4. Move the Sensor temporarily, right next door to the Router or Extender that you are pairing to. Carefully unscrew and open the baery
cover. Insert three new, good quality Alkaline AA baeries, ensuring correct polarity. The Sensor will now automacally enter “Pairing
Mode”. You have 30 seconds to start the Pairing Process.
5. Go back to the App on the “ADD DEVICE/WIFI SETTING” page. You will see the same SSID of the Router/Extender that you selected in
your phone’s WIFI Sengs at the top of the Page. Enter the password of that Router or Extender and press PAIR NEW DEVICE.
6. The Sensor will now start pairing to the Router or Extender and you will see the wheel whirling. It can take up to 60 seconds for a “pairing
successful” message to appear. If you see the message “me out, try again”, disconnect the baeries from the sensor, reconnect them
to enter pairing mode again and repeat the process. If this error message connues, double check that the SSID on this page and the
password both match the Router or Extender to which you are aempng to pair the Sensor to. Once pairing is successful, you can now
close the baery door.
4 5
enter the name of WIFI and password Pairing
6
insert three AA batteries
How to use
1. Exit the PAIRING Page in the APP by clicking at the top of the screen (iOS only, for Android users press Backwards on your Smartphone).
Then, click at the top of the APP’s SETTING PAGE to return you to the APP’s Home Screen. Now press SECURITY SENSOR TAG. This
will take you to the Alert Mode Screen. This allows you to choose the Sound you will hear on your phone when an Alarm nocaon is
received from both the PIR Sensor and all other Nexus devices you may have paired to your Router.
Alert Mode = Siren Sound (5 seconds repeated twice) + incoming Nocaon
Chime Mode = Short Alert Tone + incoming Nocaon
Silent Mode = No Siren, no Alert Sound, just the Nocaon
O Mode = No Siren, no Alert Sound and no Nocaon (All alerts from the Sensor will sll be listed the DEVICE’s HISTORY page)
2. Click at the boom of the screen. This will take you to the DEVICE page. Here you will see all the Sensors, including any other type of
Nexus sensors that have been paired to the APP.
Once there’s unexpected movement in your home. You will see the blue LED ash once followed, a few seconds later by a further two
quick ashes, to indicate a nocaon Alert has been sent to the APP. Depending on the Alert Mode you have chosen, this will be audible
or silent. You will see the nocaon appear NexusHome now
PIR SNESOR : Alert and the Device will start to ash with the Alert’s me and date stamped
alongside. Press the “Refresh” Buon at the top le hand side of the page to cancel the ashing. If you now press the Device Icon, you
will be taken to its HISTORY PAGE which will list the last 30 nocaons. On this page you can also:
i) Toggle between turning a local Alarm On or o (On means that when the sensor is triggered, the oponal Nexus WIFI socket
will also start beeping)
ii) Press to set the Baery Save me to 15 minutes, 45 minutes, or 0 minute.
‘’Baery Save Time” means that, aer detecng inmal movement, the Sensor will ignore any subsequent movement for the Time
Period selected, thereby dramacally conserving baery life. If the Sensor is mounted in a locaon where it is likely to see high trac
(ie regular movement), it is therefore important that you select either 15 or 45 minutes. Otherwise, not only will the Sensor’s baeries
run down quickly, but you will receive constant nocaons.
iii) Swipe the “History Secon” to the Le to get to the “Device Disabled Sengs”. Here you can select up to 4 daily periods in which the
Sensor is automacally switched to O Mode.
a/ Tap on One of the 4 periods to take you to the Time Selecon Screen.
b/ Select the Time Period at the top of the Screen you want the Sensor to turn O automacally and then select the Days of the Week.
Press to return to the Time Selecon Screen.
c/ The Periods you selected will now be shown on the Screen. Click on to manually turn a Time Period O.
12
4 different modes device list and history
iii)
b/ select time period
c/ turn a time
period off
a/ Top on one of
the 4 periods
Device Disabled Settings Device Disabled Settings
i)
ii)
PANIC BUTTON
PIR SENSOR
DOOR SENSOR
2
