Newgy Versa-Net Kurzanleitung zur Einrichtung

Attach the Front

Support/Center

Frame assembly to

one end of the table.

Connect Front Support

Plate (#7) to Robot

Center Frame (#6); one

side of the pivot tube

in the Front Support Plate will

mount to the pivot pin on the

front of the Robot Center

Frame and an Allen Bolt will

secure the other side.

ASSEMBLY/USE INSTRUCTIONS

VERIFY ALL PARTS

Cover your table tennis table top with either

a towel or other soft cloth for protection.

Unpack all the parts from the box and lay

them out so you can identify them. Become familiar

with each part as shown in this diagram. If uncertain

of the identity of a part, look for a small silver tag

with the name of that part.

1. Collection Trays (1 Left/1 Right)

2. Curved Net Support Tube, Long (1 piece)

3. Curved Net Support Tube, Short (2 pieces)

4. Hardware Packet (3 Allen Head Bolts, Allen Head

Wrench, 1-Winged Head Thumb Screw)

5. Main Net (1 Piece)

6. Center Frame and Net Bag (1 Piece)

7. Front Support Mechanism (1 Set)

8. Side Net Clip in Small Plastic Bag (2 pieces)

The Newgy Versa-Net is a multi-function net system

to enhance your playing experience. Use it with

your Robo-Pong 540(+)/1040(+)/1050(+)/1055

to recycle balls, as well as work as a catch and

collection net for multi-ball and serve practice.

With the Versa-Net, now you can play and practice

longer; reduce the need to stop and pick up balls as

often!

ASSEMBLY STEPS

Please read each step in its entirety. Then perform

each step point by point. Pay close attention to the

directions, especially the italicized words. Refer often

to the diagrams of Step 1 for part identification.

Connect the

Collection Trays (#1)

to the Center Frame

assembly; place the

smooth edge toward the

table and insert the frame

onto the pivot pin at the front

of the Center Frame

assembly and use an Allen Head Bolt to secure the

other side.

Repeat the above steps for the other tray.

ERSA

ERSAERSA

ETET

EWGY

™

Insert the Long, Curved

Net Support Tube into

the slot at the rear of

the Center Frame

assembly and use the Winged

Head Thumb Screw to secure

the Tube.

Use the Velcro

straps to secure the

Main Net to Center

Frame and

Collection Trays.

Unfold the Main

Net (#5) and

starting with the

center, insert the

Curved Support Tubes

into the pockets sewn

into the Main Net – You

may need to lift the

Collection Trays slightly to

align the pockets to the Support Tubes.

Insert a Curved Net

Support Tube into

each of the

Collection Trays.

Extend the red elastic bands under the

table net and attach to your table net

bracket tightening knob. If your table

mounts the net outside the edge of the

table, attach a Side Net Clip (#8) at 15 cm from the

table net, with the open end closest to the net.

On each side of mount for

the center/Long Support

Tube, there are square slots

to store the Short Support

Tubes and once folded into

an upright position the

Collection Trays have Velcro

to allow them to stay folded in position.

If you want to utilize the ball recycling feature of

the Versa-Net, you need to remove the Ball Bucket

Extender before placing your Robo-Pong

1040(+)/1050(+)/1055 into the Versa-Net system.

STORAGE

BALL MANAGEMENT

Newgy Industries, Inc.

Tennessee, USA

800-556-3949 • 615-452-6470

newgy@newgy.com

www.newgy.com

A B

You can also use your new Versa-Net by placing

your robot on top of the table in front of the net

and practicing against the robot. When the robot

stops throwing balls, shut off your robot, go to the

back of the net, and pick up the collection bucket*.

Refill your robot with balls from the bucket and

you’re ready to go again!

*If you're using your Robo-Pong on top of the table, place a bucket

(not included) under the collection net.

If you want to be able

to manage the number

of balls played per

session, keep the Ball

Bucket Extender on

your Robo-Pong

1040(+)/1050(+)/1055

when placing it into the

Versa-Net system.

YOU’RE DONE!

6.13.18

Andere Newgy Zubehör Handbücher

Newgy

Newgy Robo-Caddy Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung