Norac UC4 Total Control Bedienungsanleitung

Total Control

Automatic Boom Height

System

Redball 690 (2006+)

Installation Manual

Canada

NORAC Systems International Inc.

CALL TOLL FREE: 1-800-667-3921

(306) 664-6711

SHIPPING ADDRESS:

3702 Kinnear Place

Saskatoon, SK

S7P 0A6

United States

NORAC, Inc.

CALL TOLL FREE: 1-866-306-6722

(763) 786-3080

SHIPPING ADDRESS:

1290 Osborne Rd. NE, Suite F

Fridley, MN

55432-2892

For other service locations please view our website:

www.norac.ca

Improving the Competitiveness of Industry and Agriculture

through Precision Measurement

Printed in Canada

Reorder P/N: UC4-BC-RB1-INST Rev D (Redball 690)

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without

the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information

contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.

TABLE OF CONTENTS

1 INTRODUCTION .................................................................................................................................. 2

2 GENERAL SYSTEM DESCRIPTION .................................................................................................. 3

3 PARTS LIST......................................................................................................................................... 4

4 INSTALLATION PROCEDURE ........................................................................................................... 1

4.1 EXISTING HYDRAULIC SYSTEM FUNCTION CHECK ................................................................................ 1

4.2 BOOM SPEED TEST ............................................................................................................................ 2

4.3 WING SENSOR INSTALLATION ............................................................................................................. 4

4.4 MAIN ROLL SENSOR AND TARGET INSTALLATION ................................................................................ 8

4.4.1 The Mounting Brackets ........................................................................................................... 8

4.4.2 Mounting on the Boom ........................................................................................................... 9

4.5 HYDRAULIC INSTALLATION................................................................................................................ 14

4.5.1 Valve Assembly and Mounting .............................................................................................. 14

4.5.2 Hydraulic Plumbing ............................................................................................................... 18

4.6 ELECTRICAL INSTALLATION .............................................................................................................. 19

4.7 COMPLETING THE INSTALLATION....................................................................................................... 22

5 ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 23

5.1 ITEM C1: 44662B-40 –SENSOR TRUNK CABLE ................................................................................ 23

5.2 ITEM C2: 44668 –SENSOR BRANCH CABLE ..................................................................................... 23

5.3 ITEM C3: 44656 –VALVE CABLE (VARIABLE RATE) .......................................................................... 24

5.4 ITEM C4: 44651 –VALVE EXTENSION CABLE.................................................................................... 24

5.5 ITEM C10: 44650-35 –POWER CABLE GENERIC PULL-TYPE ............................................................ 25

5.6 ITEM C11: 44651-03 –EXTENSION CABLE VALVE GENERIC.............................................................. 26

5.7 ITEM C12: 44658-23 –WING INTERFACE CABLE .............................................................................. 27

5.8 ITEM C13: 44658-22 –MAIN INTERFACE CABLE ............................................................................... 28

1 INTRODUCTION

Congratulations on your purchase of the NORAC UC4 automated sprayer boom

height control system. This system is manufactured with top quality components

and is engineered using the latest technology to provide operating features and

reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage,

improve sprayer efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the

system. A thorough understanding of this manual will ensure that you receive the

maximum benefit from the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have

suggestions regarding the parts list or the installation procedure, please

don’t hesitate to contact us via the information given below:

Phone: 1-800-667-3921 in Canada (Toll Free)

1-866-306-6722 in the United States (Toll Free)

0-800-404-8389 United Kingdom (Toll Free)

1-306-664-6711 all other regions

E-mail: [email protected]

Website: www.norac.ca

2 GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4 Sprayer Boom Control

system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the accuracy of the information contained in

this manual. All parts supplied are selected to fit the sprayer and supply the

customer with a complete installation. However NORAC cannot guarantee all parts

fit as intended due to the variations of the sprayer by the manufacturer. Please

read this manual in its entirety before attempting installation.

ATTENTION:

When installing the UC4 system please be aware that at a point in the installation

your sprayer booms will be inoperative until the installation is complete. Any

installation procedure requiring boom movement will need to be done

first. Once the hydraulics have been disconnected you must complete the electrical

installation before the booms become operative.

3 PARTS LIST

The parts that come with your UC4 Sprayer Boom System are listed in Table 1. In

this document, the item number shown on the left side of this table references each

part.

Please ensure that all parts in your kit are present before proceeding with

your installation.

Table 1 – Redball 690 Kit Parts

Item Part Number Description Pcs Len

UC4-BC-RB1H KIT HARDWARE UC4 BOOM CONTROL REDBALL 690 1 EA

* BRACKET PARTS *

B10 44704 MOUNTING BRACKET UC3-BC VALVE 1 EA

B11 44740 MOUNTING BRACKET ROLL SENSOR UC4 1 EA

B12 44741 MOUNTING BRACKET ROLL SENSOR TARGET UC4 1 EA

B13* 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY

EXTENDED

2 EA

* CABLE PARTS *

C1 44662B-40 CABLE UC4 SENSOR TRUNK AMPF TO AMPF 1 EA

C2 44668 CABLE UC3 SENSOR 1 AMP RECEPT 3 AMP PLUG BC 1 EA

C3 44656 CABLE VALVE VARIABLE RATE 1 EA

C4 44651 CABLE VALVE VARIABLE RATE 1 EA

C10 44650-35 CABLE POWER GENERIC PULL-TYPE 1 EA

C11 44651-03 CABLE EXTENSION VALVE GENERIC 1 EA

C12 44658-23 CABLE INTERFACE UC4 C12 RB1 WINGS 1 EA

C13 44658-22 CABLE INTERFACE UC4 C13 RB1 MAIN 1 EA

* ELECTRONIC PARTS *

E1 4461BC UC4 BOOM CONTROL PANEL 1 EA

E2 44631 UC4 ULTRASOUND SENSOR 3 EA

* HYDRAULIC PARTS *

V1** 44933

44933S

VALVE PACKAGE CC LS PROP 2 STATION EXPANDABLE

W/FILTER

VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS

VARIABLE RATE

1 EA

H1 102897 HYD HOSE END 6WC 6FJX 1 EA

Item Part Number Description Pcs Len

H1 104459 HYD HOSE END 6WC 6FJX90 1 EA

H1 100655 HYD HOSE 2 WIRE 3/8 IN 1 32 IN

H2 102897 HYD HOSE END 6WC 6FJX 2 EA

H2 104459 HYD HOSE END 6WC 6FJX90 1 EA

H2 100655 HYD HOSE 2 WIRE 3/8 IN 1 32 IN

H3 102897 HYD HOSE END 6WC 6FJX 2 EA

H3 100655 HYD HOSE 2 WIRE 3/8 IN 1 22 IN

H4 102897 HYD HOSE END 6WC 6FJX 2 EA

H4 100655 HYD HOSE 2 WIRE 3/8 IN 1 22 IN

H5 103839 COUPLING HYD 6FJXR 6MJT 4 EA

H50 44928 ORIFICE INSERT .047 IN ONE WAY 2 EA

H51 103312 COUPLING HYD 6MB 6MJ 4 EA

H52 104369 COUPLING HYD 6MBP 2 EA

H53** 44920 SANDWICH BLOCK KIT - SINGLE ACTING 2 EA

* MISC. PARTS *

M1A 446BC-MAN-1 MANUAL UC4 BOOM CONTROL TECHNICAL LARGE

BOOKLET

1 EA

M1B 446BC-MAN-2 MANUAL UC4 BOOM CONTROL QUICK REFERENCE SMALL

BOOKLET

1 EA

M2 100084 TIE CABLE 21 IN BLACK 10 EA

M3 100091 TIE CABLE 7.5 IN BLACK 150 EA

M4 104409 FOAM DISC 45 PPI CONDUCTIV 1/2 X 2-5/8 DIA 6 EA

M5 105435 CHAIN 1/2 IN PLASTIC 3 42 IN

M6 100660 BOLT HEX NC GR5 PLTD 1/4 x 1 3 EA

M7 100853 NUT HEX NC GR5 PLTD 1/4 IN 3 EA

M10 UC4-BC-RB1-INST MANUAL INSTALLATION UC4 REDBALL 690 1 EA

M11 100615 BOLT HEX NC GR5 PLTD 3/8X3 2 EA

M12 100947 WASHER LOCK SPRING PLTD 3/8 IN 2 EA

M13 105618 BOLT CARRIAGE PLTD 3/8X9 FULL OR MIN 3IN

THREAD

2 EA

M14 44942 TUBING PLASTIC CLEAR PETG 2.75X.28 SLOTTED 1 16 IN

