NordicTrack NTL11806.2 Bedienungsanleitung

USER'S MANUAL

CAUT ON

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number

Decal

Model No. NTL11806.2

Serial No.

Write the serial number in the space

above for reference.

www.nordictrack.com

QUEST ONS?

If you have questions, or if parts are

damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

MPORTANT: You must note the

product model number and serial

number (see the drawing above)

before contacting us:

CALL TOLL-FREE:

1-888-825-2588

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.nordictrackservice.com

TABLE OF CONTENTS

WARNIN DECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBE IN .......................................................................6

ASSEMBLY ...............................................................................7

OPERATIONANDADJUSTMENT ............................................................14

HOWTOFOLDANDMOVETHETREADMILL ..................................................27

TROUBLESHOOTIN ......................................................................29

EXERCISE UIDELINES ...................................................................32

PARTLIST ...............................................................................34

EXPLODEDDRAWIN .....................................................................36

ORDERIN REPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY...............................................................BackCover

NordicTrack is a registered trademark of ICON IP, Inc.

This drawing shows the locations of the

warning decals. f a decal is missing or il-

legible, call the telephone number on the

front cover of this manual and request a

free replacement decal. Apply the decal

in the location shown. Note: The decals

may not be shown at actual size.

WARN NG DECAL PLACEMENT

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. t is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should be used only by per-

sons weighing 350 lbs. (159 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

14), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 14. To purchase a surge suppressor, see

your local NordicTrack dealer or call the tele-

phone number on the front cover of this man-

ual and order part number 146148, or see your

local electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. f the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

TROUBLESHOOT NG on page 29 if the tread-

mill is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 16).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

WARN NG: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. CON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

MPORTANT PRECAUT ONS

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the “off” position when the

treadmill is not in use. (See the drawing on

page 6 for the location of the reset/off circuit

breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 7, and HOW TO FOLD

AND MOVE THE TREADM LL on page 27.) You

must be able to safely lift 45 lbs. (20 kg) to

raise, lower, or move the treadmill.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

24. nspect and properly tighten all parts of the

treadmill regularly.

25. Never insert or drop any object into any

opening on the treadmill.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

27. The treadmill is intended for in-home use

only. Do not use the treadmill in any commer-

cial, rental, or institutional setting.

28. To reduce the risk of electric shock, do not re-

move the cover or the back of the television.

There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

29. Upon completion of any service or repairs to

the treadmill or the television, ask the service

technician to perform safety checks to con-

firm that the unit is in proper operating condi-

tion.

Note to CATV system installer: This reminder

is provided to call the CATV system installerʼs

attention to Article 820-40 of the NEC that pro-

vides guidelines for proper grounding and, in

particular, specifies that the cable ground

shall be connected to the grounding system

of the building, as close to the point of cable

entry as practical.

SAVE THESE NSTRUCT ONS

Power Lines

round

Clamps

To External Antenna

Terminal of Treadmill

Service

Entrance

Equipment

Power Service rounding

Electrode System (e.g.

Interior Metal Water Pipe)

Service

Entrance

Conductors

Thank you for selecting the revolutionary NordicTrack®

VIEWPOINT 3000 treadmill. The VIEWPOINT 3000

treadmill offers a selection of features designed to

make your workouts at home more enjoyable and ef-

fective. And when youʼre not exercising, the unique

treadmill can be folded up, requiring less than half the

floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEG N

Handrail

Console/Television

Fan

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Foot Rail

Power Cord

Platform Cushion

Rear Roller

Adjustment Bolts

Accessory Tray

Pulse Sensor

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

the treadmill onto its side as shown. Partially fold

the Frame (55) so that the treadmill is more sta-

ble. Do not fully fold the Frame until the

treadmill is completely assembled.

Insert an Extension Leg (97) into the indicated

bracket on the base of the Uprights (85). Make

sure that the Extension Leg is turned so the Base

Pad (81) is on the side shown. If necessary, use

a rubber mallet to align the holes in the

Extension Leg with the holes in the bracket.

Attach the Extension Leg (97) with two Extension

Leg Bolts (87), two 5/16" Star Washers (110),

and two Extension Leg Nuts (91) as shown.

Firmly tighten the Extension Leg Bolts.

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , rubber

mallet and adjustable wrench . Use the drawings below to identify the assembly hard-

ware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near

the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: f a part is

not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid

damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.

3/4" Screw (7)–6 1" Tek Screw (82)–8

Extension Leg Bolt (87)–4

5/16" Star

Washer (110)–4

Extension Leg

Nut (91)–4

3/8" Star

Washer (67)–4

Nut (20)–2

Base Cover Screw (63)–4

Console Bolt (72)–4 Latch Bolt (109)–2

Bracket

110

2. Attach two Base Pads (81) to the base of the

Uprights (85) in the indicated locations with two

1" Tek Screws (82). Note: One replacement Base

Pad may be included. Use the Base Pad to re-

place any Base Pad that becomes worn. 85

3. With the help of a second person, carefully tip

the treadmill onto its other side as shown.

Partially fold the Frame (55) so that the treadmill

is more stable. Do not fully fold the Frame

until the treadmill is completely assembled.

Insert the other Extension Leg (97) into the indi-

cated bracket on the base of the Uprights (85).

Attach the Extension Leg (97) with two Extension

Leg Bolts (87), two 5/16" Star Washers (110),

and two Extension Leg Nuts (91) as shown.

Firmly tighten the Extension Leg Bolts.

110

4. Attach two Base Pads (81) to the base of the

Uprights (85) in the indicated locations with two

1" Tek Screws (82).

With the help of a second person, carefully tip

the treadmill down so that all four Base Pads

(81) are resting on the floor and the Uprights

(85) are in the vertical position.

6. Raise the Frame (55) to the position shown.

Have a second person hold the Frame until this

step is completed.

Remove the plastic ties from the ends of the

Latch Assembly (76). Orient the Latch Assembly

so that the large barrel and the knob are in the

positions shown; make sure that all the holes are

aligned as shown in the inset drawings. Attach

the lower end of the Latch Assembly to the

bracket in the center of the Uprights (85) with a

Latch Bolt (109) and a Nut (20).

Attach the upper end of the Latch Assembly (76)

to the bracket on the Frame (55) with a Latch

Bolt (109) and a Nut (20). Note: It may be neces-

sary to move the Frame back and forth to align

the Latch Assembly with the bracket.

Lower the Frame (55) (see HOW TO LOWER

THE TREADMILL FOR USE on page 28).

Large

Barrel

109

Knob

Top

Bottom

Holes

7. Identify the Left Base Cover (88), which has

cutouts in the locations shown. Slide the Left

Base Cover onto the left Upright (85). Then, slide

the Right Base Cover (86) onto the right Upright.

Identify the Left Upright Sleeve (77) and the Right

Upright Sleeve (9). Slide the Upright Sleeves onto

the Uprights (85) as shown. 88

Left

Right

Cutouts

5. Identify the Latch Assembly (76). Make sure that

the sleeve has been slid over hole 1 and that the

latch knob is locked into hole 1. Pull on the

sleeve to make sure that it is locked into

place.

Next, make sure that the latch knob is locked

into hole 2. If it is not, pull out the tube until you

see hole 2 and then slide the tube back in until

the latch knob locks into hole 2.

Latch Knob

Sleeve

Hole 1

Hole 2

Tube

10. Attach the console assembly to the Uprights

(85) with four Console Bolts (72) and four 3/8"

Star Washers (67) (only one side is shown).

Start all four Console Bolts and then tighten

them.

Console

Assembly

9. Remove the band securing the TV Cable (112) to

the left Upright (85). Connect the TV Cable to

the cable extending from the console assembly.

Then, insert the TV Cable into the left Upright.

Next, insert the brackets on the Handrails (70)

into the left Upright (85) and the right Upright

(not shown). Make sure that no wires are

pinched. 70

Bracket

112

Console

Assembly

8. Remove the band securing the Upright Wire

Harness (73) to the right Upright (85). Have a

second person hold the console assembly near

the right Upright.

Connect the Upright Wire Harness (73) to the wire

harness on the console assembly. See the inset

drawing. The connectors should slide to-

gether easily and snap into place. If they do

not, turn one connector and try again. F THE

CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN THE POWER S TURNED ON.

Then, insert the connectors into the right Upright

(85).

Console

Assembly

Dieses Handbuch passt für folgende Modelle

Andere NordicTrack Tretmühle Handbücher

NordicTrack

NordicTrack Pro 3000 Treadmill Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack X7i Incline Trainer Bedienungsanleitung

NordicTrack

NordicTrack NTTL18991 Bedienungsanleitung

NordicTrack

NordicTrack C900 Pro Bedienungsanleitung

NordicTrack

NordicTrack T 5.3 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NCTL10840 Bedienungsanleitung

NordicTrack

NordicTrack NTL17122-INT.0 Bedienungsanleitung

NordicTrack

NordicTrack NTTL11903 Bedienungsanleitung

NordicTrack

NordicTrack NTL15008.1 Bedienungsanleitung

NordicTrack

NordicTrack Reflex 4500 Pro Treadmill Bedienungsanleitung

NordicTrack

NordicTrack T8.0 Treadmill Benutzerhandbuch

NordicTrack

NordicTrack T 13.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL12905.2 Bedienungsanleitung

NordicTrack

NordicTrack ELITE NTL16905.1 Bedienungsanleitung

NordicTrack

NordicTrack Powertread 1750 Bedienungsanleitung

NordicTrack

NordicTrack T22.0 Treadmill Einrichtungshandbuch

NordicTrack

NordicTrack NTL2495.3 Bedienungsanleitung

NordicTrack

NordicTrack NETL15900 Bedienungsanleitung

NordicTrack

NordicTrack E 3100 Systemhandbuch

NordicTrack

NordicTrack C2155 NTL07707.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL99011.2 Bedienungsanleitung

NordicTrack

NordicTrack NTL18530 Bedienungsanleitung

NordicTrack

NordicTrack C 2500 NTL09007.0 Bedienungsanleitung

NordicTrack

NordicTrack E 3200 Systemhandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch

Horizon Fitness

Horizon Fitness DT680 Bedienungsanleitung

Matrix

Matrix T130 XI Bedienungsanleitung