Eldstadsbeklädnad
Diffusor
Rökhylla
Spjäll
Typskylt
Asklåda
Roster
Motvikt
Strålningsplåt
Justerbara fötter
Anslutningsstos
Bottenisolering
GB
84
Smoke shelf
Counter weight
Grate
Adjustable feet
Connector
Bottom insulation
Ash-pan
Type plate
Damper
Hearth cladding/Thermotte
Diffuser
FACTS
Floor plate
If the floor under the stove is flammable,
it must be protected by a non-flammable
material e.g. natural stone, concrete or 0.7
mm thick metal. The floor in front of the
hearth opening must be protected against
any falling embers using non-flammable
material that covers an area at least 300
mm in front and 100 mm along each side
of the hatch opening. A toughened glass
hearth plate is available as an accessory.
Application to local authority
Before installing a stove or erecting a
chimney, it is necessary for you to make
an application for permission to your
local authority. Ask your local authority
for advice regarding regulations and the
application.
General
This manual contains instructions about
how Contura i30 must be assembled
and installed. To ensure the function
and safety of the insert, we recommend
that installation is carried out by an
authorised technician. Our Contura dealers
can recommend suitable technicians,
information about our dealers can be found
at www.contura.eu
Instructions for lighting are also supplied
with the insert. Read them carefully and
keep them safe for future use.
Structural support
Check that floor joists have the sufficient
load capacity for the insert, chimney and
construction parts that are used when
recessing.
Technical
specifications
Model i30
Output 4-9 kW
Nominal output 6 kW
Efficiency 80%
Weight (kg) 135 (with Thermotte)
95 (without Thermotte)
Width (mm) 725
Depth (mm) 410
Height (mm) 1260
Connector diameter Ø150 mm ext.
Type approved in accordance with:
European standard EN-13229
DIN plus
Bauart 1
Part 15a B-VG
Test report no: RRF-29 13 3371
SINTEF: 110-0405
Approved for installation in Smoke Control Area
by DEFRA
Heat deflector