* In a kit shipped prior to February 1, 2007, the part number for Item B13 is 44722.

** If the part number for Item V1 (NORAC valve block) is 44933S, Items H53 are not

included in the kit. The #44933S valve block has solenoid valves whose engraved part

number is “105723”. Please see Section 4.5.1 for further details.

The parts that come with your UC4 System are shown below in their general

installation configuration.

Figure 2 – UC4 Boom Control Components

Figure 3 – Hydraulic Plumbing Schematic

NOTE: If the part number of Item V1 is 44933S, Items H53 are not included in the kit.

4 INSTALLATION PROCEDURE

Before installing the NORAC UC4 Boom Control System to your sprayer, it is

necessary to check that all functions of the existing hydraulic system are working

properly.

Furthermore, it is informative to determine how quickly your sprayer booms and

main (center) section are able to change their position without the UC4 System

installed. Doing so may illustrate the design strengths and constraints of your

sprayer’s mechanical and hydraulic configuration.

This information may also prove valuable when troubleshooting the installation,

and if you need to contact NORAC for installation support. For example, NORAC

support staff may use this information to determine if there are unwanted orifices

(or backwards orifices) remaining in the hydraulic system when the UC4 System is

installed.

Drive your sprayer onto a flat piece of land, without any obstructions in the way of

boom movement (e.g. power lines). Try to gain the best view of the booms and

involved cylinders as you can. This may be best done with two people: one in

the cab, and one outside. Perform following Function Check and Boom Speed

Test.

4.1 E

XISTING

YDRAULIC

YSTEM

UNCTION

HECK

Check that all functions of the existing hydraulic system of your sprayer by using

Table 2. There may be more functions in the existing hydraulic system. Please refer

to the sprayer’s operation manual and ensure checking all functions.

Table 2 – Hydraulic System Function Check Sheet

HYDRAULIC SYSTEM FUNCTION

INNER OUTER TIP* FIELD

OPERATION

FOLD UNFOLD FOLD UNFOLD FOLD UNFOLD UP DOWN

LEFT BOOM

RIGHT BOOM

MAIN BOOM N/A N/A N/A N/A N/A N/A

ROLL* N/A N/A N/A N/A N/A N/A

*Some sprayers may not have this function/section.

Andere Handbücher für UC4 Total Control

Inhaltsverzeichnis

Andere Norac Steuerungssystem Handbücher

Norac

Norac UC5-CAB-HG06-HG07 Bedienungsanleitung

Norac

Norac UC5 Can Bus Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4 Total Control Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Active Roll Control Bedienungsanleitung

Norac

Norac UC4 Plus Rogator 64 Series Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC7 Bedienungsanleitung

Norac

Norac UC4 Total Control Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac SPRA-COUPE 7000 Series Bedienungsanleitung

Norac

Norac UC5 CANbus Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC5 MAX Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC5 CAN BUS Case IH 20 Series Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung