Nilfisk-Advance Power Bedienungsanleitung

823 0089 000 b

Nilsk Power

User Manual

Betriebsanleitung

Instructions d’utilisation

Instrucciones de manejo

Instruções de operação

Istruzioni sull’uso

Gebruiksaanwijzing

Driftsinstruks

Driftsvejledning

Brugsvejledning

Käyttöohje

14 1513

English 1

Deutsch 9

Français 17

Español 25

Português 33

Italiano 41

Nederlands 49

Svenska 57

Norsk 65

Dansk 73

Suomi 81

Illustrations 89

www.nilﬁsk.com

Table of contents,

page reference

Overview A+1

Safety instructions 2

Instructions for use 3

Cleaning tips 6

Trouble shooting 7

Service and maintenance etc. 7

Guarantee and service 8

Line drawings 89,90

Speciﬁcations and details are subject

to change without prior notice.

Overview

(inside front cover, page A)

1 On/off button

2 Suction control

3 Dust bag indicator

4 Suction valve

5 Parking bracket

6 Cable rewinder

7 Open/close button, accessory lid

8 Preﬁlter

9 Dust bag

10 Open/close button, dust container

11 Rating plate

12 HEPA ﬁlter

13 Crevice nozzle

14 Upholstery nozzle

15 Brush nozzle

16 Hard ﬂoor nozzle (not standard

on all models)

17 Combination nozzle

18 Turbo nozzle (not standard on all

models)

19 Telescopic tube

Welcome!

Thank you for choosing a

Nilﬁsk vacuum cleaner.

B= caption

(drawings inside the back cover

page 89 and 90)

Safety instructions

• Do not use the machine without dust

bag and all filters properly fitted.

• This machine is not intended for

suction of hazardous materials or

gas, doing so may expose people to

serious health risks.

• The machine must not be used for

suction of water or other liquids.

• Do not pick up sharp objects such

as needles or pieces of glass.

• Do not pick up anything that

is burning or smoking such as

cigarettes, matches or hot ashes.

• Use and store this machine indoors

and in a dry environment, 0 °C to 50

°C.

• Do not use the machine outdoors or

on wet surfaces.

• Do not handle the machine with wet

hands.

• Turn off the machine before

unplugging.

• To unplug, grasp the plug, not by

pulling on the cord. Do not carry or

pull the machine by the cord.

• The machine must not be used if

the cord shows any sign of damage.

Regularly inspect the cord for

damage, in particular if it has been

crushed, shut in a door or run over.

• Do not use the machine if it appears

faulty. Have the machine inspected

by an authorized service center if

the machine has been dropped,

damaged, left outdoors or has been

exposed to water.

• No changes or modifications to the

mechanical or electrical safety

devices should be made.

• All repair must be carried out by an

authorized service center.

• Use only original dust bags, original

filters and original accessories from

your local dealer.

Use of unauthorized dust bags and

filters will void the warranty.

• Turn off the machine and unplug

before starting dust bag or filter

change, grasp the plug, not by

pulling on the cord.

• Do not use the machine as a toy.

Do not leave children with the

machine without supervision.

• This appliance is not intended for

use by young persons or infirm

persons without supervision

unless they have been adequately

supervised by a responsible person

to ensure that they can use the

appliance safely. Young children

should be supervised to ensure that

they do not play with the appliance.

• If the supply cord cord is damaged,

it must be replaced by the

manufacturer, its service agent or

similarly qualified persons in order to

avoid hazard.

• This appliance conforms with

Directives 2004/108/EC, 2006/95/

EC, 93/68/EC.

The symbol on the product

or on its packing indicates that

this product may not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling of

electrical and electronic equipment.

By ensuring this product is disposed

of correctly, you will help prevent

potential negative consequences for

the environment and human health,

which could otherwise be caused by

inappropriate waste handling of this

product. For more detailed information

about recycling of this product, please

contact your local city office, your

household waste disposal service or

the shop where you purchased the

product.

Instructions for use

Before using the machine make sure

that the voltage shown on the rating

plate corresponds with the mains

voltage.

The machine is supplied with dustbag,

preﬁlter and exhaust ﬁlter.

Start and stop

Start

Pull out the cord and plug the machine

into a wall socket. Start the vacuum

cleaner using the start/stop button on

top of the vacuum cleaner.

Stop

Turn off the machine using the start/

stop button. Unplug by grasping the

plug, not by pulling on the cord.

Connecting hose, tube and nozzles

1. Insert the hose connector into the

suction inlet and press until the

hose engages with a click.

2. Connect the bent tube to the tube

and turn it until they engage with a

click.

3. Connect the tube and nozzle and

twist until they engage with a click.

4. The tube is telescopic and can be

adjusted to your height.

Push the button in the middle

of the tube to release the length

adjustment lock. Adjust the tube to

desired length.

Disconnect hose, tube and nozzle

• Disengage the nozzle from the

tube by pressing the button.

• Disengage the hose from the

tube by pressing the button.

• Release the hose connection

from the suction inlet by pressing

the locking mechanism and

remove.

Change of dust bag and ﬁlters

The size and quality of the dust bag

and ﬁlters affect the efﬁciency of the

vacuum cleaner. Use of non-original

dust bags or non-original ﬁlters can

cause restricted air ﬂow which may

lead to machine overload. Use of

accessories other than Nilﬁsk original

dust bags and Nilﬁsk original ﬁlters will

void the guarantee.

Changing the dust bag

The ﬁll level idicator of

dust bag. When indicator

is completly red the dust

bag must be changed in

order to prevent motor

damage.

Always use original dust bags from

Nilﬁsk.

1. Release the hose connection from

the suction inlet by pressing the

locking mechanism and then

remove it.

2. Open the lid to the dust container

by lifting the opening button in front

of/under the suction inlet.

3. Grip the handle of the dust bag

holder and remove the

holder and the full dust bag

from the dust container.

4. Seal the dust bag by pulling the

cardboard ﬂap.

5. Remove the full dust bag from the

dust bag holder.

6. Insert the new dust bag by guiding

the cardboard into the slots of the

bag holder.

7. Insert the dust bag holder with new

dust bag into the dust bag

conainer. Check that the dust bag

is fully opened in the dust

container.

8. Close the lid of the dust container.

9. Insert the hose connection into the

suction inlet and press until the

hose engages with a click.

Changing the preﬁlter

The preﬁlter protects the motor by

absorbing micro-particles that arn’t

captured by the dust bag. Change the

preﬁlter with every fourth dust bag.

The preﬁlter is located behind the dust

bag. Always use original ﬁlters from

Nilﬁsk.

1. Release the hose connection from

the suction inlet by pressing the

locking mechanism and then

remove it.

2. Open the lid to the dust container

by lifting the opening button in front

of/under the suction inlet.

3. Grip the handle of the dust bag

holder and remove the

holder and the full dust bag

from the dust container.

4. Seal the dust bag by pulling the

cardboard ﬂap.

5. Take out the ﬁlter holder with

preﬁlter.

6. Open the ﬁlter holder.

7. Remowe the used preﬁlter.

8. Fit the new preﬁlter and close the

ﬁlter holder. Check that the preﬁlter

is correctly ﬁtted in the holder.

9. Place the ﬁlter holder in position

and press into place.

10.Insert the dust bag holder with new

dust bag into the dust bag

conainer. Check that the dust bag

is fully opened in the dust

container.

11.Close the lid of the dust container.

12.Insert the hose connection into the

suction inlet and press until the

hose engages with a click.

Changing the exhaust ﬁlter

The exhaust ﬁlter is on some variants

of HEPA type ( High Efﬁciency Particu-

late Air ﬁlter) model.The ﬁlter cleans

exhaust air from micro particles that

are not not captured by the vacuum

bag and preﬁlter. The HEPA ﬁlter or

the exhaust ﬁlter can not be brushed

or washed clean. Change the ﬁlter at

least once per year. Always use

original HEPA ﬁlters and exhaust

ﬁlters from Nilﬁsk.

1. Release the lid on the back of the

vacuum cleaner. This is done by

pressing the locking button

upwards. Remove the lid from the

machine.

2. Remove the used HEPA ﬁlter.

3. Insert the new HEPA ﬁlter.

Do not touch the surface of the

ﬁlter. Handle using the plastic

frame that surrounds the ﬁlter.

Check that the HEPA

ﬁlter is installed correctly.

4. Replace the lid on the machine.

This is done by inserting the ﬂaps

on the top of the lid in the cor-

responding notches on the

machine.

5. Then press the lower edge

of the lid so the lock closes the lid.

DAdjust the suction power

Suction power is controlled using the

sliding valve on the hose handle.

Suction power is maximal when the

sliding valve is closed and minimal

when open. Adjust the suction power

by moving the sliding valve in

appropriate position.

Suction power is also adjusted using

the slide control on top of the vacuum

cleaner. The symbol on the control

indicates the direction for maximum

and minimum suction power.

Cleaning tips

Adjust the suction power by means of

the slide control on top of the vacuum

cleaner or the sliding valve on the

hose handle.

Crevice nozzle

Use the crevice nozzle for narrow

spaces.

Upholstery nozzle

Use the upholstery nozzle for

upholstered furniture.

Brush nozzle

Use the brush nozzle for curtains and

window sills.

Hard ﬂoor nozzle

Use the nozzle for hard ﬂoors.

Combination nozzle

Adjust the combination nozzle

depending on type of ﬂoor.

Turbo nozzle

Use the turbo nozzle for efﬁcient

carpet cleaning.

The different models of these vacuum

cleaners can include different nozzles.

Thermal fuse

The vacuum cleaner is ﬁtted with a

thermal fuse, which prevents it from

overheating. If the thermal fuse blows,

the vacuum cleaner stops and must

cool down before it can be started

again.

Restart

1. Turn off the machine and unplug

from the wall socket.

2. Check that nothing blocks the air

ﬂow through bent tube, hose, tube,

nozzle, dust bag or ﬁlters.

3. Let the machine cool down, for at

least 5-10 minutes.

4. Plug in the machine again and

start using the start/stop button.

The machine will not start

until it is sufﬁciently cool. If the

machine does not start turn it off

using the start/stop button and

unplug. Try again in a while.

Parking the tube and nozzle

There are two grooves for parking.

One located on the underside to use

when machine stands on the back,

and the other on the back to use when

the machine is standing on its wheels.

Service and maintenance

• Store the machine in a dry

environment.

• Change the preﬁlter with every

fourth dust bag. The dust bag

package includes four dust bags

and one preﬁlter.

• Clean the machine surface with a

dry cloth or a damp cloth with a

little dishwashing liquid.

• Original accessories are available

from a local dealer.

• Service – contact your local dealer.

Recycling and disposal

Recycle packing and dispose of the

machine as recommended by your

local authority. Cut the cable close to

the machine to prevent injury or use

of the defective/disposed machine.

Environmental commitment

This machine is designed in an

environmentally conscious manner.

All plastic parts is marked for

recycling.

Responsibility

Nilﬁsk disclaim all responsibility for all

damage caused by incorrect use or

modiﬁcation of the machine.

Information

For more information see

www.nilﬁsk.com

Guarantee

The warranty can vary between

different countries. Contact your local

dealer for information.

Trouble shooting

Repair and service of your cleaner,

must only be carried out by an

authorized service center.

If the machine

does not start

Check that the plug

is correctly ﬁtted to

the wall socket.

A fuse in the building

may have blown and

need to be changed.

The cord or plug

may be damaged

and must be

repaired by an

authorized service

center.

If non of the above

actions will apply

- leave your cleaner

to an authorized

service center.

Reduced

suction power

The dust bag may

be full and needs

to be changed, see

instructions.

The preﬁlter or

HEPA ﬁlter may be

blocked and have

to be changed, see

instructions.

The hose handle,

hose, tube or

nozzle may be

blocked and needs

to be cleaned.

If the machine

stops

The thermal fuse

may have blown,

see instructions.

Andere Handbücher für Power

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Nilfisk-Advance Staubsauger Handbücher

Nilfisk-Advance

Nilfisk-Advance CTS22 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance BUDDY 15 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 911 Battery Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance UZ 877 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance IV 022 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ATTIX 961-01 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Elite Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Multi 20 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SelectVac 12DC Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Neo Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 930 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance T22 Plus Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance STEAMTEC 312 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ELIMINATOR I Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 110 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance WhisperClean Handbuch

Nilfisk-Advance

Nilfisk-Advance SMART Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance UZ 934 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Multi 20 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance IVT 1000 CR H Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance VP930 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 35 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GM 100J Sprint Plus Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 3707 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung