Nortel M7100N Stücklistenhandbuch

P0908517 Issue 02

Enterprise Edge

M7100N

User Card

Page 1 Enterprise Edge M7100N User Card

Your Enterprise Edge M7100N telephone

Using Button

Inquiry Check what is programmed on your memory button.

1. Release all calls or lines with dial tone.

2. Press ƒ•‚.

3. Press the button that you want to check.

4. Read the display.

5. Press ƒwhen finished.

Adjusting the

display contrast 1. Press ƒ•‡.

2. Press⁄to·forthelevelyou want;thehigher thenumberthehigher

the level.

Selecting a ring

type and volume

level

1. Press ƒ•ﬂ.

2. Press ⁄, ¤, ‹or ›to hear the different ring types.

3. While the telephone is ringing, press √to adjust the

volume level.

4. Press ƒto store the ring.

Adjusting the

handset or

telephone

speaker volume

1. Press √when using the handset or the speaker.

Display

shows the time, date, and call information; guides you while

using features; tilts for easy viewing

Feature button

starts or ends a feature

Dial pad

Volume control

Memory button

is programmable to store a

feature or to automatically

dial an internal or external

number.

Hold button

Release button

cancels active calls

Page 2 Enterprise Edge M7100N User Card

Making and answering calls

Answering calls 1. When your telephone rings, lift your handset.

You are immediately connected to the call.

Making external

calls Depending upon the dialling mode programmed for your telephone, you

may be able to dial your call before lifting your handset.

1. Pick up the handset.

2. Dial ‚(your system’s exchange line access code or a line pool

access code).

3. Dial the external telephone number.

Making internal

calls 1. Pick up the handset.

2. Dial the internal number.

Note: Extension numbers and the exchange line access code are

supplied by your System Administrator.

Making or

answering a

second call

The M7100N telephone allows you to have two calls active at the same

time.

You can switch between calls using ˙.

To answer a second call while on another call

1. Press ˙to put the first call on hold.

The second call automatically comes onto the line.

To hold a call and make a second call

1. Press ˙to put the first call on hold.

2. Dial the telephone number for the second call.

To return to the first call

1. Press ˙again to return to the first call on hold.

The second call is automatically put on hold.

˙To hold a call

1. Press ˙.

2. Press ˙again to return to the call on hold.

Check the display for confirmation or additional information.

Note: If you have difficulty selecting a line on your M7100N telephone,

ask your System Administrator to check your telephone's

programming. Your telephone must be assigned to use an

exchange line or line pool.

Page 3 Enterprise Edge M7100N User Card

Programming the memory button

Remember: Press ƒ•‚ to check a memory or line button.

Programming the

memory button External Autodial

1. If you are on a call or a line with dial tone, press ˙or®.

2. Press ƒ•⁄.

3. Dial the external number.

4. Press ˙to store the number.

5. Label your new button.

Internal Autodial

1. If you are on a call or a line with dial tone, press ˙or®.

2. Press ƒ•¤.

3. Dial the extension number.

4. Label your new button.

Features

1. If you are on a call or a line with dial tone, press ˙or ®.

2. Press ƒ•‹.

3. Press ƒand the feature code.

4. Label your new button.

Erasing the memory button

1. If you are on a call or a line with dial tone, press ˙or®.

2. Press ƒ•⁄.

3. Press ˙to erase the button.

Notice These telephones now conform to the latest standards in relation to the

positioning of Q and Z on the number buttons. The Q appears on button

number 7 and the Z appears on button number 9.

About the

memory button The memory button can store a

telephone number or feature

code to give you one touch

dialling or feature activation. You

can change the memory button

by programming it with a new

number or feature code.

Memory button

Page 3 Enterprise Edge M7100N User Card

Page 4 Enterprise Edge M7100N User Card

Setting up the telephone

Connecting the cords ATTENTION Before attempting to carry

out any work on the telephone, ensure

that the line cord is unplugged from the

wall socket.

To remove any of the cords, squeeze

the release latchon the plug and gently

pull the plug from the socket.

Connect the handset cord to the jack

labelled with the telephone icon and

route the cord as shown.

Route the line cord through the stand

and connect the cord to the telephone

jack that is marked with the jack icon.

Attach the stand using either pair of

slots; to raise the back of the telephone

to its highest position, use these slots.

Once the above work is complete, plug

the line cord back into its wall socket.

Press here to

remove the stand.

Press here firmly

until it clicks, to

attach the stand.

Page 5 Enterprise Edge M7100N User Card

Setting up the telephone

Mounting the

telephone on

the wall

12 cm

Page 5 Enterprise Edge M7100N User Card P0908517Issue02

Andere Handbücher für M7100N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nortel Telefon Handbücher

Nortel

Nortel BCM50 Kurzanleitung

Nortel

Nortel 2001 Referenzhandbuch

Nortel

Nortel Meridian SL-100 M3905 Bedienungsanleitung

Nortel

Nortel M3110 Bedienungsanleitung

Nortel

Nortel BCM50 3.0 Bedienungsanleitung

Nortel

Nortel Norstar Bedienungsanleitung

Nortel

Nortel 3903 Bedienungsanleitung

Nortel

Nortel Enterprise Edge Feature Programming... Bedienungsanleitung

Nortel

Nortel T Series Bedienungsanleitung

Nortel

Nortel Norstar T7316E Stücklistenhandbuch

Nortel

Nortel Norstar Plus Bedienungsanleitung

Nortel

Nortel Business Series Terminal T7000 Stücklistenhandbuch

Nortel

Nortel M3905 Bedienungsanleitung

Nortel

Nortel NorStar M7310 Bedienungsanleitung

Nortel

Nortel Meridian M3902 Bedienungsanleitung

Nortel

Nortel Telephone Bedienungsanleitung

Nortel

Nortel NorStar M7310 Bedienungsanleitung

Nortel

Nortel Nortel IP Phone 1120E Bedienungsanleitung

Nortel

Nortel T7316 Stücklistenhandbuch

Nortel

Nortel CallPilot 100 Einrichtungshandbuch

Nortel

Nortel M 7000 Stücklistenhandbuch

Nortel

Nortel Meridian M5312 Bedienungsanleitung

Nortel

Nortel M220E Bedienungsanleitung

Nortel

Nortel NP-4046-100 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung