Nibe VVM 310 EMK Benutzerhandbuch

IHB EN 1834-9

231175

INSTALLER MANUAL

Indoor module

NIBE VVM 310 EMK

Quick guide

Navigation

Ok button (confirm/select)

Back button (back/undo/exit)

Control knob (move/increase/reduce)

A detailed explanation of the button functions can be found on page 47.

How to scroll through menus and make different settings is described on page 48.

Set the indoor climate

MY INSTALLATION

INDOOR CLIMATE HOT WATER

INFO

The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start

mode in the main menu.

Increase hot water volume

1X INDOOR CLIMATE HOT WATER

MY INSTALLATION INFO

To temporarily increase the amount of hot water, first turn the control knob to mark menu 2 (water droplet)

and then press the OK button twice.

41 Important information

4Safety information

4Symbols

4Marking

5Serial number

5Recovery

6Inspection of the installation

7Outdoor modules

82 Delivery and handling

8Transport

8Assembly

9Supplied components

10Removing the covers

123 Indoor module's design

13List of components

144 Pipe connections

14General pipe connections

17Dimensions and pipe connections

18Installation alternative

275 Electrical connections

27General

30Connections

33Settings

35Optional connections

39Connecting accessories

416 Commissioning and adjusting

41Preparations

41Filling and venting

41Start-up and inspection

44Setting the cooling/heating curve

45Setting hot water circulation

45Pool

46SG Ready

477 Control - Introduction

47Display unit

48Menu system

518 Control - Menus

51Menu 1 - INDOOR CLIMATE

52Menu 2 - HOT WATER

52Menu 3 - INFO

53Menu 4 - MY SYSTEM

54Menu 5 - SERVICE

649 Service

64Service actions

6710 Disturbances in comfort

67Info-menu indoor module

67Troubleshooting

6911 Accessories

7112 Technical data

71Dimensions and setting-out coordinates

72Technical specifications

74Electrical wiring diagram, 3x400 V

79Item register

83Contact information

3Table of ContentsNIBE VVM 310

Table of Contents

Safety information

This manual describes installation and service proced-

ures for implementation by specialists.

The manual must be left with the customer.

This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given super-

vision or instruction concerning use of the

appliance in a safe way and understand

the hazards involved. Children shall not

play with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

Rights to make any design or technical

modifications are reserved.

©NIBE 2018.

MinMaxSystem pres-

sure

0.05 MPa

(0.5 bar)

0.3 MPa

(3 bar)

Heating medium

0.01 MPa

(0.1 bar)

1.0 MPa

(10 bar)

Domestic water

Water may drip from the safety valve's

overflow pipe, so this pipe must be inclined

along its entire length to prevent water

pockets. It must also be frost-proof. The

overflow pipe must be visible and its outlet

must be open.

VVM 310 must be installed with a disconnec-

tion option on the supply cable. Minimum

cable area must be sized according to the

fuse rating used. All installations must be

carried out in accordance with current norms

and directives.

Symbols

NOTE

This symbol indicates danger to person or ma-

chine .

Caution

This symbol indicates important information

about what you should consider when installing

or servicing the installation.

TIP

This symbol indicates tips on how to facilitate

using the product.

Marking

The CE mark is obligatory for most products sold in

the EU, regardless of where they are made.

Classification of enclosure of electro-technical equip-

ment.

IP21

Danger to person or machine.

Read the User Manual.

NIBE VVM 310Chapter 1 | Important information4

1 Important information

Serial number

You can find the serial number in the middle of the top

panel, on the bottom right of the front cover, as well as

in menu 3.1.

Serial number

Caution

You need the product's (14 digit) serial number

for servicing and support.

Recovery

Leave the disposal of the packaging to the in-

staller who installed the product or to special

waste stations.

Do not dispose of used products with normal

household waste. It must be disposed of at a

special waste station or dealer who provides this type

of service.

Improper disposal of the product by the user results in

administrative penalties in accordance with current le-

gislation.

5Chapter 1 | Important informationNIBE VVM 310

Inspection of the installation

Current regulations require the heating installation to be inspected before it is commissioned. The inspection must

be carried out by a suitably qualified person. Fill in the page for information about installation data in the User

manual.

DateSignatureNotesDescription

✔

Heating medium (page 20)

System flushed

System vented

Expansion vessel

Particle filter

Safety valve

Shut off valves

Boiler pressure

Connected according to outline diagram

Hot water (page 20)

Shut off valves

Mixing valve

Safety valve

Electricity (page 27)

Connected communication

Circuit fuses

Fuses, indoor module

Fuses property

Outside sensor

Room sensor

Current sensor

Safety breaker

Earth circuit-breaker

Setting of emergency mode thermostat

Miscellaneous

Docked to

NIBE VVM 310Chapter 1 | Important information6

Outdoor modules

COMPATIBLE AIR/WATER HEAT PUMPS

NIBE SPLIT HBS 05

HBS 05-6

Part no. 067 578

AMS 10-6

Part no. 064 205

HBS 05-12

Part no. 067 480

AMS 10-8

Part no. 064 033

HBS 05-12

Part no. 067 480

AMS 10-12

Part no. 064 110

HBS 05-16

Part no. 067 536

AMS 10-16

Part no. 064 035

F2040

F2040-8

Part no. 064 109

F2040-6

Part no. 064 206

F2040-16

Part no. 064 108

F2040-12

Part no. 064 092

F2120

F2120-8 3x400V

Part no. 064 135

F2120-8 1x230V

Part no. 064 134

F2120-12 3x400V

Part no. 064 137

F2120-12 1x230V

Part no. 064 136

F2120-20 3x400V

Part no. 064 141

F2120-16 3x400V

Part no. 064 139

Check the software version of compatible older NIBE

air/water heat pumps, see page 18.

7Chapter 1 | Important informationNIBE VVM 310

Transport

VVM 310 should be transported and stored vertically in

a dry place. However, the VVM 310 may be carefully

laid on its back when being moved into a building.

Assembly

• Position VVM 310 on a firm base that can take the

weight. Use the product's adjustable feet to obtain a

horizontal and stable set-up.

30 - 50 mm

15 - 40 mm

20-55 mm

• As water can exit the safety valve* for hot water,

when connected to VVM 310, the space where

VVM 310 is located must be provided with a floor

drain.

*Not enclosed.

INSTALLATION AREA

Leave a free space of 800 mm in front of the product.

All service on VVM 310 can be carried out from the front.

800

NOTE

Leave 10 – 25 mm free space between the in-

door module and the wall behind for routing of

cables and pipes.

NIBE VVM 310Chapter 2 | Delivery and handling8

2 Delivery and handling

Supplied components

Room sensorOutside sensor

LEK

Current sensor

LOCATION

The kit of supplied items is placed on top of the product.

9Chapter 2 | Delivery and handlingNIBE VVM 310

Removing the covers

Front cover

LEK

1. Remove the screws from the lower edge of the

front panel.

2. Lift the panel out at the bottom edge and up.

Side covers

The side covers can be removed to facilitate the install-

ation.

Caution

50 mm space required to remove the side

panels.

1. Remove the screws from the upper and lower

edges.

2. Twist the cover slightly outward.

3. Move the hatch backwards and slightly to the side.

4. Pull the cover to one side.

5. Pull the hatch forwards.

NIBE VVM 310Chapter 2 | Delivery and handling10

Andere Handbücher für VVM 310 EMK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nibe Steuereinheit Handbücher

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung