN

failover.

For information about how to set up WAN failover,

see the LM1300 user manual.

Optional: set up WAN failover

for a wired modem

You can log in to your LM1300 modem to view and

change its settings from a computer or a device that

is connected to the modem with an Ethernet cable or

WiFi.

1. Launch a web browser from the connected

computer or device.

2. In the address eld of the web browser, enter

http://192.168.5.1.

3. In the Sign In eld, enter the default password,

and click the Sign In button.

See the modem label for the default password.

Note: While the password that you enter is unique to

your modem and is secure, we recommend that you

change it to a password that you want to use.

Manage your LM1300 modem

If the LM1300 modem does not automatically connect

to your mobile broadband network, contact your

mobile service provider for the APN prole that they

require. Then log in to the modem and enter the

custom APN prole settings.

1. Launch a web browser from a computer or mobile

device that is connected to the modem.

2. In the address eld of the web browser, enter

http://192.168.5.1.

The limited Dashboard page displays.

3. In the Sign In eld, enter the password, and click

the Sign In button.

See the modem label for the default password.

4. Select Settings > Network > APN.

The APN page displays.

5. Click the Add button.

The New APN section opens on the page.

Add and activate a

custom APN prole

6. Enter the settings for the new APN prole.

Use the information that your mobile service

provider gave you. If your mobile service provider

did not specify some settings, leave the default

settings.

7. Click the Save button.

The new APN prole displays on the page, but is

not yet the active prole.

8. Select the radio button next to the APN prole

that you just added.

The modem now uses the selected APN prole

to establish a connection with your mobile

broadband service provider’s network.

If you still cannot get an Internet connection,

contact your mobile broadband service provider

to verify the information for the APN prole.

The LEDs on the LM1300 modem indicate its status

and activity.

LED Description

Power • Solid amber: The modem is starting up.

• Solid green: The modem is powered on.

• Blinking amber: Device error.

Ethernet

LAN

• Solid amber: A device is connecting to this

port.

• Green: A device is connected to this port.

Ethernet

WAN

• Solid amber: A device is connected to this

port.

• Solid green: Full data connectivity.

Signal

Strength

• Green: The LTE connection is good. Blinking

indicates data trafc.

• Amber: The LTE connection is weak. Blinking

indicates data trafc.

• Red: The modem can’t connect to the LTE

network.

LEDs

Visit netgear.com/support to get your questions

answered and access the latest downloads.

You can also check out our NETGEAR Community for

helpful advice at community.netgear.com.

Support and Community

With this setup, your wired modem (cable, DSL, or

ber) provides the primary Internet access. If the wired

Internet connection isn’t working, the LM1300 modem

provides a failover Internet connection through the

LTE network.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

2. Use another Ethernet cable (not included) to

connect your wired modem (cable, DSL, or ber)

to the LM1300 WAN port.

3. Log in to the LM1300 modem and enable WAN

failover.

For information about how to set up WAN failover,

see the LM1300 user manual.

Optional: set up WAN failover

for a wired modem

You can log in to your LM1300 modem to view and

change its settings from a computer or a device that

is connected to the modem with an Ethernet cable or

WiFi.

1. Launch a web browser from the connected

computer or device.

2. In the address eld of the web browser, enter

http://192.168.5.1.

3. In the Sign In eld, enter the default password,

and click the Sign In button.

See the modem label for the default password.

Note: While the password that you enter is unique to

your modem and is secure, we recommend that you

change it to a password that you want to use.

Manage your LM1300 modem

If the LM1300 modem does not automatically connect

to your mobile broadband network, contact your

mobile service provider for the APN prole that they

require. Then log in to the modem and enter the

custom APN prole settings.

1. Launch a web browser from a computer or mobile

device that is connected to the modem.

2. In the address eld of the web browser, enter

http://192.168.5.1.

The limited Dashboard page displays.

3. In the Sign In eld, enter the password, and click

the Sign In button.

See the modem label for the default password.

4. Select Settings > Network > APN.

The APN page displays.

5. Click the Add button.

The New APN section opens on the page.

Add and activate a

custom APN prole

6. Enter the settings for the new APN prole.

Use the information that your mobile service

provider gave you. If your mobile service provider

did not specify some settings, leave the default

settings.

7. Click the Save button.

The new APN prole displays on the page, but is

not yet the active prole.

8. Select the radio button next to the APN prole

that you just added.

The modem now uses the selected APN prole

to establish a connection with your mobile

broadband service provider’s network.

If you still cannot get an Internet connection,

contact your mobile broadband service provider

to verify the information for the APN prole.

The LEDs on the LM1300 modem indicate its status

and activity.

LED Description

Power • Solid amber: The modem is starting up.

• Solid green: The modem is powered on.

• Blinking amber: Device error.

Ethernet

LAN

• Solid amber: A device is connecting to this

port.

• Green: A device is connected to this port.

Ethernet

WAN

• Solid amber: A device is connected to this

port.

• Solid green: Full data connectivity.

Signal

Strength

• Green: The LTE connection is good. Blinking

indicates data trafc.

• Amber: The LTE connection is weak. Blinking

indicates data trafc.

• Red: The modem can’t connect to the LTE

network.

LEDs

Visit netgear.com/support to get your questions

answered and access the latest downloads.

You can also check out our NETGEAR Community for

helpful advice at community.netgear.com.

Support and Community

With this setup, your wired modem (cable, DSL, or

ber) provides the primary Internet access. If the wired

Internet connection isn’t working, the LM1300 modem

provides a failover Internet connection through the

LTE network.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

2. Use another Ethernet cable (not included) to

connect your wired modem (cable, DSL, or ber)

to the LM1300 WAN port.

3. Log in to the LM1300 modem and enable WAN

failover.

For information about how to set up WAN failover,

see the LM1300 user manual.

Optional: set up WAN failover

for a wired modem

You can log in to your LM1300 modem to view and

change its settings from a computer or a device that

is connected to the modem with an Ethernet cable or

WiFi.

1. Launch a web browser from the connected

computer or device.

2. In the address eld of the web browser, enter

http://192.168.5.1.

3. In the Sign In eld, enter the default password,

and click the Sign In button.

See the modem label for the default password.

Note: While the password that you enter is unique to

your modem and is secure, we recommend that you

change it to a password that you want to use.

Manage your LM1300 modem

If the LM1300 modem does not automatically connect

to your mobile broadband network, contact your

mobile service provider for the APN prole that they

require. Then log in to the modem and enter the

custom APN prole settings.

1. Launch a web browser from a computer or mobile

device that is connected to the modem.

2. In the address eld of the web browser, enter

http://192.168.5.1.

The limited Dashboard page displays.

3. In the Sign In eld, enter the password, and click

the Sign In button.

See the modem label for the default password.

4. Select Settings > Network > APN.

The APN page displays.

5. Click the Add button.

The New APN section opens on the page.

Add and activate a

custom APN prole

6. Enter the settings for the new APN prole.

Use the information that your mobile service

provider gave you. If your mobile service provider

did not specify some settings, leave the default

settings.

7. Click the Save button.

The new APN prole displays on the page, but is

not yet the active prole.

8. Select the radio button next to the APN prole

that you just added.

The modem now uses the selected APN prole

to establish a connection with your mobile

broadband service provider’s network.

If you still cannot get an Internet connection,

contact your mobile broadband service provider

to verify the information for the APN prole.

The LEDs on the LM1300 modem indicate its status

and activity.

LED Description

Power • Solid amber: The modem is starting up.

• Solid green: The modem is powered on.

• Blinking amber: Device error.

Ethernet

LAN

• Solid amber: A device is connecting to this

port.

• Green: A device is connected to this port.

Ethernet

WAN

• Solid amber: A device is connected to this

port.

• Solid green: Full data connectivity.

Signal

Strength

• Green: The LTE connection is good. Blinking

indicates data trafc.

• Amber: The LTE connection is weak. Blinking

indicates data trafc.

• Red: The modem can’t connect to the LTE

network.

LEDs

Visit netgear.com/support to get your questions

answered and access the latest downloads.

You can also check out our NETGEAR Community for

helpful advice at community.netgear.com.

Support and Community

With this setup, your wired modem (cable, DSL, or

ber) provides the primary Internet access. If the wired

Internet connection isn’t working, the LM1300 modem

provides a failover Internet connection through the

LTE network.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

2. Use another Ethernet cable (not included) to

connect your wired modem (cable, DSL, or ber)

to the LM1300 WAN port.

3. Log in to the LM1300 modem and enable WAN

failover.

For information about how to set up WAN failover,

see the LM1300 user manual.

Optional: set up WAN failover

for a wired modem

You can log in to your LM1300 modem to view and

change its settings from a computer or a device that

is connected to the modem with an Ethernet cable or

WiFi.

1. Launch a web browser from the connected

computer or device.

2. In the address eld of the web browser, enter

http://192.168.5.1.

3. In the Sign In eld, enter the default password,

and click the Sign In button.

See the modem label for the default password.

Note: While the password that you enter is unique to

your modem and is secure, we recommend that you

change it to a password that you want to use.

Manage your LM1300 modem

If the LM1300 modem does not automatically connect

to your mobile broadband network, contact your

mobile service provider for the APN prole that they

require. Then log in to the modem and enter the

custom APN prole settings.

1. Launch a web browser from a computer or mobile

device that is connected to the modem.

2. In the address eld of the web browser, enter

http://192.168.5.1.

The limited Dashboard page displays.

3. In the Sign In eld, enter the password, and click

the Sign In button.

See the modem label for the default password.

4. Select Settings > Network > APN.

The APN page displays.

5. Click the Add button.

The New APN section opens on the page.

Add and activate a

custom APN prole

6. Enter the settings for the new APN prole.

Use the information that your mobile service

provider gave you. If your mobile service provider

did not specify some settings, leave the default

settings.

7. Click the Save button.

The new APN prole displays on the page, but is

not yet the active prole.

8. Select the radio button next to the APN prole

that you just added.

The modem now uses the selected APN prole

to establish a connection with your mobile

broadband service provider’s network.

If you still cannot get an Internet connection,

contact your mobile broadband service provider

to verify the information for the APN prole.

The LEDs on the LM1300 modem indicate its status

and activity.

LED Description

Power • Solid amber: The modem is starting up.

• Solid green: The modem is powered on.

• Blinking amber: Device error.

Ethernet

LAN

• Solid amber: A device is connecting to this

port.

• Green: A device is connected to this port.

Ethernet

WAN

• Solid amber: A device is connected to this

port.

• Solid green: Full data connectivity.

Signal

Strength

• Green: The LTE connection is good. Blinking

indicates data trafc.

• Amber: The LTE connection is weak. Blinking

indicates data trafc.

• Red: The modem can’t connect to the LTE

network.

LEDs

Visit netgear.com/support to get your questions

answered and access the latest downloads.

You can also check out our NETGEAR Community for

helpful advice at community.netgear.com.

Support and Community

With this setup, your wired modem (cable, DSL, or

ber) provides the primary Internet access. If the wired

Internet connection isn’t working, the LM1300 modem

provides a failover Internet connection through the

LTE network.

1. Connect the Ethernet cable to the LM1300 LAN

port and the WAN or Internet port on your router.

2. Use another Ethernet cable (not included) to

connect your wired modem (cable, DSL, or ber)

to the LM1300 WAN port.

3. Log in to the LM1300 modem and enable WAN

failover.

For information about how to set up WAN failover,

see the LM1300 user manual.

Optional: set up WAN failover

for a wired modem

Inhaltsverzeichnis

Andere NETGEAR Modem Handbücher

NETGEAR

NETGEAR A6200 Bedienungsanleitung

NETGEAR

NETGEAR DM111PSPv2 Bedienungsanleitung

NETGEAR

NETGEAR C6250 Bedienungsanleitung

NETGEAR

NETGEAR DM111PSP - ADSL2+ Ethernet Modem Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk CM2500 Bedienungsanleitung

NETGEAR

NETGEAR orbi CBR750 Bedienungsanleitung

NETGEAR

NETGEAR DOCSIS 3.0 C6220 Bedienungsanleitung

NETGEAR

NETGEAR CG814M Bedienungsanleitung

NETGEAR

NETGEAR CM500V Bedienungsanleitung

NETGEAR

NETGEAR DM111P - ADSL2+ Ethernet Modem Bedienungsanleitung

NETGEAR

NETGEAR DM200 Bedienungsanleitung

NETGEAR

NETGEAR CM400 Bedienungsanleitung

NETGEAR

NETGEAR AC329U Bedienungsanleitung

NETGEAR

NETGEAR CM600 Bedienungsanleitung

NETGEAR

NETGEAR CM400 Bedienungsanleitung

NETGEAR

NETGEAR AC327U Bedienungsanleitung

NETGEAR

NETGEAR DGND3700v2 Bedienungsanleitung

NETGEAR

NETGEAR GS908E Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk C7100V Bedienungsanleitung

NETGEAR

NETGEAR CM500V Bedienungsanleitung

NETGEAR

NETGEAR CM700 Bedienungsanleitung

NETGEAR

NETGEAR DM111P - ADSL2+ Ethernet Modem Benutzerhandbuch

NETGEAR

NETGEAR LB1120-100NAS Bedienungsanleitung

NETGEAR

NETGEAR LB1110 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung