Norac UC4+ Bedienungsanleitung

NITRO

(Miller 3200 Series 2006+, 90/120ft Boom)

Installation Man al

Spray Height Controller

Improving the competitiveness of Ind stry and

Agric lt re thro gh Precision Meas rement

Printed in Canada

Reorder P/N: UC4+BC+NT3-INST Rev D (Nitro 32000 Series 2006+)

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the

requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained

in this manual. The technical information in this manual was reviewed at the time of approval for publication.

TABLE OF CONTENTS

INTRODUCTION..................................................................................................................................1

GENERAL SYSTEM DESCRIPTION ..................................................................................................2

PARTS LISTS ......................................................................................................................................3

INSTALLATION PROCEDURE...........................................................................................................7

4.1

EXISTING SYSTEM CHECK ...............................................................................................................7

4.2

BOOM SPEED TEST........................................................................................................................7

4.3

WING SENSOR INSTALLATION.........................................................................................................9

4.4

MAIN LIFT SENSOR INSTALLATION................................................................................................12

4.5

HYDRAULIC INSTALLATION ...........................................................................................................15

4.5.1

Valve Mounting......................................................................................................................15

4.5.2

Hydraulic Plumbing ...............................................................................................................16

4.6

ELECTRICAL INSTALLATION..........................................................................................................17

4.7

COMPLETING THE INSTALLATION ..................................................................................................21

ELECTRICAL REFERENCE – CABLE DRAWINGS........................................................................22

5.1

ITEM C01: 44662B-40 –SENSOR TRUNK CABLE.........................................................................22

5.2

ITEM C02: 44668 –SENSOR BRANCH CABLE...............................................................................22

5.3

ITEM C03: 44656 –VALVE CABLE (VARIABLE RATE)....................................................................24

5.4

ITEM C04: 44651 –VALVE EXTENSION CABLE ............................................................................24

5.5

ITEM C10: 44650-22 –NITRO POWER CABLE..............................................................................25

5.6

ITEM C11: 44688 –VALVE DISCONNECT EXTENSION 4FT CABLE ..................................................26

HYDRAULIC PLUMBING USING THE ADAPTER KIT....................................................................27

6.1

HYDRAULIC PLUMBING.................................................................................................................29

6.1.1

Hydraulic Plumbing ...............................................................................................................30

INTRODUCTION

Congratulations on your purchase of the NORAC UC4+ Spray Height Controller. This system is

manufactured with top quality components and is engineered using the latest technology to

provide operating features and reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage, improve

sprayer efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the system. A

thorough understanding of this manual will ensure that you receive the maximum benefit from

the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have suggestions

regarding the parts list or the installation procedure, please don’t hesitate to contact us via

the information given below:

Phone: 1-800-667-3921 Canada (Toll Free)

1-866-306-6722 United States (Toll Free)

0-800-404-8389 United Kingdom (Toll Free)

1-306-664-6711 all other regions

E-mail: [email protected]

Website: www.norac.ca

GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4+ Spray Height Control system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the

accuracy of the information contained in this

manual. All parts supplied are selected

specially to fit the sprayer to facilitate a

complete installation. However, NORAC

cannot guarantee all parts fit as intended due

to the variations of the sprayer by the

manufacturer. Please read this manual in

its entirety before attempting installation.

ATTENTION:

When installing the UC4+ Spray Height

Control system please be aware that at a

point in the installation your sprayer booms

will be inoperative until the installation is

complete. Any installation procedure

requiring boom movement will need to be

done first. Once the hydraulics have been

disconnected you must complete the

electrical installation before the booms

become operative.

PARTS LISTS

The parts that come with your UC4+ Sprayer Boom System are listed in Table 1. The item number on

the left side of this table references each part.

Please ensure that all parts in your kit are present before proceeding with your installation.

Table 1 – Nitro 3200 Series Spray Height Control System Parts (Rev C)

Item Part Number Name Quantity

B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7 5 IN 1

B10 44700-05 MOUNTING BRACKET VALVE NITRO BC KIT 1

B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1

B16 44701-01 KIT ACCESS PANEL CAB 1

B19 44729 MOUNTING BRACKET NITRO UNIVERSAL SPRING BREAKAWAY 2

C01 44662B-40 CABLE UC3 SENSOR TRUNK AMPF TO AMPF BLACK STANDARD 40FEET 1

C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1

C02B 44664 CABLE UC4 CAN NODE DUAL 5 FT

C02C 44687 CABLE UC3 SENSOR TRUNK PT EXTENSION AMPM TO AMPF BLACK 1

C03 44656 CABLE VALVE VARIABLE RATE 1

C04 44651 CABLE VALVE EXTENSION 1

C10 44650-22 CABLE POWER UC3 BC NITRO 1

C11 44688 CABLE VALVE DISCONNECT EXTENSION 4FT 1

E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1

E02 44631 UC4 ULTRASOUND SENSOR 3

E03 44642 UC4 PLUS ROLL SENSOR 1

E04 44641 UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE 1

H04 44863-39 HOSE ASSEMBLY 122R2-06 86 IN L 6FORX45 6FORX90 2

H06 44863-42 HOSE ASSEMBLY 122R2-06 110 IN L 6FORX90 8FORX 1

H08 44863-43 HOSE ASSEMBLY 122R2-06 144 IN L 6FORX90 8FORX 1

H20 44865-40 HYDRAULICS FITTING KIT - NT4 1

M01A 446BC+MAN6-1 MANUAL UC4+ BOOM CONTROL 2008 OPERATORS SMALL BOOKLET 1

M01B 446BC+MAN6-2 MANUAL UC4+ BOOM CONTROL 2008 QUICK REFERENCE SMALL BOOKLET 1

M10 UC4+BC+NT3-INST MANUAL INSTALLATION UC4+ NITRO (BLOCK SERIAL # 21 12733 AND HIGHER) 1

V01 44933S VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS VARIABLE RATE 1

Table 2 - 44865-40 - Hydraulics Fittings Kit Details

Item Part Number Name Quantity

Picture

F01 104369 PLUG - 6MBP 2

F02 103312 MALE ADAPTER - 6MB-6MOR 4

F04 104707 MALE ADAPTER - 8MB-6MOR 2

F08 44948 ORIFICE INSERT 067" 2

F09 101827 PLUG - 8MBP 2

6 M B - 6 M OR X 90

SIZE IN

1/16

TH'S

GENDER: MALE

OR FEMALE

ANGLE

SWIVEL

TYPE

GENDER

SIZE

TYPE:

B - ORB

J - JIC

OR - FLAT

FACE

P - PIPE

Fitting Name

Example:

The parts that come with your UC4+ Spray Height Control System are shown below in their general

installation configuration.

Figure 2 – UC4+ Spray Height Control Components

Figure 3 – Hydraulic Plumbing Schematic

INSTALLATION PROCEDURE

4.1 E

XISTING SYSTEM CHECK

It is necessary to check the existing system’s

functionality before installing the UC4+

Spray Height Control system.

1. Drive your sprayer onto a flat piece of

land, with unobstructed boom movement

(e.g. no power lines).

2. Test that all boom functions operate

correctly. As you test each function check it

off in Table 3.

It is necessary to test the boom

functions in all directions

Table 3 – Hydraulic System Function

Check Sheet

BOOM

FOLD

OUT UP DOWN

LEFT

MAIN

RIGHT

4.2 B

OOM

PEED

EST

IMPORTANT:

Raise/lower all boom sections several

times to warm up the hydraulic system.

Grease all moving parts for consistent

results.

1. Lower each boom and main section as

close to the ground as possible.

2. Set your sprayer at field working RPM

on the throttle and mark this value in

Table 4.

You will need a stopwatch or a

watch that displays “seconds” for

the next step.

3. Raise the LEFT boom from its extreme

LOW position to the very TOP of its

travel. Record the time this takes in

Table 4, “Trial #1” for “Left UP”.

4. Lower the LEFT boom from its extreme

HIGH position to the BOTTOM of its

travel. Record this time in Table 4, Trial

#1, for “Left DOWN”.

Be careful when lowering the

booms so they don’t hit the

ground.

5. Similarly, record two more time trials

(Trial #2 & #3) for the LEFT boom and

record in Table 4

6. Repeat Steps 1 through 5 for the RIGHT,

and MAIN functions.

Your sprayer may not have a roll

feature.

7. Average the three trials recorded for

each boom movement and record this

calculation in the “Average Time” slot in

Table 4.

8. These “Average Times” now represent

how quickly your system can react to

manual control. In Section 4.8, this

procedure is repeated with the UC4+

Spray Height Control system installed

for comparison and troubleshooting

purposes.

Andere Handbücher für UC4+

Inhaltsverzeichnis

Andere Norac Controller Handbücher

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4 Plus Rogator 74 Series Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4+ Raptor Pro 1200 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4+ NITRO Miller 3200 Series Bedienungsanleitung

Norac

Norac UC4 Plus Rogator 64 Series Bedienungsanleitung

Norac

Norac UC4+ TA 1200 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung