Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 Bedienungsanleitung

Novell Business Continuity Clustering 1.1 SP1 Readme 1

Novell®

Novell Business Continuity

Clustering 1.1 SP1 Readme

September 21, 2010

This Readme applies to Novell®Business Continuity Clustering (BCC) 1.1 Support Pack (SP) 1 for

Novell Open Enterprise Server (OES) 1 SP2 Linux and for NetWare 6.5 SP5 or SP6.

1 Downloading BCC 1.1 SP1

To download BCC 1.1 SP1, go to The Novell Business Continuity Clustering download site (http://

download.novell.com/Download?buildid=bdkmSxRgKVk~).

2 Documentation

For information on Business Continuity Clustering 1.1 SP1 for OES 1 SP2 Linux and for NetWare

6.5 SP5/SP6, see the BCC Documentation Web site (http://www.novell.com/documentation/bcc/).

3 Installation Issues

Section 3.1, “Pre-Installation Patches for Linux,” on page 1

Section 3.2, “Pre-Installation Patches for NetWare,” on page 1

Section 3.3, “Update the iManager Cluster Plug-in,” on page 2

Section 3.4, “Software Dependency Conflicts on Linux,” on page 4

Section 3.5, “Drive Mappings to NetWare Mapped Volumes Missing After Install,” on page 4

Section 3.6, “Limited Support for Mixed NetWare and Linux Clusters,” on page 4

Section 3.7, “Do Not Mix IDM Versions,” on page 5

3.1 Pre-Installation Patches for Linux

The latest OES Linux patches from the patch channel are required prior to installing BCC 1.1. For

instructions on updating OES Linux with the latest patches, see Patching an OES Linux Server

(http://www.novell.com/documentation/oes/install_linux/data/bxlu3xc.html) in the OES Linux

Installation Guide.

For more information on applying patches using the YaST online update or Red Carpet, see the

Novell Linux Registration and Updates page (http://support.novell.com/linux/registration/).

3.2 Pre-Installation Patches for NetWare

The following OES NetWare patches are required prior to installing BCC1.1:

The NetWare 6.5 post Support Pack 5 Update. See OES SP2, NW6.5 SP5 Update 1: TID #

2974185 (http://support.novell.com/docs/Readmes/InfoDocument/2974185.html).

2Novell Business Continuity Clustering 1.1 SP1 Readme

This patch is required only for NetWare 6.5 Support Pack 5. If you have upgraded to NetWare

6.5 Support Pack 6, this patch is not required.

The nwcs18pt3 or later cluster patch. See Netware Cluster Services Field Test: TID # 2974985

(http://support.novell.com/cgi-bin/search/searchtid.cgi?/2974985.htm).

This patch can be applied only to NetWare 6.5 Support Pack 5. If you have upgraded to

NetWare 6.5 Support Pack 6, this patch is not required.

LIBC (libcsp6X or later) See LIBC Update NetWare 6.5 SP6 9.00.05: TID # 5003460 (https://

innerweb.novell.com/docs/iReadmes/InfoDocument/patchbuilder/readme_5003460.html).

OpenWBEM. See CIMOM Update for NetWare 6.5 SP6: TID # 5004180 (http://

support.novell.com/docs/Readmes/InfoDocument/patchbuilder/readme_5004180.html).

3.3 Update the iManager Cluster Plug-in

You must remove the existing iManager plug-in for Novell Cluster Services and replace it with the

plug-in that is on the Novell download Web site (http://download.novell.com/). Updating the

iManager plug-in for cluster services resolves sporadic iManager problems specific to Novell

Cluster Services.

To remove the old plug-in, start iManager and then perform the following steps:

1Click the Configure button, then click Module Installation.

2Click Installed Novell Plug-in Modules, then select Cluster Services.

IMPORTANT: If you have installed the iManager plug-in for Archive and Versioning

Services, you must remove it. If you have installed the Storage Management plug-in

(

nssmgmt.npm

) and/or the Shared Storage plug-in (

storagemgmt.npm

), you must remove and

resinstall them.

Select these additional plug-ins to remove them.

3Click Uninstall to remove the selected plug-ins.

4Sometimes the plug-ins may not be correctly removed. To ensure that the plug-ins are removed,

complete the following steps for iManager on either NetWare or Linux as indicated:

4a Go to the

sys:\tomcat\4\webapps\nps\portal\modules

directory on NetWare, or

the

/var/opt/novell/tomcat4/webapps/nps/portal/modules

directory on Linux,

and ensure the following folders are no longer present. If the folders are present, delete

them.



ark



nss



ncs



storage

4b Go to the

sys:\tomcat\4\webapps\nps\WEB-INF

directory on NetWare, or the /

var/

opt/novell/tomcat4/webapps/nps/WEB-INF

directory on Linux, and ensure the

following files are no longer present. If the files are present, delete them.



ark.tld



ncs.tld



nss.tld

Novell Business Continuity Clustering 1.1 SP1 Readme 3

4c Go to the sys:\tomcat\4\webapps\nps\WEB-INF\modules directory on NetWare, or the /

var/opt/novell/tomcat4/webapps/nps/WEB-INF/modules directory on Linux, and ensure

the following folders are no longer present. If the files are present, delete them.



ark



ncs



nsmgmt



storage

4d Go to the

sys:\tomcat\4\webapps\nps\WEB-INF\lib

directory on NetWare, or the

var/opt/novell/tomcat4/webapps/nps/WEB-INF/lib

directory on Linux, and

ensure that the following folders are no longer present. If the folders are present, delete

them. (The * character used here is a wildcard character used to represent additional

characters in the filename, and is not actually part of the filename.)



ark*.jar



ncs*.jar



nss*.jar

4e Go to the

sys:\tomcat\4\webapps\nps\packages

directory on NetWare, or the

/var/

opt/novell/tomcat4/webapps/nps/packages

directory on Linux, and ensure the

following files are no longer present. If the files are present, delete them.



arkmgmt.npm



nssmgmt.npm



ncsmgmt.npm



storagemgmt.npm

4f Go to the

SYS:\tomcat\4\work\STANDALONE\LOCALHOST\NPS\portal\modules

directory on NetWare, or the

/var/opt/novell/tomcat4/work/Standalone/

localhost/nps/portal/modules

directory on Linux, and ensure that the following

folders are no longer present. If the folders are present, delete them.



ark



nss



ncs



storage

4g Go to the

sys:\tomcat\4\webapps\nps\UninstallerData

directory on NetWare, or

the

/var/opt/novell/tomcat4/webapps/nps/UninstallerData

directory on Linux,

and ensure that the following folders are no longer present. If the folders are present,

delete them.



Uninstall_nssmgmt



Uninstall_ncsmgmt



Uninstall_arkmgmt



Uninstall_storagemgmt



Uninstall_nssmgmtjar



Uninstall_ncsmgmtjar



Uninstall_arkmgmtjar



Uninstall_storagemgmtjar

4Novell Business Continuity Clustering 1.1 SP1 Readme

To install the new plug-ins:

1Go to the iManager plug-in download site (http://download.novell.com/

index.jsp?product_id=&search=Search&build_type=SDBuildBean&families=2611&version=

&date_range=&keywords=&x=32&y=7) and download the iManager plug-ins to a directory.

2In iManager, click the Configure button, select Module Installation, select Available Novell

Plug-in Modules, then click New.

3Browse to the directory where you downloaded the plug-ins and add the storage management

(

storagemgmt.npm

) plug-in by selecting it, clicking Open, and then clicking OK.

4Repeat Step 3 to add the NSS plug-in (

nssmgmt.npm

) and the Novell Cluster Services plug-ins

(

ncsmgmt.npm

5Select the Storage Management plug-in (

storagemgmt.npm

), click Install, and then click

Close on the message screen with the text informing you to restart your Web server.

6Click Available Plug-ins and then repeat Step 5 for both the NSS plug-in (

nssmgmt.npm

) and

the Novell Cluster Services plug-in (

ncsmgmt.npm

The plug-ins must be installed in the following order:

storagemgmt.npm

nssmgmt.npm

ncsmgmt.npm

7Restart the Apache Web server.

One way to do this is by restarting your server.

3.4 Software Dependency Conflicts on Linux

During the installation and uninstallation processes, a message might appear stating that requisite

software is not installed and asking you if you want to resolve conflicts. Click Yes, and then on the

Dependency Conflict screen, select Do Not Delete novell-cluster-services-cli, click OK -- Try Again,

and then Accept.

You might also encounter software dependency conflicts unrelated to Novell Business Continuity

Clustering or Novell Cluster ServicesTM software. You should resolve these conflicts on a case-by-

case basis.

3.5 Drive Mappings to NetWare Mapped Volumes Missing After

Install

The drive mappings to all NetWare mapped volumes are removed if you enter invalid credentials for

administrator/password in the BCC install wizard.

3.6 Limited Support for Mixed NetWare and Linux Clusters

Clusters containing NetWare and Linux* nodes are only supported in a BCC as a temporary means

to convert a cluster from NetWare to Linux. Part of the temporary conversion state includes a

restriction that only one mixed cluster can exist in your BCC. For example, Cluster A can have both

NetWare and Linux nodes, but Cluster B cannot. All nodes in Cluster B must be either NetWare or

Linux.

Novell Business Continuity Clustering 1.1 SP1 Readme 5

The same restrictions that apply to migrating or failing over resources between nodes within a single

cluster also apply to migrating or failing over resources between clusters in a mixed BCC. You can

only migrate or fail over NSS pool/volume resources between clusters in a mixed BCC. See

Converting a NetWare Cluster to Linux (http://www.novell.com/documentation/oes/

cluster_admin_lx/data/bu1b1x8.html) in the OES Novell Cluster Services 1.8.2 Administration

Guide for Linux

3.7 Do Not Mix IDM Versions

Do not install IDM 3.x management utilities with the IDM 2.x engine. If you do, the IDM Driver for

eDirectory will be converted to version 3.x, and the IDM 2.x engine will no longer be able to get the

driver information.

4 Known Issues

Section 4.1, “Existing Clusters Could Have Conflicting VOLIDs,” on page 5

Section 4.2, “Refresh of iManager Views Delayed,” on page 5

Section 4.3, “NSS Pool Failover Times,” on page 6

Section 4.4, “Migrating Volume Trustee Assignments,” on page 6

Section 4.5, “Renamed BCC Volume Names Don't Replicate to Other Trees,” on page 6

Section 4.6, “Using iManager to Set Credentials on Linux Not Functional,” on page 6

Section 4.7, “Problems Saving SAN Management Scripts,” on page 7

Section 4.8, “Resource Goes Offline After Migration,” on page 7

Section 4.9, “Cluster and Peer Clusters Don’t Appear in Connections List After Upgrade,” on

page 7

Section 4.10, “Creating a New Cluster Resource Requires IDM Cluster Node to Be Up,” on

page 7

Section 4.11, “Disabling BCC for a Cluster Disables BCC for Cluster Resources,” on page 7

Section 4.12, “Cluster Restart Command Not Functional on NetWare,” on page 7

4.1 Existing Clusters Could Have Conflicting VOLIDs

When existing clusters are configured and enabled within the same business continuity cluster, the

volume IDs (VOLIDs) for the existing shared volumes might also share the same VOLIDs. To

correct this problem, manually edit the load script for each volume that has been enabled for

business continuity and change the VOLIDs to unique values for each volume in the business

continuity cluster.

4.2 Refresh of iManager Views Delayed

When you enable a cluster resource for business continuity, that resource might take up to 30

seconds to appear as enabled for business continuity in iManager. After Business Continuity

Clustering refreshes its status information, the resource will appear as enabled.

6Novell Business Continuity Clustering 1.1 SP1 Readme

4.3 NSS Pool Failover Times

Due to MSAP (Multiple Server Activation Protocol), the NSS pools on a cluster might take up to 30

seconds per pool to fail over from a cluster to one node in another cluster. If you have several pools

in a cluster, the failover process will be faster if those pools fail over to multiple nodes (fan-out

failover) rather than to just a single node.

4.4 Migrating Volume Trustee Assignments

If you are migrating a pool to a cluster in another tree and you want to maintain that pool's volume

trustee assignments, you must migrate the pool to a server with an eDirectoryTM replica that holds all

objects that have trustee assignments on any of the volumes in the pool. After migrating the pool to

a server with an eDirectory replica, enter the following console command on that server for each

volume in the pool:

NSS/ResetObjectIDStore=volumename

This command updates all volume trustee assignments and should be run at night, on a weekend, or

during a period of low network and disk utilization. Trustee assignments will not appear in

management utilities until you run the command.

If you migrate the pool to a server in another tree without an eDirectory replica, within 90 days you

must migrate that pool to a server with an eDirectory replica and then run the command for each

volume.

Trustee assignments are always enforced, but after migrating a volume from a cluster in one tree to a

cluster in another tree, volume trustee assignments might not be displayed correctly in

ConsoleOne®, Novell Remote Manager (NRM), or on an NCPTM client. This issue exists when the

migrated pool is active on a nonreplica server node.

The trustees are in place and correct. Users with trustee assignments from the original tree can map

drives and access data with no issues. If a pool is migrated to a server node that contains a replica,

the trustee assignments are presented correctly.

See Migrating Volume Trustee Assignments above for more information.

4.5 Renamed BCC Volume Names Don't Replicate to Other

Trees

If you rename a volume on a shared pool in a business continuity cluster, the changed volume name

will not replicate to a cluster in another eDirectory tree. This does not affect user access to the

volume in either tree.

4.6 Using iManager to Set Credentials on Linux Not Functional

You cannot use iManager on Linux to set eDirectory credentials for BCC. You must use iManager

on NetWare or Windows (the server must be in the same eDirectory tree), or use the Linux BCC

command line interface from a shell prompt to set credentials.

Novell Business Continuity Clustering 1.1 SP1 Readme 7

4.7 Problems Saving SAN Management Scripts

After filling in the values on the SAN Management Script Details page and clicking Apply and OK,

you are returned to the Resource Properties page (with the Business Continuity tab selected). You

must click OK on the Resource Properties page or your script changes will not be saved.

4.8 Resource Goes Offline After Migration

Occasionally after migrating a resource to another cluster, the resource will be in an offline-primary

state on the destination cluster. If this occurs, online the resource on the destination cluster using

either iManager or cluster commands at the server console.

4.9 Cluster and Peer Clusters Don’t Appear in Connections List

After Upgrade

After upgrading from BCC 1.0 to BCC 1.1 the cluster and peer clusters in your BCC might not

appear in the connections list in iManager. To work around this problem:

1Deselect the Enable Business Continuity Features check box in iManager and save your

changes.

2Re-enable Business Contintuity by selecting the peer clusters and selecting the Enable Business

Continuity Features check box.

For more information, see Configuring Clusters for Business Continuity in the Novell Business

Continuity Clustering 1.1 Administration Guide for NetWare.

4.10 Creating a New Cluster Resource Requires IDM Cluster

Node to Be Up

The node in each cluster where the IDM engine and drivers are running must be up before creating a

new cluster resource in your BCC. This requirement does not apply for configuring existing cluster

resources, just for creating new resources.

4.11 Disabling BCC for a Cluster Disables BCC for Cluster

Resources

If you disable BCC for a cluster using either iManager or the Cluster Disable console command,

BCC will also be disabled for those cluster resources that have been BCC-enabled. If you re-enable

BCC for the cluster, you must re-enable each individual cluster resource that you want to be BCC-

enabled.

This can be a time-consuming process if you have many BCC-enabled cluster resources. For this

reason, you should use caution when disabling BCC for an entire cluster.

4.12 Cluster Restart Command Not Functional on NetWare

The

Cluster Restart

command currently does not work on NetWare clusters. To restart your

cluster:

1At the NetWare server console of a cluster server, enter

unload ncscon

8Novell Business Continuity Clustering 1.1 SP1 Readme

2Enter

cluster restart

3Enter

load

ncscon

This problem will be fixed for NetWare 6.5 Support Pack 7 and later. Unloading ncscon will then no

longer be required.

5 Legal Notices

Novell, Inc. makes no representations or warranties with respect to the contents or use of this

documentation, and specifically disclaims any express or implied warranties of merchantability or

fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication

and to make changes to its content, at any time, without obligation to notify any person or entity of

such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any software, and

specifically disclaims any express or implied warranties of merchantability or fitness for any

particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of

Novell software, at any time, without any obligation to notify any person or entity of such changes.

Any products or technical information provided under this Agreement may be subject to U.S. export

controls and the trade laws of other countries. You agree to comply with all export control

regulations and to obtain any required licenses or classification to export, re-export, or import

deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion

lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not

use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. Please

refer to the Novell International Trade Services Web page (http://www.novell.com/info/exports/) for

more information on exporting Novell software. Novell assumes no responsibility for your failure to

obtain any necessary export approvals.

reproduced, photocopied, stored on a retrieval system, or transmitted without the express written

consent of the publisher.

For Novell trademarks, see the Novell Trademark and Service Mark list (http://www.novell.com/

company/legal/trademarks/tmlist.html).

All third-party trademarks are the property of their respective owners.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Novell Software Handbücher

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Bedienungsanleitung

Novell

Novell ACCESS MANAGER 3.1 SP1 - ADMINISTRATION Bedienungsanleitung

Novell

Novell DATA SYNCHRONIZER - 07-2010 Bedienungsanleitung

Novell

Novell LOGIN SCRIPTS - 08-2008 Bedienungsanleitung

Novell

Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 -... Bedienungsanleitung

Novell

Novell GROUPWISE 7 - WEB ACCESS Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION... Bedienungsanleitung

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.2 -... Bedienungsanleitung

Novell

Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0 -... Bedienungsanleitung

Novell

Novell GROUPWISE 7 - SECURITY POLICIES Bedienungsanleitung

Novell

Novell GROUPWISE 7 - TROUBLESHOOTING 3 Bedienungsanleitung

Novell

Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR... Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Kurzanleitung

Novell

Novell LINUX ENTERPRISE DESKTOP 11 Bedienungsanleitung

Novell

Novell POLICY IN DESIGNER 3.5 - 09-18-2009 Bedienungsanleitung

Novell

Novell IDENTITY MANAGER 3.6.1 Bedienungsanleitung

Novell

Novell GROUPWISE 8 - INTEROPERABILITY Bedienungsanleitung

Novell

Novell Account Management 2.1 Bedienungsanleitung

Novell

Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND... Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE... Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 10 SP2 - VIRTUALIZATION WITH... Bedienungsanleitung

Novell

Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE Bedienungsanleitung

Novell

Novell CLIENT FOR LINUX 2.0 SP1 - ADMINISTRATION Bedienungsanleitung

Novell

Novell IFOLDER 3.7 - SECURITY ADMINISTRATION Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch