NordicTrack Viewpoint 3000 30704.0 Bedienungsanleitung

USER'S MANUAL

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number

Decal

Model No. 30704.0

Serial No.

Write the serial number in the space

above for reference.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if parts are

damaged or missing, PLEASE

DO NOT CONTACT THE STORE.

For assistance, contact our

Customer Service Department.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 8:00 until 17:00 EST

(excluding holidays)

OR E-MAIL US:

[email protected]

www.proform.com

Visit our website at

www.nordictrack.com

Visit our website at

www.healthrider.com

Visit our website at

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

NordicTrack is a registered trademark of ICON IP, Inc.

50%

The decals shown here have been applied in the loca-

tions shown. If a decal is missing or illegible, call the

telephone number on the front cover of this manual

and request a free replacement decal. Apply the

decal in the location shown. Note: The decals may not

be shown at actual size.

WARNING DECAL PLACEMENT

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over the age of 35 or per-

sons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and

2ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under the age of 12 and pets

away from the treadmill at all times.

8. The treadmill should not be used by persons

weighing more than 350 lbs (159 kg).

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended for

both men and women.

Always wear athletic

shoes. Never use the treadmill with bare feet,

wearing only stockings, or in sandals.

11. When connecting the power cord (see page 14),

plug the power cord into a surge suppressor

(not included) and plug the surge suppressor

into a grounded circuit capable of carrying 15

or more amps. No other appliance should be on

the same circuit. Do not use an extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 14. To purchase a surge suppressor call

the toll-free telephone number on the front

cover of this manual.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may change

speed, accelerate, or stop unexpectedly,

which may result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

TROUBLESHOOTING on page 29 if the tread-

mill is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 16).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug the

power cord, and switch the reset/off circuit

breaker to the off position when the treadmill

is not in use. (See the drawing on page 6 for

the location of the reset/off circuit breaker.)

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 7, and HOW TO FOLD

AND MOVE THE TREADMILL on page 27.) You

must be able to safely lift 45 lbs. (20 kg) to

raise, lower, or move the treadmill.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. When folding or moving the treadmill, make

sure that the frame is held securely by the pin

on the latch knob.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never insert or drop any object into any

opening.

26. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

27. The treadmill is intended for in-home use

only. Do not use the treadmill in any commer-

cial, rental, or institutional setting.

28. If an outside antenna or cable system is con-

nected, be sure that the antenna or cable sys-

tem is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National

Electrical Code, ANSI/NFPA No. 70-1984, pro-

vides information with respect to proper

grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an an-

tenna discharge unit, size of grounding con-

ductors, location of antenna discharge unit,

connection to grounding electrodes, and re-

quirements for the grounding electrode.

29. An outside antenna system should not be lo-

cated in the vicinity of overhead power lines

orother electric light or power circuits, or

where it can fall into such power lines or cir-

cuits. When installing an outside antenna sys-

tem, extreme care should be taken to keep

from touching such power lines or circuits, as

contact with them might be fatal.

30. To reduce the risk of electric shock, do not re-

move the cover or the back of the television.

There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

31. Upon completion of any service or repairs to

the treadmill or the television, ask the service

technician to perform safety checks to con-

firm that the unit is in proper operating con-

dition.

•Use No. 10 AWG (5.3mm2)copper, No. 8

AWG (8.4mm2)aluminum, No. 17 AWG

(1.0mm2)copper-clad steel or bronze wire,

or larger as a ground wire.

•Secure an antenna lead-in and ground wires

to the house with stand-off insulators

spaced from 4 to 6 feet (1.22 to 1.83 m)

apart.

•Mount an antenna discharge unit as close

as possible to where the lead-in enters the

house.

•Use a jumper wire not smaller than No. 6

AWG (13.3mm2)copper, or the equivalent

when a separate antenna-grounding elec-

trode is used. See NEC Section 810-21 (j).

Note to CATV system installer: This reminder is

provided to call the CATV system installer’s at-

tention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particu-

lar, specifies that the cable ground shall be con-

nected to the grounding system of the building,

as close to the point of cable entry as practical.

SAVE THESE INSTRUCTIONS

Power Lines

Ground

Clamps

Ground

Clamps

Ground

Clamp

Bonding

Jumper

Standoff

Insulators

Antenna

Lead-in Wire

Ground Wire

Ground

Wire Antenna

Discharge Unit

ToExternal Antenna

Terminal of Treadmill

Mast

Service

Entrance

Equipment

Power Service Grounding

Electrode System (e.g.

Interior Metal Water Pipe)

Service

Entrance

Conductors

Optional Antenna Grounding Electrode Driven 8

Feet (2.44m) Into The Earth (If Required By Local

Codes). See NEC Section 810–21 (f).

Thank you for selecting the revolutionary NordicTrack®

VIEWPOINT 3000 treadmill. The VIEWPOINT 3000

treadmill offers a selection of features designed to

make your workouts at home more enjoyable and ef-

fective. And when you’re not exercising, the unique

VIEWPOINT 3000 treadmill can be folded up, requiring

less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill.If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

Handrail

Console/Television

Fan

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Foot Rail

Power Cord

Cushioned Walking Platform

Rear Roller

Adjustment Bolts

Accessory Tray

Pulse Sensor

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

the treadmill onto its side as shown. Partially fold

the Frame (55) so that the treadmill is more sta-

ble. Do not fully fold the Frame until the

treadmill is completely assembled.

Insert an Extension Leg (97) into the indicated

bracket on the base of the Uprights (85). Make

sure that the Extension Leg is turned so the Base

Pad (81) is on the side shown. If necessary, use

arubber mallet to align the holes in the

Extension Leg with the holes in the bracket.

Attach the Extension Leg (97) with two Extension

Leg Bolts (87), two 5/16" Star Washers (110),

and two Extension Leg Nuts (91) as shown.

Firmly tighten the Extension Leg Bolts.

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Donot

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , rubber

mallet and adjustable wrench . For help identifying the assembly hardware, see the

drawings below. The number following the parentheses is the quantity needed for assembly. Note: If a part is

not in the parts bag, check to see if it has been preassembled. To avoid damaging plastic parts, do not

use power tools for assembly. Extra hardware may be included.

123)–2

1/2” Silver Screw

(48)–1

3/4” Tek Screw (58)–4

3/4" Screw (7)–6 1" Tek Screw (82)–8

Washer (96)–8

Extension Leg Bolt (87)–4

5/16" Star

Washer (110)–4

Extension Leg

Nut (91)–4

3/8" Star

Washer (67)–4

Nut (20)–2

Base Cover Screw (63)–4

Console Bolt (72)–4 Latch Bolt (109)–2

Bracket

110

2. Attach two Base Pads (81) to the base of the

Uprights (85) in the indicated locations with two

1"Tek Screws (82). Note: One replacement Base

Pad may be included. Use the Base Pad to re-

place any Base Pad that becomes worn. 85

3. With the help of a second person, carefully tip

the treadmill onto its other side as shown.

Partially fold the Frame (55) so that the treadmill

is more stable. Do not fully fold the Frame

until the treadmill is completely assembled.

Insert the other Extension Leg (97) into the indi-

cated bracket on the base of the Uprights (85).

Attach the Extension Leg (97) with two Extension

Leg Bolts (87), two 5/16" Star Washers (110),

and two Extension Leg Nuts (91) as shown.

Firmly tighten the Extension Leg Bolts.

110

Bracket

4. Attach two Base Pads (81) to the base of the

Uprights (85) in the indicated locations with two

1" Tek Screws (82).

With the help of a second person, carefully tip

the treadmill down so that all four Base Pads

(81) are resting on the floor and the Uprights

(85) are in the vertical position.

6. Raise the Frame (55) to the position shown.

Have a second person hold the Frame until this

step is completed.

Remove the plastic ties from the ends of the

Latch Assembly (76). Orient the Latch Assembly

so that the large barrel and the knob are in the

positions shown; make sure that all the holes are

aligned as shown in the inset drawings. Attach

the lower end of the Latch Assembly to the

bracket in the center of the Uprights (85) with a

Latch Bolt (109) and a Nut (20).

Attach the upper end of the Latch Assembly (76)

to the bracket on the Frame (55) with a Latch

Bolt (109) and a Nut (20). Note: It may be neces-

sary to move the Frame back and forth to align

the Latch Assembly with the bracket.

Lower the Frame (55) (see HOW TO LOWER

THE TREADMILL FOR USE on page 28).

Large

Barrel

109

Knob

Top

Bottom

Holes

7. Identify the Left Base Cover (88), which has

cutouts in the locations shown. Slide the Left

Base Cover onto the left Upright (85). Then, slide

the Right Base Cover (86) onto the right Upright.

Identify the Left Upright Sleeve (77) and the Right

Upright Sleeve (9). Slide the Upright Sleeves onto

the Uprights (85) as shown. 88

Left

Right

Cutouts

5. Identify the Latch Assembly (76). Make sure that

the sleeve has been slid over hole 1 and that the

latch knob is locked into hole 1. Pull on the

sleeve to make sure it is locked into place.

Next, make sure that the latch knob is locked

into hole 2. If it is not, pull out the tube until you

see hole 2 and then slide the tube back in until

the latch knob locks into hole 2.

Latch Knob

Sleeve

Hole 1

Hole 2

Tube

10. Attach the console assembly to the Uprights

(85) with four Console Bolts (72) and four 3/8"

Star Washers (67) (only one side is shown).

Start all four Console Bolts and then tighten

them.

Console

Assembly

9. Remove the band securing the TV Cable (112) to

the left Upright (85). Connect the TV Cable to

the cable extending from the console assembly.

Then, insert the TV Cable into the left Upright.

Next, insert the brackets on the Handrails (70)

into the left Upright (85) and the right Upright

(not shown). Make sure that no wires are

pinched. 70

Bracket

112

Console

Assembly

8. Remove the band securing the Upright Wire

Harness (73) to the right Upright (85). Have a

second person hold the console assembly near

the right Upright.

Connect the Upright Wire Harness (73) to the wire

harness on the console assembly. Make sure to

connect the connectors properly (see the

inset drawing). The connectors should slide

together easily and snap into place. If they do

not, turn one connector and try again. IF THE

CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN THE POWER IS TURNED ON.

Then, insert the connectors into the right Upright

(85).

Console

Assembly

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Tretmühle Handbücher

NordicTrack

NordicTrack NTL01009.3 Bedienungsanleitung

NordicTrack

NordicTrack T20.0 Treadmill Kurzanleitung

NordicTrack

NordicTrack APEX 6500 NTL18907.0 Bedienungsanleitung

NordicTrack

NordicTrack E 4400 Bedienungsanleitung

NordicTrack

NordicTrack E 3800 Systemhandbuch

NordicTrack

NordicTrack T5 Lv Treadmill Konfigurationshandbuch

NordicTrack

NordicTrack Apex 5100 Bedienungsanleitung

NordicTrack

NordicTrack A2350 NTL07007.3 Bedienungsanleitung

NordicTrack

NordicTrack PowerTread PT6.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL08009.4 Bedienungsanleitung

NordicTrack

NordicTrack T8.0 Treadmill Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack A2550 NTL09107.0 Bedienungsanleitung

NordicTrack

NordicTrack T 9.2 Treadmill Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack T 13.0 Treadmill Benutzerhandbuch

NordicTrack

NordicTrack T 7.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack ELITE NTL16905.1 Bedienungsanleitung

NordicTrack

NordicTrack NTTL09993 Bedienungsanleitung

NordicTrack

NordicTrack APEX 6500 30705.0 Bedienungsanleitung

NordicTrack

NordicTrack C900 Pro Bedienungsanleitung

NordicTrack

NordicTrack E 3100 Benutzerhandbuch

NordicTrack

NordicTrack T 6.1 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack T15.0 Treadmill Kurzanleitung

NordicTrack

NordicTrack NTTL18900 Bedienungsanleitung

NordicTrack

NordicTrack 17.0 Treadmill Systemhandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch

Horizon Fitness

Horizon Fitness DT680 Bedienungsanleitung

Matrix

Matrix T130 XI Bedienungsanleitung