Nibe SAM 41 Benutzerhandbuch
Installer manual
LEK
SAM 41
Supply air module
IHB GB 1635-2
331778
Table of Contents
41 Important information
4Safety information
72 Delivery and handling
7Transport
7Assembly
7Supplied components
7Removing the covers
8
3 The design of the supply air mod-
ule
104 Pipe and ventilation connections
10General pipe connections
10Symbol key
10Outline diagram
11Dimensions and pipe connections
11Mounting
12Heating medium side
14General ventilation connection
14Ventilation flow
14Adjusting ventilation
155 Electrical connections
15General
15Connections
166 Commissioning and adjusting
16Preparations
16Connecting to heating medium system
16Start-up and inspection
177 Program settings
17Start guide
17Menu system
188 Disturbances in comfort
18Info menu
18Manage alarm
18Troubleshooting
209 Accessories
2110 Technical data
21Dimensions and setting-out coordinates
22Technical specifications
23Energy labelling
24Electrical circuit diagram
25Index
3Table of Contents |SAM 41
Safety information
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and under-
stand the hazards involved. Children shall
not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
Rights to make any design or technical
modifications are reserved.
©NIBE 2016.
Symbols
NOTE
This symbol indicates danger to machine or
person.
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
Marking
SAM 41 is CE marked and fulfils IP21.
The CE marking means that NIBE ensures that the
product meets all regulations that are placed on it based
on relevant EU directives. The CE mark is obligatory for
most products sold in the EU, regardless where they are
made.
IP21 means that objects with a diameter larger than or
equivalent to 12.5 mm cannot penetrate and cause
damage and that the product is protected against vertic-
ally falling drops of water.
Software version
The heat pump must have software version 2653 or later.
Visit www.nibeuplink.com and click on the tab "Soft-
ware" to download the latest software to your installa-
tion or use the enclosed USB memory.
Serial number
The serial number can be found at the bottom left inside
the front cover.
LEK
Serial number
Caution
You need the product's 14 digit serial number
for servicing and support.
Recovery
Leave the disposal of the packaging to the in-
staller who installed the product or to special
waste stations.
When disposing of the product, the constituent
materials and components, such as compressors,
fans, circulation pumps and circuit boards, must be dis-
posed of at a special waste station or at a dealer who
provides this type of service.
To access the separate components, refer to the section
that shows the construction of the product. No special
tools are required for access.
Improper disposal of the product by the user results in
administrative penalties in accordance with current legis-
lation.
Country specific information
Installer manual
This installer manual must be left with the customer.
SAM 41Chapter 1 | Important information4
1 Important information
Inspection of the installation
In addition, fill in the page for the installation data in the User Manual.
Current regulations require the supply air module to be inspected before it is put into service. The inspection must
be carried out by a suitably qualified person.
DateSignatureNotesDescription
✔
Ventilation (page 14)
Setting ventilation flow exhaust air
Setting ventilation flow supply air
Heating medium (page 12)
System flushed
Accessories bled
Check against output and pressure drop
diagrams
Connected according to outline diagram
Electricity (page 15)
Supply connected 230 V
Connected communication
5Chapter 1 | Important informationSAM 41
Contact information
KNV Energietechnik GmbH, Gahberggasse 11, 4861 SchörflingAT
Tel: +43 (0)7662 8963-0 Fax: +43 (0)7662 8963-44 E-mail: mail@knv.at www.knv.at
NIBE Wärmetechnik c/o ait Schweiz AG, Industriepark, CH-6246 AltishofenCH
Druzstevni zavody Drazice s.r.o, Drazice 69, CZ - 294 71 Benatky nad JizerouCZ
NIBE Systemtechnik GmbH, Am Reiherpfahl 3, 29223 CelleDE
Vølund Varmeteknik A/S, Member of the Nibe Group, Brogårdsvej 7, 6920 VidebækDK
NIBE Energy Systems OY, Juurakkotie 3, 01510 VantaaFI
NIBE Energy Systems France Sarl, Zone industrielle RD 28, Rue du Pou du Ciel, 01600 ReyrieuxFR
NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way, Chesterfield S41 9QGGB
NIBE Energietechniek B.V., Postbus 634, NL 4900 AP OosterhoutNL
ABK AS, Brobekkveien 80, 0582 Oslo, Postadresse: Postboks 64 Vollebekk, 0516 OsloNO
NIBE-BIAWAR Sp. z o. o. Aleja Jana Pawła II 57, 15-703 BIAŁYSTOKPL
Tel: 085 662 84 90 Fax: 085 662 84 14 E-mail: sekretariat@biawar.com.pl www.biawar.com.pl
© "EVAN" 17, per. Boynovskiy, Nizhny NovgorodRU
NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 MarkarydSE
For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information.
SAM 41Chapter 1 | Important information6
Transport
The supply air module must be transported and stored
dry.
Assembly
SAM 41 is mounted free-standing on brackets Noise
from the fan can be transferred to the brackets.
■Install the brackets to an outside wall, ideally in a room
where noise does not matter, in order to eliminate
noise problems. If this is not possible, avoid placing it
against a wall behind a bedroom or other room where
noise may be a problem.
■Wherever the unit is located, walls to sound sensitive
rooms should be fitted with sound insulation.
■Route pipes so they are not fixed to an internal wall
that backs on to a bedroom or living room.
Installation area
Leave a free space of 800 mm in front of the supply air
module. All service on SAM 41 can be carried out from
the front.
800
NOTE
Ensure that there is sufficient space (300 mm)
above the supply air module for installing vent-
ilation hoses.
Supplied components
USB memory
1 x
Support bushes
2 x
LEK
Vent hose
1 x
Removing the covers
Front cover
1. Remove the service cover by pulling it straight out.
LEK
7Chapter 2 | Delivery and handlingSAM 41
2 Delivery and handling
LEK
LEK
S3 AA5-S2 AA5
AA5
AA5-S2
LEK
XL34XL33QM20
PF 1 AA100
LEK
SF1
W102 W101
LEK
GQ3 EP13
QN40
BT23
XL36XL37 BT69 BT68BT22
HQ11
SAM 41Chapter 3 | The design of the supply air module8
3 The design of the supply air module
Pipe connections
Ventilation connection supply airXL33
Ventilation connection outdoor airXL34
Connection, heating medium inXL36
Connection, heating medium out 1
XL37
HVAC components
Supply air batteryEP13
Venting heating mediumQM20
Control valve heating mediumQN40
Sensors etc.
Temperature sensor, supply air1
BT22
Temperature sensor, outdoor airBT23
Temperature sensor, flow1
BT68
Temperature sensor, return1
BT69
Electrical components
Accessory cardAA5
Dip switchAA5-S2
Joint cardAA100
Switch, position 0 - 1, main switchSF1
Cord with connection plugW101
Communication cableW102
Ventilation
Supply air fanGQ3
Air filter supply airHQ11
Miscellaneous
Rating platePF1
1Not visible in the image
Designations in component locations according to
standard IEC 81346-1 and 81346-2.
9Chapter 3 | The design of the supply air moduleSAM 41
General pipe connections
Pipe installation must be carried out in accordance with
current norms and directives.
Symbol key
MeaningSymbol
Shut-off valve
Non-return valve
Level vessel
Control valve
Shunt / shuttle valve
Safety valve
Temperature sensor
Expansion vessel
Circulation pump
Fan
Compressor
Heat exchanger
Radiator system
Domestic hot water
Outline diagram
NOTE
External frost protection must be installed in the
outdoor air duct.
-EB100 -AZ2
-CP1
-EB100
-CP1
-AZ2
NOTE
If several climate systems (ECS 40/ECS 41) are
present, SAM 41 must be connected in parallel
with climate system 1. A circulation pump must
be used to ensure the flow over SAM 41.
SAM 41Chapter 4 | Pipe and ventilation connections10
4 Pipe and ventilation connections
Andere Handbücher für SAM 41
1
Inhaltsverzeichnis
Andere Nibe Steuereinheit Handbücher
Nibe
Nibe SAM 42 Benutzerhandbuch
Nibe
Nibe VVM S320 Benutzerhandbuch
Nibe
Nibe VCC 28 Bedienungsanleitung
Nibe
Nibe VVM 320 Benutzerhandbuch
Nibe
Nibe MODBUS 40 Benutzerhandbuch
Nibe
Nibe VST 20 Benutzerhandbuch
Nibe
Nibe SMO 40 Benutzerhandbuch
Nibe
Nibe SMO 20 Benutzerhandbuch
Nibe
Nibe PKM 10 Bedienungsanleitung
Nibe
Nibe CMR26 Benutzerhandbuch
Nibe
Nibe MODBUS 40 Benutzerhandbuch
Nibe
Nibe SMO 20 Bedienungsanleitung
Nibe
Nibe VVM 225 UK 1x230V Bedienungsanleitung
Nibe
Nibe VVM 320 Bedienungsanleitung
Nibe
Nibe SMO 05 Benutzerhandbuch
Nibe
Nibe RCU 10 Bedienungsanleitung
Nibe
Nibe SMO 20 Bedienungsanleitung
Nibe
Nibe SMO 40 Benutzerhandbuch
Nibe
Nibe PKM 05 Bedienungsanleitung
Nibe
Nibe VVM 310 EMK Benutzerhandbuch
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
