Nortel NorStar M7310 Bedienungsanleitung

P0908513 Issue 01

Enterprise Edge

M7310

User Card

Page 1 Enterprise Edge M7310 User Card

Your Enterprise Edge M7310 Telephone

Using Button

Inquiry Check what is programmed on your memory buttons.

1. Release all calls or lines with dial tone.

2. Press ƒ•‚.

3. Press the button(s) that you want to check and read the display.

4. Press ƒwhen finished.

Adjusting display

contrast 1. Press ƒ•‡.

2. Press UP or DOWN for the level you want.

3. Press OK when finished.

Selecting a ring

type and volume

level

1. Press ƒ•ﬂ.

2. Press ⁄, ¤, ‹, ›, or˚NEXTto hear the different ring types.

3. While the telephone is ringing, press √to adjust the

volume level.

4. Press OK˚to store the volume level and ring.

Using display

buttons Three display buttons appear directly below

the display. When they are active, these

buttons are labelled in capital letters on the

bottom line of the display.In Enterprise Edge

documents, display buttons are shown as

underlined, capital letters: for example, OK.

Display

shows the time, date, call information, and guides you.

Indicators

appear beside lines and features.

Feature button

starts or ends a feature.

Release button

cancels active calls.

Hold button

Dial pad

Volume control

Memory and line buttons

are buttons with indicators for one

touch dialing, feature operation

or line access.

The lower line of the display is reserved for display button instructions.

Display buttons

Dual-memory buttons

store any two features and/or autodial numbers.

Shift button

For using the top function of a dual-memory button.

Display button

Show line:_

COPY

Display message

Display button message

Page 2 Enterprise Edge M7310 User Card

Making and answering calls

Answering calls Answering calls using the handset

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Lift the handset.

Press the button beside the flashing ºbefore lifting the handset.

Answering calls using Handsfree

When your telephone rings, or ºflashes beside an Intercom or line button:

1. Press ©.

Making calls Depending upon the dialing mode programmed on your telephone, you may

have to lift the handset before making a call.

¬External calls using numbered line buttons

1. If you do not have an external Prime line, press a line button.

2. Dial your call.

∆External calls using Intercom buttons

1. Lift the handset.

2. If ºappears beside an Intercom button, enter a line pool access code.

Press an Intercom button without º, then enter a line pool access code.

3. When you hear external dial tone, dial your call.

Internal calls using Intercom buttons

1. If you do not have an internal Prime line, press ∆.

2. Dial your call.

Note: Line pool access codes and extension numbers are supplied by

your System Administrator.

Making calls using Handsfree

1. Press © instead of lifting the handset.

˙Holding Calls

1. Press ˙.The ºflashes beside the line on hold.

2. Press the line button with the flashing ºto return to the call.

Automatic hold

Calls are put on hold automatically when you switch from one line to another.

Exclusive hold

Use Exclusive Hold (ƒ˙) to keep a call on hold so that it

can be retrieved only at your telephone.

©System Administrator can program Handsfree for your telephone.

Switching between Handsfree and handset

1. Press ©and replace the handset to switch to Handsfree.

2. Pick up the handset to switch back.

Using Mute

1. Press ©microphone OFF.

2. Press ©again to turn the microphone ON.

Page 3 Enterprise Edge M7310 User Card

Remember: Press ƒ•‚ to check a memory or line button.

Notice These telephones now conform to the latest standards in relation to the

positioning of Q and Z on the number keys. The Q appears on key number 7

and the Z appears on key number 9.

Programming

memory buttons External Autodial

1. If youare on a calloranopen line

with dial tone, press

˙or ®

2. Press ƒ•⁄.

3. Press a memory button.

4. Dial the external number.

5. Press OK to store the number.

6. Label your new button.

Internal Autodial

1. If you are on a call or an open line with

dial tone, press

˙or ®.

2. Press ƒ•¤.

3. Press a memory button.

4. Dial the station number.

5. Label your new button.

Features

1. If youare on a calloranopen line

with dial tone, press

˙or ®.

2. Press ƒ•‹.

3. Press a memory button.

4. Press ƒand the

feature code.

5. Label your new button.

Erasing memory buttons

1. If you are on a call or an open line with

dial tone, press

˙or ®.

2. Press ƒ•⁄.

3. Press the memory button you want to

erase.

4. Press OK to erase the button.

About memory buttons

Programming memory buttons

Memory buttons store telephone

numbers or feature codes to give

you one-touch dialling or

feature activation.

To use the top function, press

the shift button, then press the

dual-memory button.

There are two types of memory

buttons: single-memory and

dual-memory.

Dual-memory buttons:

To use the bottom function,

press the dual-memory button.

Single-memory buttons:

Single-memory buttons are the

buttons with indicators other

than line or Handsfree buttons.

Page 4 Enterprise Edge M7310 User Card

Setting up the telephone

Connecting the cords ATTENTION Before attempting to

carry out any work on the telephone,

ensure that the line cord is unplugged

from the wall socket.

To remove any of the cords, squeeze

the release latch on theplugand gently

pull the plug from the socket.

Connect the handset cord to the jack

labelled with the telephone icon and

route the cord as shown.

If you are using a headset, route the

cord along the channel in the base and

connect the cord to the telephone jack

that is marked with the headset icon.

Route the line cord through the stand

and connect the cord to the telephone

jack that is marked with the jack icon.

Attach the stand using either pair of

slots; to raise the back of the telephone

to its highest position, use these slots.

Once the above work is complete, plug

the line cord back into its wall socket.

Connect to jack

from distribution block

Connect to receiver

Page 5 Enterprise Edge M7310 User Card P0908513 Issue 01

Setting up the telephone

Mounting the

telephone on

the wall

Andere Handbücher für NorStar M7310

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nortel Telefon Handbücher

Nortel

Nortel M3905 Bedienungsanleitung

Nortel

Nortel M7100N Bedienungsanleitung

Nortel

Nortel 3904 Bedienungsanleitung

Nortel

Nortel Nortel IP Phone 1120E Bedienungsanleitung

Nortel

Nortel M2016S Secure Set Bedienungsanleitung

Nortel

Nortel Norstar ICS Technisches Datenblatt

Nortel

Nortel 1987 Bedienungsanleitung

Nortel

Nortel T Series Bedienungsanleitung

Nortel

Nortel Meridian Meridian 1 Bedienungsanleitung

Nortel

Nortel M3110 Bedienungsanleitung

Nortel

Nortel i2004 Bedienungsanleitung

Nortel

Nortel i2004 Bedienungsanleitung

Nortel

Nortel T7316 Stücklistenhandbuch

Nortel

Nortel M 7000 Stücklistenhandbuch

Nortel

Nortel 3902 Bedienungsanleitung

Nortel

Nortel Maestro 1500CW Bedienungsanleitung

Nortel

Nortel Compact DR5 Stücklistenhandbuch

Nortel

Nortel T7316 Stücklistenhandbuch

Nortel

Nortel DMS-100 Series Bedienungsanleitung

Nortel

Nortel Meridian Meridian 1 Bedienungsanleitung

Nortel

Nortel N0060609 Bedienungsanleitung

Nortel

Nortel M5316 Bedienungsanleitung

Nortel

Nortel Enterprise Edge Feature Programming... Bedienungsanleitung

Nortel

Nortel M7100N Stücklistenhandbuch

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung