Nibe SMO 20 Bedienungsanleitung
User manual
LEK
NIBE™ SMO 20
Control module
UHB GB 1322-1
231763
4XLFN JXLGH
1DYLJDWLRQ
2N EXWWRQ FRQILUPVHOHFW
%DFN EXWWRQ EDFNXQGRH[LW
&RQWURO NQRE PRYHLQFUHDVHUHGXFH
A detailed explanation of the button functions can be found on page
8.
How to scroll through menus and make different settings is described
on page 12.
6HW WKH LQGRRU FOLPDWH
;
,1'225 &/,0$7(
0< 6<67(0
,1)2
+27 :$7(5
WHPSHUDWXUH
The mode for setting the indoor temperature is reached, when in the
start mode in the main menu, by pressing the OK button twice. Read
more about the settings on page 19.
,QFUHDVH KRW ZDWHU YROXPH
;
; ,1'225 &/,0$7(
0< 6<67(0
,1)2
+27 :$7(5 RII
WHPSRUDU\ OX[
KUV
KUV
KUV
To temporarily increase the amount of hot water (if a hot water heater
is installed to your SMO 20), first turn the control knob to mark menu
2 (water droplet) and then press the OK button twice. Read more about
the settings on page 31.
In event of disturbances in comfort
If a disturbance in comfort of any type occurs there are some measures
that can be taken before you need to contact your installer. See page
52 for instructions.
Table of Contents
1 Important information 2
Installation data 2
Safety information 3
Serial number 4
Country specific information 4
SMO 20 – An excellent choice 7
2 The control module – the heart of the house 8
Control module's function 8
Contact with SMO 20 8
Maintenance of SMO 20 16
3 SMO 20 – at your service 19
Set the indoor climate 19
Set the hot water capacity 31
Get information 35
Adjust the heat pump 39
4 Disturbances in comfort 51
Manage alarm 51
Troubleshooting 52
Additional heating only 54
5 Technical data 56
6 Glossary 57
Item register 61
1NIBE™ SMO 20Table of Contents |
1Important information
Installation data
SMO 20Product
Serial number
Installation date
Installer
Type of docking
Accumulator/hot water heater
Heat pump/output size
Add. heat type/power
SetDe-
fault
set-
tings
NameNo.
0/9heating curve (offset/curve slope)1.9.1
Serial number must always be given
Certification that the installation is carried out according to instructions
in NIBE's installer manual and applicable regulations.
_________________________Signed__________________Date
NIBE™ SMO 20Chapter 1 | Important information2
Safety information
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
Rights to make any design or technical modifications
are reserved.
©NIBE 2013.
Symbols
NOTE
This symbol indicates danger to machine or person.
Caution
This symbol indicates important information about what you should ob-
serve when maintaining your installation.
TIP
This symbol indicates tips on how to facilitate using the product.
Marking
SMO 20 is CE marked and fulfils IP21.
The CE marking means that NIBE ensures that the product meets all regu-
lations that are placed on it based on relevant EU directives. The CE mark
is obligatory for most products sold in the EU, regardless where they are
made.
IP21 means that the product can be touched by hand, that objects with a
diameter larger than or equivalent to 12.5 mm cannot penetrate and cause
damage and that the product is protected against vertically falling drops.
3NIBE™ SMO 20Chapter 1 | Important information
Serial number
The serial number can be found on the upper side of the cover on the
control module.
LEK
6HULDO QXPEHU
Caution
Always give the product's serial number when reporting a fault.
Country specific information
Great Britain
This installation is subject to building regulation approval, notify the local
Authority of intention to install.
Use only manufacturer’s recommended replacement parts.
Nibe is a licensed member of the Benchmark Scheme which aims to im-
prove the standards of installation and commissioning of domestic heating
NIBE™ SMO 20Chapter 1 | Important information4
and hot water systems in the UK and to encourage regular servicing to
optimise safety, efficiency and performance.
Benchmark is managed and promoted by the Heating and Hotwater In-
dustry Council. For more information visit www.centralheating.co.uk
Warranty and insurance information
Thank you for installing a new NIBE heat pump in your home.
NIBE heat pumps are manufactured in Sweden to the very highest standard
so we are pleased to offer our customers a comprehensive guarantee.
The product is guaranteed for 24 months for parts and labour from the
date of installation or 33 months from the date of manufacture, whichever
is the shorter.
The NIBE guarantee is based on the unit being installed and commissioned
by a NIBE accredited installer, serviced every year and the Benchmark
documents completed. Where this condition is not met, any chargeable
spare parts or components issued within the applicable guarantee period
still benefit from a 12 month warranty from the date of issue by the
manufacturer.
We recommend the installer completes and returns as soon as possible,
your guarantee registration card or completes the guarantee form on the
NIBE website www.nibe.co.uk.
Please ensure that the installer has fully completed the Benchmark
Checklist in the end of the Installation Instructions supplied with the
product and that you have signed to say that you have received a full and
clear explanation of its operation. The installer is legally required to com-
plete a commissioning checklist as a means of complying with the appro-
priate Building Regulations (England and Wales).
All installations must be notified to Local Area Building Control either
directly or through a Competent Persons Scheme. A Building Regulations
Compliance Certificate will then be issued to the customer who should,
on receipt, write the Notification Number on the Benchmark Checklist.
This product should be serviced regularly to optimise its safety, efficiency
and performance. The service engineer should complete the relevant
Service Record on the Benchmark Checklist after each service.
The Benchmark Checklist may be required in the event of any warranty
work and as supporting documentation relating to home improvements
in the optional documents section of the Home Information Pack.
5NIBE™ SMO 20Chapter 1 | Important information
NIBE™ SMO 20Chapter 1 | Important information6
SMO 20 – An excellent choice
SMO 20 is an electric control module, which has been introduced to supply
your home with inexpensive and environmentally friendly heating. Heat
production is reliable and economical with a NIBE air/water heat pump
and accumulator/water heater.
An additional heater (for example electric/oil/gas boiler) can engage
automatically if something unexpected should occur or as reserve opera-
tion.
Excellent properties for SMO 20:
႑Easy to read display
The control module has an easy to read display with easy-to-understand
menus that facilitate setting a comfortable indoor climate.
႑Easy to install
SMO 20 is easy to install together with a compatible NIBE air/water
heat pump. When installing together with these, the control module
is connected to the heat pump, which enables you to see any heat
pump alarms in SMO 20. The size of the control module means that it
can be installed on walls indoors for easy access to control your install-
ation.
7NIBE™ SMO 20Chapter 1 | Important information
2The control module – the
heart of the house
Control module's function
SMO 20 is a simple electrical control module, which, together with NIBE
air/water heat pump, accumulator/water heater and additional heater
(e.g. electric/gas boiler), creates a complete installation. Among other
things, it controls the heat pump, circulation pumps, reversing valves and
additional heat to supply your home with inexpensive and environmentally
friendly heating in the most efficient way.
Contact with SMO 20
Display unit
$
%
&
'
(
)
'LVSOD\
6WDWXV ODPS
2. EXWWRQ
%DFN EXWWRQ
&RQWURO NQRE
6ZLWFK
,1'225 &/,0$7(
0< 6<67(0
,1)2
+27 :$7(5
602
There is a display unit on the front of the control module, which is used
to communicate with SMO 20. Here you:
႑switch on, switch off or set the installation to emergency mode.
႑set the indoor climate and hot water as well as adjust the installation
to your needs.
NIBE™ SMO 20Chapter 2 | The control module – the heart of the house8
Andere Handbücher für SMO 20
9
Inhaltsverzeichnis
Andere Nibe Steuereinheit Handbücher
Nibe
Nibe EBV 200 Bedienungsanleitung
Nibe
Nibe SMO S40 Bedienungsanleitung
Nibe
Nibe OPT 10 Benutzerhandbuch
Nibe
Nibe VVM 310 EMK Benutzerhandbuch
Nibe
Nibe VVM 320 Bedienungsanleitung
Nibe
Nibe PKM 10 Bedienungsanleitung
Nibe
Nibe SCU 10 Bedienungsanleitung
Nibe
Nibe SMS 40 Benutzerhandbuch
Nibe
Nibe RMU S40 Benutzerhandbuch
Nibe
Nibe BIAWAR ME 0015 Bedienungsanleitung
Nibe
Nibe PCS 44 Benutzerhandbuch
Nibe
Nibe POOL 500 Benutzerhandbuch
Nibe
Nibe SMO 20 Bedienungsanleitung
Nibe
Nibe CMO 11 Original Betriebsanleitung
Nibe
Nibe PCM S40 Benutzerhandbuch
Nibe
Nibe SMS 40 Benutzerhandbuch
Nibe
Nibe DEH 500 Benutzerhandbuch
Nibe
Nibe VVM 225 UK 1x230V Bedienungsanleitung
Nibe
Nibe SAM 42 Benutzerhandbuch
Nibe
Nibe MODBUS 40 Benutzerhandbuch
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
