Nortel Enterprise Edge M7208N Stücklistenhandbuch

P0908518 Issue 02

Enterprise Edge

M7208N

User Card

Page 1 Enterprise Edge M7208N User Card

Your Enterprise Edge M7208N telephone

Using Button

Inquiry Check what is programmed on your memory buttons.

1. Release all calls or lines with dial tone.

2. Press ƒ•‚.

3. Press the button(s) that you want to check.

4. Read the display.

5. Press ƒwhen finished.

Adjusting display

contrast 1. Press ƒ•‡.

2. Press ⁄to ·on the dial pad for the contrast level you want; the

higher the number the higher the contrast level.

Selecting a ring

type and volume

level

1. Press ƒ•ﬂ.

2. Press ⁄, ¤, ‹or ›to hear the different ring types.

3. While the telephone is ringing, press √to adjust the

volume level.

4. Press ƒto store the ring.

Adjusting the

handset or

telephone

speaker volume

1. Press √when using the handset or the speaker.

Display

shows the time, date, call information, and guides you.

Indicators

appear beside lines and features.

Feature button

starts or ends a feature.

Release button

cancels active calls.

Hold button

Dial pad

Volume control

Memory and line buttons

are buttons with indicators for one

touch dialing, feature operation

or line access.

Page 2 Enterprise Edge M7208N User Card

Making and answering calls

Answering calls Answering calls using the handset

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Lift the handset.

Press the button beside the flashing ºbefore lifting the handset.

Answering calls using Handsfree

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Press ©.

Making calls Depending upon the dialling mode programmed on your telephone, you may

have to lift the handset before making a call.

¬External calls using numbered line buttons

1. If you do not have an external Prime line, press a line button.

2. Dial your call.

∆External calls using Intercom buttons

1. Lift the handset.

2. If ºappears beside an Intercombutton, enter a linepool access code.

Press an Intercom button without º, then enter a line pool access code.

3. When you hear external dial tone, dial your call.

Internal calls using Intercom buttons

1. If you do not have an internal Prime line, press ∆.

2. Dial your call.

Note: Line pool access codes and extension numbers are supplied by your

System Administrator.

Making calls using Handsfree

1. Press ©instead of lifting the handset.

˙Holding Calls

1. Press ˙.The ºflashes beside the line on hold.

2. Press the line button with the flashing ºto return to the call.

Automatic hold

Calls are put on hold automatically when you switch from one line to another.

Exclusive hold

Use Exclusive Hold (ƒ˙) to keep a call on hold so that it can be

retrieved only at your telephone.

©System Administrator can program Handsfree for your telephone.

Switching between Handsfree and handset

1. Press ©and replace the handset to switch to Handsfree.

2. Pick up the handset to switch back.

Using Mute

1. Press ©to turn the microphone OFF.

2. Press ©again to turn the microphone ON.

Page 3 Enterprise Edge M7208N User Card

Programming memory buttons

Remember: Press ƒ•‚ to check a memory or line button.

Programming

memory buttons External Autodial

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•⁄.

3. Press a memory button.

4. Dial the external number.

5. Press ˙to store the number.

6. Label your new button.

Internal Autodial

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•¤.

3. Press a memory button.

4. Dial the extension number.

5. Label your new button.

Features

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•‹.

3. Press a memory button.

4. Press ƒand the feature code.

5. Label your new button.

Erasing memory buttons

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•⁄.

3. Press the memory button you want to erase.

4. Press ˙to erase the button.

About memory

buttons

Memory buttons are the buttons

with indicators other than line or

Handsfree buttons. Memory

buttonsstoretelephonenumbers

or feature codes to give you one-

touch dialling or feature

activation. You can change what

a memory button does by just

programming it with a new

number or feature. You cannot

program a line or Handsfree

button.

Page 4 Enterprise Edge M7208N User Card

Setting up the telephone

Notice These telephones now conform to the latest standards in relation to the

positioning of Q and Z on the number buttons. The Q appears on button

number 7 and the Z appears on button number 9.

Connecting the cords ATTENTION Before attempting to

carry out any work on the telephone,

ensure that the line cord is unplugged

from the wall socket.

To remove any of the cords, squeeze

the release latch on the plug and gently

pull the plug from the socket.

Connect the handset cord to the jack

labelled with the telephone icon and

route the cord as shown.

If you are using a headset, route the

cord along the channel in the base and

connect the cord to the telephone jack

that is marked with the headset icon.

Route the line cord through the stand

and connect the cord to the telephone

jack that is marked with the jack icon.

Attach the stand using either pair of

slots; to raise the back of the telephone

to its highest position, use these slots.

Once the above work is complete, plug

the line cord back into its wall socket.

Press here to

remove the stand.

Press here firmly

until it clicks, to

attach the stand.

Page 5 Enterprise Edge M7208N User Card

12 cm

Setting up the telephone

Mounting the

telephone on

the wall

Page 5 Enterprise Edge M7208N User Card P0908518 Issue 02

Inhaltsverzeichnis

Andere Nortel Telefon Handbücher

Nortel

Nortel Meridian Meridian 1 Bedienungsanleitung

Nortel

Nortel Norstar T7316E Bedienungsanleitung

Nortel

Nortel M760 Bedienungsanleitung

Nortel

Nortel T7208 Stücklistenhandbuch

Nortel

Nortel M 7000 Stücklistenhandbuch

Nortel

Nortel 7430 Kurzanleitung

Nortel

Nortel Meridian M3904 Bedienungsanleitung

Nortel

Nortel CallPilot 150 Bedienungsanleitung

Nortel

Nortel P0609347 02 Bedienungsanleitung

Nortel

Nortel i2004 Bedienungsanleitung

Nortel

Nortel 3904 Bedienungsanleitung

Nortel

Nortel N0060609 Bedienungsanleitung

Nortel

Nortel M5216 Bedienungsanleitung

Nortel

Nortel Industrial Handset Bedienungsanleitung

Nortel

Nortel Norstar Bedienungsanleitung

Nortel

Nortel DMS-100 Series Bedienungsanleitung

Nortel

Nortel Meridian Meridian 1 Bedienungsanleitung

Nortel

Nortel Regular Telephone Bedienungsanleitung

Nortel

Nortel Enterprise Edge ATA 2 Bedienungsanleitung

Nortel

Nortel Meridian M3902 Bedienungsanleitung

Nortel

Nortel T7100 Stücklistenhandbuch

Nortel

Nortel Meridian M5008 Bedienungsanleitung

Nortel

Nortel Compact DR5 Stücklistenhandbuch

Nortel

Nortel 3903 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung