Nokia NPM-6 Series Bedienungsanleitung

Andere Handbücher für NPM-6 Series

4

Inhaltsverzeichnis

Andere Nokia Transceiver Handbücher

Nokia

Nokia NSB-5 Series Leitfaden

Nokia

Nokia RH-27 Series Leitfaden

Nokia

Nokia RH-27 Series Leitfaden

Nokia

Nokia NME-3 Series Bedienungsanleitung

Nokia

Nokia RM-696 Bedienungsanleitung

Nokia

Nokia RH-27 Series Bedienungsanleitung

Nokia

Nokia RH-21 Series Leitfaden

Nokia

Nokia NSM-1 Series Montageanleitung

Nokia

Nokia NHM-4 Series Montageanleitung

Nokia

Nokia RH-34 Series Leitfaden

Nokia

Nokia NSC-1 SERIES Bedienungsanleitung

Nokia

Nokia NPC-1 Series Leitfaden

Nokia

Nokia RH-27 Series Leitfaden

Nokia

Nokia NSM-4 Series Montageanleitung

Nokia

Nokia RH-10 Series Betriebsanleitung

Nokia

Nokia NME-2A Series Leitfaden

Nokia

Nokia NKC-1X Series Leitfaden

Nokia

Nokia RH-57 Series Kurzanleitung

Nokia

Nokia NKC-1X Series Montageanleitung

Nokia

Nokia RM-11 Series Montageanleitung

Nokia

Nokia NME-3 Series Bedienungsanleitung

Nokia

Nokia NHM-4 Series Bedienungsanleitung

Nokia

Nokia N92 RM-100 Bedienungsanleitung

Nokia

Nokia NSB-5 Series Montageanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Customer Care Solutions

NPM-6 Series Transceivers

Issue 1 01/03 CopyrightãNokia. All rights reserved

Disassembly and Assembly

Instructions

Disassembly and Assembly Instructions CCS Technical Documentation

Page 2 Copyright ãNokia. All rights reserved Issue 1 01/03

Disassembling instructions ............................................................................................ 4

Exchange of system connector....................................................................................... 6

Exchange of battery connector...................................................................................... 8

CCS Technical Documentation Disassembly and Assembly Instructions

Issue 1 01/03 CopyrightãNokia. All rights reserved Page 3

Disassembling instructions

Note! It is only allowed to reassemble C-Cover (phone) once. For second reassem-

bling use of new C-Cover is mandatory! Use new screws in general.

Press the grip markings on both sides of the B-Shell and

remove B-Shell.

To remove the A-Shell press Locking Springs as shown and

pull A-Shell from the unit.

Tightening torques for screws (Note! Two tightening

torques!): -screws 1-4, use 40 Ncm

-screws 5-6, use 25 Ncm.

Tightening order for screws is from 1 to 6. When

tightening the screws 5 and 6 it is necessary to press

strongly the system connector against C-cover to avoid

sealing tape twisting in the system connector. If the

sealing tape twists with screw assembly it is not

waterproof anymore. Note! The screws can be assembled

only once.

Remove engine from C-Cover.

Separate the UI-Module from Radio Module carefully,

because of the board-to board-connector.

Use tweezers to remove Vibra Motor.

1

2

5

6

3

4

Disassembly and Assembly Instructions CCS Technical Documentation

Page 4 Copyright ãNokia. All rights reserved Issue 1 01/03

Remove Earpiece. Note the guiding pin when assembling Remove Keymat.

CCS Technical Documentation Disassembly and Assembly Instructions

Issue 1 01/03 CopyrightãNokia. All rights reserved Page 5

Exchange of system connector

The System Connector is attached with double-sided

adhesive gasket to C-Cover. Also note the gasket on C-

Cover.

Press SRT-6 between C-Cover and System Connector and

remove Battery Cover.

Press again SRT-6 between C-Cover and System Connector

and remove System Connector.

Remove System Connector.

To remove the remaining adhesive gasket use SRT-6 only.

Do not use sharp-edged tools for this procedure.

Remove protection foil from System Connector.

Disassembly and Assembly Instructions CCS Technical Documentation

Page 6 Copyright ãNokia. All rights reserved Issue 1 01/03

Place System Connector to its guidance exactly. Now press connector to C-Cover firmly, while taking care

not to slip C-Cover on your table.

CCS Technical Documentation Disassembly and Assembly Instructions

Issue 1 01/03 CopyrightãNokia. All rights reserved Page 7

Exchange of battery connector

These are the two soldered support angles. Use a side cutter to cut the support angles.

Push tweezers in outer openings of battery connector and

lift up the plastic cover.

Desolder all pins and clean the pads.

Note that you need a soldering iron with higher

temperature, when cleaning or soldering the grounding

pad.

Tin one of pads to fix the connector before soldering the

following pins.

Disassembly and Assembly Instructions CCS Technical Documentation

Page 8 Copyright ãNokia. All rights reserved Issue 1 01/03

Note location of connector pins and support angles to fit

them precisely.

Solder first support angle. When position is exactly, solder

the other pins.