Nilfisk-ALTO C 110.1 X-TRA Bedienungsanleitung

Nilﬁsk-ALTO C 100.3

Nilﬁsk-ALTO C 110.1

Nilﬁsk-ALTO C 110.1 X-TRA

User Manual .................................................... 3 - 15

15-03-2006

Index

1 Safety precautions and warnings .............................................3

2 Description ...............................................................................5

3 Before you start using your pressure washer...........................6

4 Operating your pressure washer ..............................................8

5 After using your pressure washer...........................................10

6 Maintenance...........................................................................11

7 Trouble shooting .....................................................................13

8 Further information.................................................................14

9 Technical data ........................................................................15

10 Declaration .............................................................................15

1 Safety Precautions and Warnings

Before starting

up your high-

pressure washer

for the ﬁrst time,

this instruction

manual must be

read through carefully. Save the

instructions for later use.

Safety instructions

marked with this

symbol must be

observed to pre-

vent danger to persons.

This symbol is

used to mark safety

instructions that

must be ob-

served to prevent

damage to the ma-

chine and its performance.

This symbol in-

dicates tips and

instructions to

simplify work and to ensure a

safe operation.



Do not let people who have not

been trained in the use of a

high pressure washer nor read

the instruction manual operate

the machine.

This appliance is not intended

for use by children or other

persons without assistance or

supervision if their physical,

sensory or mental capabili-

ties prevent them from using it

safely. Children should be su-

pervised to ensure that they do

not play with the appliance.

Before starting up your ma-

chine please check it carefully

for any defects. If you ﬁnd any,

do not start up your machine

and contact your Nilﬁsk-ALTO

distributor.

Especially check:

The insulation of the electric

cable should be faultless

and without any cracks. If the

electric cable is damaged,

an authorized Nilﬁsk-ALTO

distributor should replace it.

WARNING!

High pressure jets can be

dangerous. Never direct the

water jet at persons, pets,

live electrical equipment or

the machine itself.

Never try to clean clothes or

footwear on yourself or other

persons.

Hold the spray lance ﬁrmly

with both hands. The spray

lance is affected by a thrust

of up to 26.5 Nm during ope–

ration.

The operator and anyone in

the immediate vicinity of the

site of cleaning should take

action to protect themselves

from being struck by debris

dislodged during operation.

Wear goggles and protection

clothes during operation.

This appliance has been de-

signed for use with cleaning

agents supplied or recom-

mended by the manufacturer.

The use of other cleaning

agents or chemicals may

adversely affect the safety of

the appliance.

Symbols used to mark in-

structions

Disconnect from electrical

power supply before carrying

out user maintenance.

To ensure the appliance

safety only use original spare

parts from the manufacturer

or approved by the manufac-

turer.

High pressure hoses, ﬁttings

and couplings are important

for the safety of the appli-

ance. Only use hoses, ﬁttings

and couplings recommended

by the manufacturer.

Do not use the appliance

if a supply cord or impor-

tant parts of appliance are

damaged, e.g. safety device ,

high pressure hose and trig-

ger gun.

The appliance is intended to

clean cars and garden etc..

Appropriate ear protection

has to be used.

Never use the machine in

an environment where there

could be a danger of explo-

sion. If any doubt arises,

please contact the local

authorities.

It is not allowed to clean as-

bestos-containing surfaces

with high pressure.

 This high pressure washer

must not be used at tempera-

tures below 0°C.

WARNING!

Inadequate extension cables

can be dangerous. Cables on

drums should always be com-

pletely unwinded to prevent the

cable from overheating.

If an extension cable is used,

the plug and the socket must be

waterproof and comply with the

below-mentioned requirements

for length and cable dimen-

sions.

1.0 mm² max. 12.5 m

1.5 mm² max. 20 m

2.5 mm² max. 30 m

If the electric cable is

damaged, it must be re-

placed by the manufacturer

or his service agent or simi-

larly qualiﬁed person in order

to avoid a hazard.

Mains power connection

The following should be ob-

served when connecting the

high pressure washer to the

electric installation:

The electric installation shall

be made by a certiﬁed elec-

trician and comply with IEC

364.

It is recommended that the

electric supply to this appli-

ance should include either a

residual current device that

will interrupt the supply if the

leakage current to earth ex-

ceeds 30 mA for 30 ms.

Water connection

Connection to the public

mains according to regula-

tions.

Inlet hose can be connected

to the water mains with a

max. inlet pressure of 10

bars.

IMPORTANT! Only use wa-

ter without any impurities. If

there is a risk of running sands

in the inlet water (i.e. from your

own well), an additional ﬁlter

should be mounted.

Safety devices

The unloader valve can re-

duce pressure if it exceeds

pre-set values.

Locking device on spray gun

(7a) (see foldout at the end of

this manual):

The spray gun features a lock-

ing device. When the pawl is

activated, the spray gun cannot

be operated.

Thermal sensor:

A thermal sensor protects the

motor against overloading. The

machine will restart after a few

minutes when the thermal sen-

sor has cooled.

2 Description

This high-pressure washer has

been developed for domestic

use within:

- Car, motorbike, boat, cara-

van, trailer, patio/drive/ﬂags-

tones, woodwork, brickwork,

barbecue, garden furniture,

lawn mower

Only use the high-pressure

washer for purposes described

in this manual.

The safety precautions must be

observed to prevent damage

to the machine, the surface to

be cleaned or severe personal

injuries.

2.2 Operation elements

and model survey

See foldout at the end of this

manual.

1 Start/stop switch

2 Water inlet with ﬁlter (2a)

3 High pressure connection

4 High pressure hose

5 Electric cable

6 Spray lance

7 Spray gun with lock (7a)

8 Multispeed®nozzle

9 Powerspeed®nozzle

10 Foam sprayer

11 Nozzle cleaning tool

12 Lance and nozzle holder

13 Model tag

14 Holder for electric cable (not

standard on all models)

Speciﬁcations: See model tag

(13) of machine.

We reserve the right to alter the

speciﬁcations.

2.1 Application

3 Before you start using your

pressure washer

3.2 Mounting of holder for

electric cable

1. Press the holder for electric

cable (14) on to the machine.

The holder is not standard on

all models.

3.1 Mounting of lance and

nozzle holder

3.3 Mounting of wheels (only

models including wheels)

1. Mount the wheel bracket

by pressing it into the guide

at the bottom of the ma-

chine and mounting the two

screws.

2. Mount the wheels by press-

ing them into the bracket.

1. Press the lance and nozzle

holder (12) on to the ma-

chine.

3.6 Mounting of high pres-

sure hose on spray gun

1. Screw the high pressure (4)

hose on to the spray gun (7).

3.4 Mounting of trolley

handle (models with trol-

ley handle)

1. Place the trolley handle on

the machine.

2. Secure the handle by mount-

ing the 2 screws.

3.5 Mounting of quick

coupling

1. Screw the quick coupling

tight on to the water inlet (2).

Note: The inlet ﬁlter (2a) must

always be ﬁtted in the water

inlet pipe to ﬁlter out sand, lime-

stone and other impurities as

these will damage the pump

valves.

Caution: Failure

to ﬁt the ﬁlter will

invalidate the

guarantee.



4 Operating your pressure washer

4.1 Connection of high pres-

sure hose

1. Mount the high pressure

hose on the outlet (3).

4.2 Mounting of spray lance,

nozzles and foam

sprayer

1. Push the spray lance (6) into

the spray gun (7) and screw

it on.

2. Attach the nozzle.

4.3 Water connection An ordinary 1/2" garden hose of

min. 5 m and max. 25 m will be

suitable.

NOTE: Connection to the public

mains according to regulations.

IMPORTANT! Only use wa-

ter without any impurities. If

there is a risk of running sands

in the inlet water (i.e. from

your own well), an additional

ﬁlter (106411231) should be

mounted.

1. Let the water run through the

water hose before connecting

it to the machine to prevent

sand and dirt from penetrat-

ing the machine.

Note: Check that the ﬁlter is

ﬁtted in the water inlet pipe

and that it is not clogged up.

2. Connect the water hose to

the water supply by means

of the quick connector (inlet

water, max. pressure: 10 bar,

max. temperature: 40°C).

3. Turn on the water.

4.4 Start and stop of the

machine

Do not cover the machine

during operation or use it in a

room without adequate ventila-

tion !

Note: If the ma-

chine is left or not

used for 5 min-

utes, it must be switched off on

the start/stop switch "O" (1):

1. Press the start/stop switch

"O".

2. Disconnect the electrical plug

from the socket.

3. Shut off the water supply and

activate the trigger to relieve

the machine of pressure.

4. Lock the spray gun (7a).

When releasing the trigger of

the spray gun, the machine

automatically stops. The ma-

chine will start again when you

re-activate the spray gun.

The spray lance is affected

by a thrust during operation

- therefore always hold it ﬁrmly

with both hands. IMPORTANT:

Point the nozzle at the

ground.

1. Check that the machine is in

horizontal position.

NOTE: Do not place the ma-

chine in high grass!

2. Release the trigger lock (7a).

3. Activate the trigger of the

spray gun and let the water

run until all air has escaped

from the water hose.

4. Press the Start/stop switch

"I" (1).

5. Activate the trigger of the

spray gun.

Always adjust the distance and

thus the pressure of the nozzle

to the surface, which is to be

cleaned.

4.5 Regulation of spray

picture of Multispeed®

nozzle

The spray picture can be

regulated on the Multispeed®

nozzle.

5.2 Winding up of electric

cable and high pressure

hose

5 After using your pressure washer

To avoid accidents, the electric

cable and the high pressure

hose should always be winded

carefully up around the handle.

C 110.1 X-TRA: Wind up the

cable on the appropriate hook.

5.1 Storing the washer The machine should be sto-

red in a frost-free room!

Pump, hose and accessories

should always be emptied of

water prior to storing as follows:

1. Stop the machine (press the

start/stop switch “O” (1) and

detach water hose and ac-

cessory.

2. Restart the machine and

activate the trigger. Let the

machine run until no more

water runs through the spray

gun.

3. Stop the machine, unplug

and wind up hose and cable.

4. Place spray handle, nozzles

and other accessories in the

holders of the machine.

Should the machine by mistake

be frozen, it will be necessary

to check it for damage.

NEVER START-UP A FROZEN

MACHINE.

Frost damages are not

covered by the guarantee!



5.3 Storage of accessories The lance and the nozzles

can be stored on the pressure

washer.

6 Maintenance

WARNING! Always discon-

nect the electrical plug from the

socket prior to maintenance or

cleaning.

To ensure a long and problem

free working life, please take

the following advice:

Wash out water hose, high

pressure hose, spray lance

and accessories before

mounting.

Clean the connectors of dust

and sand.

Rinse the detergent spraying

attachment after use.

Clean the nozzles.

Any repair should always be

made in an authorized workshop

with original spare parts.

6.1 Cleaning of water inlet

ﬁlter

Clean the water inlet ﬁlter

regularly once a month or more

frequently according to use.

Carefully loosen the ﬁlter with a

screwdriver and clean it. Check

that it is intact before re-mount-

ing it.

The inlet ﬁlter must always be

ﬁtted inside the water inlet pipe

to ﬁlter out sand, limestone and

other impurities, as they will

damage the pump valves.

CAUTION: Failure to ﬁt the ﬁlter

will invalidate the guarantee.

6.2 Cleaning of nozzle A clogging up in the nozzle

causes a pump pressure which

is too high. This is why cleaning

is required immediately.

1. Stop the machine and dis-

connect the nozzle.

2. Clean the nozzle. IMPOR-

TANT: The cleaning tool (11)

should only be used when

the nozzle is detached!

3. Flush the nozzle backwards

with water.

Inhaltsverzeichnis

Andere Nilfisk-ALTO Hochdruckreiniger Handbücher

Nilfisk-ALTO

Nilfisk-ALTO Poseidon 4-28 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 2-19 X Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Nilfisk-ALTO C 110.2 X-TRA Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Neptune USG Series Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO 3 Series Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Uno Booster Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE NEPTUNE 1 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE PE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 1-20 XT Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE 4 FA Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 2-29 Betriebsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE NEPTUNE 2 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 5-54 DE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 3 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE 5 FA Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO MAXXI 4 Einrichtungshandbuch

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 5 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO 03KLU Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 7-52 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE PE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO E 140.1 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO POSEIDON 2-26 PORTABLE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE NEPTUNE 1 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO NEPTUNE 5 FA Bedienungsanleitung

Beliebte Hochdruckreiniger Handbücher anderer Marken

Shark

Shark RG-232637 Bedienungsanleitung

Shakti Technology

Shakti Technology S3 Bedienungsanleitung

Kärcher

Kärcher K 4 Pure Bedienungsanleitung

Porter-Cable

Porter-Cable D25806-025-2 Bedienungsanleitung

REM POWER

REM POWER HDEm 662 Bedienungsanleitung

Landa

Landa HS-3000 Bedienungsanleitung

Craftsman

Craftsman 580.752270 Bedienungsanleitung

HIKOKI

HIKOKI AW 100 Bedienungsanleitung

Delco

Delco DC 1302 Bedienungsanleitung

Kärcher

Kärcher K 3 Full Control Bedienungsanleitung

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Bedienungsanleitung

ARKSEN

ARKSEN 014-HG-14141-HR Bedienungsanleitung

Black & Decker

Black & Decker PW1700SPX Bedienungsanleitung

Kärcher

Kärcher 595 - SPARE Leitfaden

Kranzle

Kranzle B 10 200 Bedienungsanleitung

Stihl

Stihl RE 90 Bedienungsanleitung

PowR-Quip

PowR-Quip PQ-2600 Bedienungsanleitung

Hotsy

Hotsy 5645 Bedienungsanleitung