NordicTrack Elite 2900 NTL16905.0 Bedienungsanleitung

Mode_ No. NTL16905°0

Seria_ No.

Write the serial number in the space

above for future reference.

Serial

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction, if you

have questions, or if parts are

damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY°

CALL TOLL-FREE:

1°888°825°2588

Mon°-FrL, 6 a°m°-6 p.m. MST

ON THE WEB:

www°nordictrackservice°com

2900

www.nordictrack.com

new products, prizes,

fitness tips, and much more!

2900

TABLE OF CONTENTS

IMPORTANT PRECAUTRONS ................................................................. 3

BEFORE YOU BEGRN ....................................................................... 5

ASSEMBLY ............................................................................... 6

TREADMRLL OPERATRON ................................................................... 11

HOW TO FOLD AND MOVE THE TREADMRLL .................................................. 25

TROUBLESHOOTRNG ...................................................................... 27

EXERCRSE GURDEUNES ................................................................... 29

PART UST ............................................................................... 30

HOW TO ORDER REPLACEMENT PARTS ..................................................... 31

UMFED WARRANTY ............................................................... Back Cover

Note: An EXPLODED DRAWRNG is attached in the center of this manual.

NordicTrack is a registered trademark of RCONRP,Rnc.

iMPORTANT PRECAUTIONS

Protect yourself and

others from risk of serious

injury. Read the user's

manual and :

,Stand oniy on the

side raiis when

starting or stopping

treadmill.

.Change speed in

small increments.

•HoHd handrails to

prevent famiing, and

aiways wear the

safety dip while

operating treadmill

•Stop if you feel faint,

dizzy, or short of

breath.

Fully engage storage

Hatch before tread-

miil is moved or

stored.

•Reduce incline to its

lowest level before

folding treadmiHHinto

storage position.

•Never aHBow

chimdren on or

around treadmiHL

•Removekey when

not in use.

,Keep clothing,

fingers, and hair

away from moving

beHt.

,Never try to adjust

or fixthe beHtwhiHe

it is moving.

,AHways wear

athHetic shoes whime

operating treadmiHL

The deca_s shown here have been pmaced

on the treadmi& if a decam is missing or iF

_egib_e, calmthe tomFfree temephone number

on the front cover of this manua_ and order

a free replacement decal Apply the deca_

in the location shown. Note: The deca_ may

not be shown at actua_ size.

KEEPHANDSAND FEETAWAY

FROMTHHSAREAWHILETHE

TREADMILLISINOPERATMON,

BEFORE YOU BEGUN

Thank you for selecting the revolutionary NordicTrack _

ELITE 2900 treadmill. The ELITE 2900 treadmill offers

an impressive selection of features designed to make

your workouts at home more enjoyable and effective.

And when you're not exercising, the unique ELITE

2900 treadmill can be folded up, requiring less than half

the floor space of other treadmills.

For your benefit, read this manua_ carefully before

using the treadmill. If you have questions after read-

ing this manual, see the front cover of this manual. To

help us assist you, please note the product model

number and serial number before calling. The model

number of the treadmill is NTL16905.0. The serial

number can be found on a decal attached to the tread-

mill (see the front cover of this manual for the location).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Accessory Tray

Handrail

Latch Knob Key/Clip

Handgrip Pulse Sensor

Walking Belt

FRONT

Foot Rail Reset!Off

Breaker

BACK Power Cord

Adjustable Cushioned

Walking Platform

Rear Roller

Adjustment Bolts

Assemblyrequirestwopersons.Setthetreadmillinaclearedareaandremoveallpackingmaterials.Donot

disposeofthepackingmaterialsuntilassemblyiscompleted.Note:Theundersideofthetreadmillwalkingbeltis

coatedwithNgh_performancelubricant.Duringshipping,asmallamountoflubricantmaybetransferredtothe

topofthewalkingbeltorthesNppingcarton.Thisisanormalconditionanddoesnotaffecttreadmillperfor-

mance.Ifthereislubricantontopofthewalkingbelt,simplywipeoffthelubricantwithasoftclothandamild,

non-abrasivecleaner.

[

Assembly requires the included allen wrench _ and your own phillips screwdriver

For help identifying assembly hardware, see the drawings below. Note: If a part is not found in the part bags,

check to see if the part has been preattached. To avoid damaging p_astic parts, do not use power too_s for

assembly.

Upright Star Handrail Star

Washer (71)-6 Washer (90)-6

Washer (78)-6

Handrail Bolt (64)-6

Upright Bolt (72)-6

1. Identify the Left and Right Uprights (73, 74). The Left

Upright has two large holes in the indicated locations.

Set the Right Upright (74) near the Frame (48) as

shown. Insert the Upright Wire Harness (75) into the

lower end of the Right Upright and out of the top.

Place an elastic band around the Upright Wire Harness

(75) and the Right Upright (74) to keep the Upright Wire

Harness from falling into the Right Upright. Leave the

elastic band on until step 6.

Large Hole

Band

74 Small

Holes

73 Large Hole

,Insert the Right Upright (74) into the indicated bracket on

the Base (83); be careful not to dislodge the Cage

Nuts (76} from the Right Upright (see the inset draw-

ing). in addition, be careful not to pinch the Upright

Wire Harness (75)° Finger tighten three Upright Bolts

(72) with three Washers (78) and three Upright Star

Washers (71) into the Right Upright and the bracket. Do

not tighten the Upright Bolts yet.

Repeat this step with the Left Upright (not shown). Note:

There is not a wire on the left side.

Bracket

,Attach the Catch (5) to the left side of the Frame (48) with

two 3/4" Screws (4).

With the help of a second person, raise the Frame (48) to

a vertical position. Be careful not to raise the Frame

past the vertical position. Have the other person hold

the Frame until step 5 is completed°

448

,Hold the cylinder end of the Shock (88) near the bracket

in the center of the Frame (48).

See the two small inset drawings. Using your fingernail

or the end of a screwdriver, press on the end of the

Shock Pin (102) to loosen it from the Shock (88). Next,

rotate the Shock Pin and pull it out of the Shock. Be

careful to avoid losing the Shock Pin.

Orient the Shock (88) so it is in the position shown. Press

the end of the Shock onto the ball on the bracket.

See drawing 4a. Insert the Shock Pin (102) into the two

indicated small holes in the end of the Shock (88). Then,

rotate the Shock Pin until it clips onto the Shock. Note:

Extra Shock Pins are included.

Cylinder

102

88 48

Bracket 102

Ho_e

.Remove the Shock Pin (102) from the lower end of the

Shock (88).

Next, press the lower end of the Shock (88) onto the ball

on the bracket on the Base (83). ff necessary, pivot the

Frame (48) slightly and rotate the Shock to align the end

of the Shock with the ball on the bracket.

See drawing 5a. insert the end of the Shock Pin (102)

into two of the small holes in the end of the Shock (88).

Then, rotate the Shock Pin until it clips onto the Shock.

Carefully lower the Frame (48) to the floor.

"ket

Remove the elastic band holding the Upright Wire

Harness (75). Insert the Upright Wire Harness (75)

through a Handrail Spacer (95). Press the Handrail

Spacer into the top of the Right Upright (74). Press a

Handrail Spacer into the Left Upright (73).

Have two people hold the console assembly near the Left

Upright (73) and the Right Upright (74). Connect the

Upright Wire Harness (75) to the console wire. Make sure

to connect the connectors proper_y (see the inset

drawing}; the connectors should s_ide together easily

and snap into p_ace° If the connectors do not slide to-

gether easily and snap into place, turn one connector and

try again to connect them. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS TURNED ON.

Insert the Upright Wire Harness (75) and the console

wire into the Right Upright (74). Next, insert the brackets

on the console assembly into the Right Upright and the

Left Upright (73). Be carefu_ not to pinch the wires.

Finger tighten three Handrail Bolts (64), with three

Handrail Star Washers (90), into the Right Upright (74)

and console assembly. Repeat with the Left Upright (73).

After a_l six Handrai_ Bolts have been started, tighten

the four front Handrai_ Bo_ts first before the other

two Bo_ts°

Console

Assembly

73 Wire

Assembly

8. 8

Press the Latch Sleeve (96) into the Left Upright (73). Rf

necessary, use a rubber mallet to fully insert the Sleeve.

Remove the knob from the pin. Make sure that the collar

and the spring are on the pin. Next, insert the pin into

the Latch Sleeve (96) and the Left Upright (69), and

tighten the knob back onto the pin.

Knob

Spring _

Collar

.Place the treadmill in the storage position (see HOW TO

FOLD THE TREADMRLL FOR STORAGE on page 25).

Center the Frame (48) between the Uprights (73, 74).

Tighten the Upright Bolts (72) in the lower ends of the

Uprights (73, 74).

10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may

be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking

belt (see page 28). To protect the floor or carpet, place a mat under the treadmill.

if you purchase the optional chest pulse sensor (see page 24), follow the steps below to install the re-

ceiver included with the chest pulse sensor.

1. Make sure that the power cord is unpmugged. Remove

the indicated Screw (13) and the Access Door (70) from

the bottom of the Console Base (65).

2. Connect the wire on the receiver (A) to the indicated wire

extending from the Console Base (65), Hold the re-

ceiver so the small cylinder is oriented as shown.

Attach the receiver to the plastic posts on the Access

Door (70) with the two included small screws.

3. Make sure that no wires are pinched. Reattach the

Access Door (70) with the Screw (13). The other wires in-

cluded with the receiver may be discarded.

Screws

Small

Cylinder

13,_-$ 70

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Tretmühle Handbücher

NordicTrack

NordicTrack NTL29008.0 Bedienungsanleitung

NordicTrack

NordicTrack C 2300 NTL12944 Bedienungsanleitung

NordicTrack

NordicTrack T9 Si Cwl Treadmill Systemhandbuch

NordicTrack

NordicTrack S3000 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL15909.1 Bedienungsanleitung

NordicTrack

NordicTrack NTL21905.1 Bedienungsanleitung

NordicTrack

NordicTrack AudioStrider NTL25530 Bedienungsanleitung

NordicTrack

NordicTrack Reflex 4500 Pro Treadmill Bedienungsanleitung

NordicTrack

NordicTrack ZS Bedienungsanleitung

NordicTrack

NordicTrack T 13.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL14011.0 Bedienungsanleitung

NordicTrack

NordicTrack C2000 NTL10842 Bedienungsanleitung

NordicTrack

NordicTrack Commercial CT Bedienungsanleitung

NordicTrack

NordicTrack C 700 Bedienungsanleitung

NordicTrack

NordicTrack C900 Pro Bedienungsanleitung

NordicTrack

NordicTrack 24928.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL07806.5 Bedienungsanleitung

NordicTrack

NordicTrack NTL18907.1 Bedienungsanleitung

NordicTrack

NordicTrack CTL8250 Bedienungsanleitung

NordicTrack

NordicTrack T8.5S Bedienungsanleitung

NordicTrack

NordicTrack NTTL09711 Bedienungsanleitung

NordicTrack

NordicTrack T 12.2 Treadmill Benutzerhandbuch

NordicTrack

NordicTrack 2150 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack E 3100 Bedienungs- und Wartungshandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch

Horizon Fitness

Horizon Fitness DT680 Bedienungsanleitung

Matrix

Matrix T130 XI Bedienungsanleitung