NETGEAR Powerline 500 XWN5001 Bedienungsanleitung

Powerline 500 WiFi Access Point

XWN5001 Installation Guide

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your

product and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone

support. NETGEAR recommends registering your product through the

NETGEAR web site.

Phone (US only): 1-888-NETGEAR

Phone (Other Countries):

See http://support.netgear.com/app/answers/detail/a_id/984.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks

and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the

United States and/or other countries. Information is subject to change without

notice. Other brand and product names are registered trademarks or

Statement of Conditions

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to make changes to the products

described in this document without notice. NETGEAR does not assume any

liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Contents

Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LED Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Button Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install the Adapters and Surf the Web with WiFi . . . . . . . . . . . . 6

Compatible NETGEAR Powerline Devices . . . . . . . . . . . . . . . 13

Package Contents

Ethernet cable

XWN5001

The proper use of power

strips with these Powerline

devices is shown here.

NEVER plug a Powerline

device directly into a

power strip.

Hardware Features

Factory

Reset Security

button

Ethernet

port

LEDs

On/Off

button

LED Descriptions

The LEDs indicate the status of your Powerline adapters.

• When you plug in the adapter, the Power LED lights up and

turns green. The XWN5001 can take up to 30 seconds to come

up.

• The adapter is not active when no Ethernet link has occurred for

more than 10 minutes. The XWN5001 adapter enters power

saving mode and the Power LED turns amber. By default,

the power saving mode function is disabled.

• The Ethernet LED lights up when you connect a powered-on

Ethernet device to at least one Ethernet port.

• The Powerline LED turns on when the adapter detects at least

one other compatible Powerline device.

The Pick A Plug feature lets you pick the electrical outlet with the

strongest link rate, indicated by the Powerline LED color:

- Green: Link rate > 80 Mbps (Best)

- Amber: Link rate > 50 and < 80 Mbps (Better)

- Red: Link rate < 50 Mbps (Good)

Button Descriptions

The buttons on your Powerline adapters let you do the following:

• Factory Reset button. Press the Factory Reset button for 2

seconds to return your Powerline device to its default factory

settings.

• Device On/Off switch.The wireless access point On/Off switch

turns the XWN5001 on and off.

• Security button. The Security button has a double function—it

secures the Powerline network and also provides an easy way

(WPS) for your wireless client to join the WiFi network access

point.

To secure the Powerline Network:

Once the Powerline adapters are active, you can use the Security

button to add encryption to your Powerline network. Note that

security is not set for Powerline adapter by default. NETGEAR

recommends that you secure your Powerline network to protect

your personal information and media from unwanted access.

To join a secure wireless access point using WPS:

WPS (Wi-Fi Protected Setup) lets your wireless client (such as a

laptop) easily join the WiFi network of the XWN5001 access

point, so you do not need to type the network name (SSID) and

password.

Install the Adapters and Surf the Web with WiFi

1. Set up security for the adapters.

Step 1.

Plug in the two

Powerline adapters.

Step 2.

On each adapter,

press the Security

button for > 2 but < 5

seconds, and then

release. The Power

LED starts blinking.

The Power LED

stops blinking. The

Powerline LED turns

on, and security

pairing is done.

2. Install the adapters. Plug the Powerline 500 adapter into a wall

outlet near your router/gateway and connect it to the LAN port using

an Ethernet cable.

If you want to share Internet access across your home, make

sure to connect the Powerline adapter to your Internet gateway.

3. Connect the Powerline WiFi access point. Plug the XWN5001

into a wall outlet where you need WiFi coverage. (Note that you can

also connect an Ethernet-based device, such as a game console,

set-top box or Blu-ray player, to the Internet and home network

using the additional Ethernet port on the XWN5001.)

4. Secure your WiFi access point. There are two methods to secure

your WiFi network for an XWN5001 access point.

Method A:

a. Download and install the Powerline Utility on your

computer.

b. Temporarily connect your computer to the Ethernet port

on the XWN5001.

This room

has an

XWN5001

WiFi

Access

Point.

Inhaltsverzeichnis

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX204 Bedienungsanleitung

NETGEAR

NETGEAR WAX630E Bedienungsanleitung

NETGEAR

NETGEAR WN802T Bedienungsanleitung

NETGEAR

NETGEAR WN203 Bedienungsanleitung

NETGEAR

NETGEAR WNAP210 Bedienungsanleitung

NETGEAR

NETGEAR WAC505 Bedienungsanleitung

NETGEAR

NETGEAR WN203 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WAGL102 Bedienungsanleitung

NETGEAR

NETGEAR WAX615 Bedienungsanleitung

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAX202 Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WAX630E Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Betriebsanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

NETGEAR

NETGEAR ME102 - Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung