Nokia Xpress-on Bedienungsanleitung
DN0460429
Issue 1-0 en
Nokia Mobile RFID Kit for Nokia
5140
User’s Guide
Mobile_RFID_kit.book Page 1 Friday, May 14, 2004 6:02 PM
FCC ID: LJPR1
IC: 661E-R1
Copyright © 2004 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia
Corporation. Other product and company names mentioned herein may be trademarks or
tradenames of their respective owners.
MIFARE is a registered trademark of Royal Philips Electronics.
Java is a trademark of Sun Microsystems, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ’as is’. Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
168
Mobile_RFID_kit.book Page 2 Friday, May 14, 2004 6:02 PM
3
Contents
FOR YOUR SAFETY.................... 4
1. Introduction .......................... 5
Introduction to RFID...............................5
Nokia Xpress-on™ RFID
Reader Shell ..............................................6
Shortcut application and
RecordData application .........................6
Tags..............................................................7
2. Installation ............................ 8
Installing the Reader Shell and
downloading the applications .............8
Checking the phone settings ............9
Placing tags...............................................9
3. Basic functions of Nokia
Mobile RFID Kit......................... 9
Touching tags with RFID reader..........9
Starting an application....................... 10
Closing an application ........................ 10
Changing application language ....... 11
4. Using Shortcut
application ...............................11
Launching a shortcut .......................... 11
Defining a shortcut.............................. 12
Viewing the log..................................... 13
Deleting a shortcut .............................. 13
5. Using RecordData
application ...............................14
Recording data ...................................... 14
Viewing recorded data........................ 15
Editing recorded data.......................... 16
Deleting recorded data ....................... 16
Editing tag information ...................... 17
Deleting a tag........................................ 17
6. Care and maintenance ........17
Mobile_RFID_kit.book Page 3 Friday, May 14, 2004 6:02 PM
FOR YOUR SAFETY
4
FOR YOUR SAFETY
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this manual.
QUALIFIED SERVICE
Only qualified personnel may repair this device.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user's guide for
detailed safety instructions. Do not connect incompatible
products.
Mobile_RFID_kit.book Page 4 Friday, May 14, 2004 6:02 PM
Introduction
5
1. Introduction
Nokia Mobile RFID Kit enables you to use touch to automate different
tasks in your Nokia 5140 phone. By touching Radio Frequency
Identification (RFID) tags, you can launch predefined functions in the
phone (such as call dialling and web browsing) and store time stamped
data in the phone.
Nokia Mobile RFID Kit contains the following:
• Two Nokia Xpress-on™ RFID Reader Shells
• Two Java™ applications called Shortcut and RecordData
• Tags to identify objects and tasks
Your device and its enhancements may contain small parts. Keep them
out of reach of small children.
Nokia Mobile RFID Kit is only compatible with the Nokia 5140 phone
that is available separately. For information about the Nokia 5140
phone, see www.nokia.com.
Note: This User’s Guide contains information and instructions
for Nokia Mobile RFID Kit. For instructions on how to use your
Nokia 5140 phone, see the Nokia 5140 user’s guide.
For examples of how you can use your Nokia Mobile RFID Kit, see
www.nokia.com/rfid.
■Introduction to RFID
RFID technologies use radio waves to automatically identify individual
objects. The most common method of identifying objects using RFID is
to store a serial number that identifies the object on an RFID tag (also
called an RFID transponder), and attaching the tag to the object.
The RFID tag is able to transmit the information it contains to an RFID
reader device. The RFID reader converts the radio waves returned from
the RFID tag into a format that can then be passed on to an application
in the phone.
Mobile_RFID_kit.book Page 5 Friday, May 14, 2004 6:02 PM
Introduction
6
To transmit data from the RFID tag to the RFID reader, Nokia Mobile
RFID Kit uses the radio frequency of 13.56 MHz, which is the most
widely used globally available frequency for RFID.
■Nokia Xpress-on™ RFID Reader Shell
Nokia Xpress-on™ RFID Reader Shell contains the RFID
reader that enables you to read tags with your Nokia
5140 phone. The RFID reader is located inside the
lower part of the shell (dark area in the picture).
The Xpress-on™ RFID Reader Shell also stores the
Shortcut and RecordData applications, as well as a
Cover browser application. When you install the
Xpress-on™ RFID Reader Shell, the Cover browser
application is automatically downloaded to the
phone, after which you can use it to download the
other two applications.
Both of the Xpress-on™ RFID Reader Shells in Nokia Mobile RFID Kit
contain all three applications.
Note: The Xpress-on™ RFID Reader Shell is only compatible
with the Nokia 5140 phone. Do not try to use it with other
phones. Do not try to open the Xpress-on™ RFID Reader Shell.
The RFID reader in the Xpress-on RFID Reader Shell takes its
power from the phone battery. Note that using the RFID reader
may drain the phone battery faster.
■Shortcut application and RecordData application
The Shortcut and RecordData applications are used for managing tag-
related information and functions in your Nokia 5140 phone.
• The Shortcut application enables you to define functions that
touching a tag will launch in your Nokia 5140 phone.
You can define that when you touch a tag, the phone either makes a
phone call to a predefined number, sends a text message using Short
Message Service (SMS) to a predefined number, or connects to a
predefined web site over a General Packet Radio Service (GPRS)
connection.
Mobile_RFID_kit.book Page 6 Friday, May 14, 2004 6:02 PM
Introduction
7
• The RecordData application enables you to store tag-specific
information in the application each time you touch a tag.
For example, in order to keep track of your travel expenses, you can
attach a tag to the dashboard of a car, and store time stamped
records of the beginning and ending of a journey to track mileage.
In both applications, data is stored in the phone memory.
■Tags
The tags provided with Nokia Mobile RFID Kit are used to identify
objects and tasks.
All tags have a unique serial number that the Shortcut and RecordData
applications use to identify the tags. When taking a tag into use with an
application, you associate the tag serial number with an object or task,
depending on which application the tag is to be used with.
You can use each tag with one or both of the two applications. This
means that depending on which application is active in the phone,
touching a tag can either launch a predefined task in the Shortcut
application (such as making a phone call to a number you have
specified) or make the RecordData application ask you to enter
information that will be recorded for the tag.
Nokia Mobile RFID Kit uses non battery-powered (passive) tags. Only
tags that are compliant with the MIFARE® UltraLight protocol can be
used.
Nokia Mobile RFID Kit contains two tags. If you need more tags, please
contact your vendor for MIFARE® UltraLight tags.
Note: The tags may set off the Electronic Article Surveillance
(EAS) alarms used, for example, for theft-protection in shops.
Mobile_RFID_kit.book Page 7 Friday, May 14, 2004 6:02 PM
Installation
8
2. Installation
■Installing the Reader Shell and downloading the
applications
When taking Nokia Mobile RFID Kit into use, first install the Xpress-on™
RFID Reader Shell to your Nokia 5140 phone.
When the Xpress-on™ RFID Reader Shell is installed, the Cover browser
application is automatically downloaded from the shell to the phone.
You can then use the Cover browser application to download the
Shortcut and RecordData applications.
Note: Before removing the phone cover, always switch off the
power and disconnect the charger and any other device. Avoid
touching electronic components while changing the covers.
Always store and use the device with the covers attached.
To install Reader Shell and download applications:
1. Remove the phone cover, and install the upper and lower part of the
Xpress-on™ RFID Reader Shell as instructed in the user guide of your
Nokia 5140 phone.
2. Switch on the phone.
The Cover browser application is automatically downloaded into the
Collection submenu of the Applications menu in the phone.
Downloading may take a few minutes.
3. Press Start to start the Cover browser application.
4. To download the Shortcut or the RecordData application from the
shell to the phone, select Shortcut or RecordData and press Select.
The selected application is downloaded into the Collection submenu
in the phone. Downloading may take a few minutes.
If you also wish to download the other application from the shell to the
phone, start the Cover browser application in the Collection submenu
and follow the instructions in step 4.
Mobile_RFID_kit.book Page 8 Friday, May 14, 2004 6:02 PM
Basic functions of Nokia Mobile RFID Kit
9
Checking the phone settings
Ensure that your Nokia 5140 phone has the correct settings for using
SMS and GPRS.
For the availability of the SMS or GPRS service, related fees, and
appropriate settings, contact your network operator or service provider.
The vibrating alert should be on in the active profile in the phone.
■Placing tags
Having installed Xpress-on™ RFID Reader Shell to your Nokia 5140
phone, you can start placing tags.
You can attach tags, for example, by using double-sided adhesive tape.
You can also place tags under any non-conductive material, such as
glass, plastic or wood.
Do not place tags on metal or other conductive surfaces, as it may
prevent the RFID reader from being able to read the tags.
3. Basic functions of Nokia Mobile
RFID Kit
■Touching tags with RFID reader
The RFID reader is located on the back of the lower part of the Xpress-
on™ RFID Reader Shell, inside the area marked with the graphic sign.
Mobile_RFID_kit.book Page 9 Friday, May 14, 2004 6:02 PM
Basic functions of Nokia Mobile RFID Kit
10
When using the RFID reader, touch the tag with that area at close
proximity. The reading range is typically 0-3 cm.
■Starting an application
Note: If neither the Shortcut nor the RecordData application is
active when you touch a tag with the RFID reader, the phone
automatically starts the one that was last active in the phone.
To manually start an application:
1. Press Menu.
2. Scroll to Applications and press Select.
3. Select Collection and press Select.
4. Select Select application and press Select.
5. Select Shortcut or RecordData and press Open.
Please touch tag is displayed.
Note: If you receive an incoming call while using an
application, you can answer the call normally and continue
using the application after ending the call.
You can view basic information about each application by pressing
Options in the Please touch tag view, selecting About and pressing
Select.
■Closing an application
To close an application, either press Exit in the Please touch tag view, or
press .
Mobile_RFID_kit.book Page 10 Friday, May 14, 2004 6:02 PM
Andere Handbücher für Xpress-on
2
Inhaltsverzeichnis
Andere Nokia Andere Handbücher
Nokia
Nokia 7900 - Prism Cell Phone 1 GB Bedienungsanleitung
Nokia
Nokia 2660 - Cell Phone - GSM Bedienungsanleitung
Nokia
Nokia 6021 - Cell Phone 3.3 MB Bedienungsanleitung
Nokia
Nokia N70 Music Edition Bedienungsanleitung
Nokia
Nokia 5320 Xpress Music Bedienungsanleitung
Nokia
Nokia E5-00 Kurzanleitung
Nokia
Nokia 6360 Bedienungsanleitung
