NETGEAR WND930 Bedienungsanleitung

350 East Plumeria Drive

San Jose, CA 95134

USA

October 2014

202-11483-01

Outdoor High Power Wireless N

Access Point

Model WND930

Reference Manual

Outdoor High Power Wireless N Access Point

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product at

https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR

recommends registering your product through the NETGEAR website. For product updates and web support, visit

http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc.

and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice.

Contents

Chapter 1 Hardware Setup

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Unpack Your Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Product Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Cable the Access Point for Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Chapter 2 Initial Setup

Connect to the Access Point and Log In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Specify the Access Point Name and Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Set the Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configure the Basic IP Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Configure the Access Point as a DHCP Server for Wireless Clients . . . . . . . . . 14

Configure the Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Turn On the Wireless Signal and Test Connectivity . . . . . . . . . . . . . . . . . . . . . . . 18

Plan Your Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Set Up Security Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Deploy the Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Connect Optional External Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chapter 3 Network Settings

Spanning Tree Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Set Up a Schedule for the Wireless Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Configure MAC Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Configure RADIUS Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Configure Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Quality of Service Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Enable or Disable Wireless Multimedia QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Configure Advanced QoS Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Wireless Bridging and Repeating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Set Up a Wireless Point-to-Point Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Set Up a Wireless Point-to-Multi-Point Bridge . . . . . . . . . . . . . . . . . . . . . . . . 39

Disable Ethernet LLDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Chapter 4 Manage the Access Point

Change the admin Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Reboot the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Outdoor High Power Wireless N Access Point

Set Up a Remote Console. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Set UP SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Manage the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Back Up the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Restore the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Restore the Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Enable a Syslog Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Chapter 5 Monitoring

View System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

View Wireless Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

View the Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

View Network Traffic Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Enable Wireless Packet Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Chapter 6 Troubleshooting and Debugging

Troubleshooting with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

All LEDs Are Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

LAN LED Is Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

WLAN LED Is Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Cannot Connect to the Access Point to Configure It. . . . . . . . . . . . . . . . . . . . . . 59

Wireless Access to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Time-Out Error for URL or IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix A Supplemental Information

Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

1. Hardware Setup

This chapter covers the following topics:

•System Requirements

•Unpack Your Access Point

•Front Panel

•Product Label

•Cable the Access Point for Initial Setup

For more information about the topics covered in this manual, visit the support website at

http://support.netgear.com.

Firmware updates with new features and bug fixes are made available from time to time at

http://downloadcenter.netgear.com. Some products can regularly check the site and download

new firmware, or you can check for and download new firmware manually. If the features or

behavior of your product does not match what is described in this guide, you might need to

update your firmware.

Hardware Setup

Outdoor High Power Wireless N Access Point

System Requirements

Before installing the access point, make sure that your system includes the following:

•A 10/100/1000 Mbps local area network device such as a hub or switch, supporting IEEE

802.3af\ Power over Ethernet (PoE).

•The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the

package, or one like it

•A web browser for configuration

•At least one computer with the TCP/IP protocol installed

•802.11b/g/n-compliant or 802.11a/n-compliant devices

Unpack Your Access Point

Your package contains the following items.

Wall-mounting bracket

Bracket

Pole-mount clamps (2)

Weatherproof

Access point cable glands (3)

Grounding

screws (2) screws (4)

Figure 1. Package contents

Hardware Setup

Outdoor High Power Wireless N Access Point

Front Panel

Ports, LEDs, and the Reset button are located on the front panel.

LEDs

Reset button

Figure 2. Front panel

Pressing the Reset button restores the factory settings. See Factory Settings on page 62.

LEDs

The LEDs light to indicate wireless access point activity.

Table 1. LEDs

LED Description

Power • Off. Power is off.

• Solid green. Power is on.

• Amber, then blinking green. A self-test is running or software is being

loaded. During startup, the LED is first steady amber, then goes off, and

then blinks green before turning steady green after about 45 seconds. If

after one minute the LED remains amber or continues to blink green, it

indicates a system fault.

Activity • Off. No network traffic is detected on the access point.

• Blinking green. Network traffic is detected on the access point.

2.4G WLAN • Off. The wireless interface is off.

• Solid green. The wireless interface is on.

• Blinking green. Wireless activity is detected on the 2.4G band.

5G WLAN • Off. The wireless interface is off.

• Solid green. The wireless interface is on.

• Blinking green. Wireless activity is detected on the 5G band.

Heater • Off. The heater is off.

• Solid green. The heater is on.

LAN ports • Off. No link is detected.

• Solid green. A link is detected.

• Solid amber. A 10/100/1000 Mbps speed connection is detected.

• Blinking amber. A 10/100/1000 Mpbs speed connection is detected.

Hardware Setup

Outdoor High Power Wireless N Access Point

Product Label

The product label is located on the rear panel. It includes the default access information and

the serial number and MAC address.

Figure 3. Product label

Cable the Access Point for Initial Setup

Before mounting the access point in a high location, first set up and test the unit to verify

wireless network connectivity.

Note: DHCP client is enabled by default in the access point. If your network

includes a DHCP server, the access point obtains an IP address from

the DHCP server. If a DHCP server is not detected in your network

after 30 seconds, the access point sets its IP address to a static IP

address of 192.168.0.100.

To cable your access point:

1. Using an Ethernet cable, connect power-sourcing equipment (PSE) to a PoE port on the

access point.

Note: You must supply either IEEE802.3at power to at least one LAN port or

IEEE802.3af power to two LAN ports to power the access point. You

mustsupplyIEEE802.3atpowerto both LANportsto receivePoEpower

out.

Hardware Setup

Outdoor High Power Wireless N Access Point

2. If a DHCP server is not connected to your network, configure a computer with a static IP

address of 192.168.0.210 and a subnet mask of 255.255.255.0.

3. Connect an Ethernet cable from a LAN port on the access point to a LAN port on the

computer.

4. Check the LEDs to verify that the access point is set up correctly.

2. Initial Setup

This chapter covers the following topics:

•Connect to the Access Point and Log In

•Specify the Access Point Name and Location

•Set the Time

•Configure the Basic IP Settings

•Configure the Access Point as a DHCP Server for Wireless Clients

•Configure the Basic Wireless Settings

•Turn On the Wireless Signal and Test Connectivity

•Plan Your Network Security

•Set Up Security Profiles

•Deploy the Access Point

•Connect Optional External Antennas

Andere Handbücher für WND930

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR HE102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE WN203-200PES Bedienungsanleitung

NETGEAR

NETGEAR WAC124 Bedienungsanleitung

NETGEAR

NETGEAR PowerLEAP WiFi 1000 Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Montage- und Wartungsanleitung

NETGEAR

NETGEAR WAC120 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAG302 Bedienungsanleitung

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Kurzanleitung

NETGEAR

NETGEAR EX7000 Bedienungsanleitung

NETGEAR

NETGEAR AirBridge WBC502 Bedienungsanleitung

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Premium WNDAP620 Bedienungsanleitung

NETGEAR

NETGEAR WNHDE111 Bedienungsanleitung

NETGEAR

NETGEAR Insight WAC540 Bedienungsanleitung

NETGEAR

NETGEAR WAG302v1 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung