Numark PARTY MIX Bedienungsanleitung

User Guide

English ( 3 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d’utilisation

Français ( 12 – 16 )

Guida per l’uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

Party Mix MKII

USB Cable

1/8” (3.5 mm) Stereo Aux Cable

Software Download Card

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,

etc.) and product registration, visit numark.com.

For additional product support, visit numark.com/support.

Setup

To start using Party Mix MKII:

1. Locate the Serato DJ Lite installation card in the box to download and install the

software.

2. Connect Party Mix MKII’s USB cable to an available USB port on your computer.

3. Connect output devices (headphones, speakers, etc.) to Party Mix MKII.

4. Open the software and start DJ’ing!

Connection Diagram

Computer

Head

hones

Speakers

Features

Top Panel

LHOTo-

rem ips

12 12

15 16

17 19

14 15 16

1. Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move

forward in the software panels.

2. Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,

respectively, in the software.

3. Main Gain: Adjusts the overall volume in the software.

4. Cue Gain: Adjusts the volume for headphone cueing in the software.

5. Level: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the

software.

6. High EQ: Controls the treble frequencies for the individual channels.

7. Low EQ: Controls the bass frequencies for the individual channels.

8. Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a

low-pass filter and high-pass filter, respectively.

9. Channel Volume: Adjusts the volume of the individual channels in the software.

10. Crossfader: Controls the blend between the two decks.

11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for

monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,

you will cue that channel alone (and deactivate PFL monitoring for the other channels). To

cue to multiple channels simultaneously, press the PFL buttons for those channels at the

same time.

12. Platter/Jog Wheel: This capacitive, touch-sensitive jog wheel controls the audio when

the wheel is touched and moved. You can also grab the non-touch-sensitive outer wheel

to bend the pitch of the track.

13. Pitch Fader: This controls the speed of the music. Moving towards the “+” will speed the

music up, while moving towards the “–” will slow it down.

14. Sync: Press this button to automatically match the corresponding Deck's tempo with the

opposite Deck's tempo and phase.

15. Cue: When the Deck is paused, you can set a Temporary Cue Point by moving the

Platter to place the playhead at the desired location and then pressing the Cue button.

During playback, you can press the Cue button to return the track to this Temporary Cue

Point. (If you did not set a Temporary Cue Point, then it will return to the beginning of the

track.)

16. Play/Pause: Starts and suspends playback.

17. Performance Pads: These pads can be used to trigger Hot Cues, Loops and Samples,

and to apply effects. To change the function of the pads, press the Pad Mode button.

18. Pad Mode: Press this button to change the current function of the Performance Pads.

•Cue: Each pad assigns at Hot Cue Point, or returns the track to that Hot Cue Point.

When a pad is unlit, you can assign a Hot Cue Point by pressing it at the desired

point in your track.

•Loop: Each pad triggers and auto-loop of a different length.

•Sampler: Each pad triggers a sample in Serato DJ Lite.

•Effects: Pads 1–3 on each deck trigger an effect. Pad 4 on each deck cycles

through time divisions for beat-based effects, from 1/16 to 8beats.

19. Pad Mode Indicator: These LEDs indicate the current setting of the Performance Pads.

Left Side Panel

1. USB: This USB connection sends and receives audio and

control information from a connected computer.

2. Main Output (1/8” / 3.5 mm): Use standard 1/8” / 3.5 mm

cables to connect this output to speakers or an amplifier

system.

3. Headphone Output: Connect headphones to this 1/8” (3.5 mm) jack for monitoring the

signal. The headphone volume is controlled using the Cue Gain knob.

Right Side Panel

1. Party Ball Mode: Press this button to cycle between the different lighting

modes for the Party Balls.

i. Serato DJ Lite color-controlled (default when powered on)

Note: In this mode, you can select from three lighting control patterns in

the Serato DJ Lite Setup > Mixer menu.

ii. Serato DJ Lite beat-controlled

iii. Fixed-timing random

iv. All on

v. Off

Rear Panel

1. Party Balls: When activated, these lights will illuminate

according to the current Party Ball Mode setting.

1 1 1

Beat-Matching and Mixing with Party Mix MKII and Serato DJ Lite

Below is an example of how to mix tracks using Party Mix MKII and Serato DJ Lite:

1. Start with the Level and EQ knobs at the 12 o’clock position.

You can adjust these after the tracks are loaded.

2. Turn the Browse knob to scroll through your music library.

3. Load tracks with similar BPM onto Decks 1 and 2 by pressing

the Load 1 and Load 2 buttons on Party Mix MKII.

4. Move the crossfader on Party Mix MKII all the way to the left to

send the audio from Deck 1 to the main outputs.

5. Play the track that is loaded on Deck 1.

6. Press the PFL/Cue button on Deck 2.

7. Play the track that is loaded on Deck 2 to preview it in your

headphones. Press Sync on Deck 2 to match its BPM with Deck

8. While the track is playing, press the Cue button to return to the

beginning of the track.

9. Play the track that is loaded on Deck 2.

10. Move the crossfader on Party Mix MKII toward the right to

crossfade from Deck 1 to Deck 2.

Andere Handbücher für PARTY MIX

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Numark DJ-Equipment Handbücher

Numark

Numark NuVJ Bedienungsanleitung

Numark

Numark DJio Bedienungsanleitung

Numark

Numark BCM135 Bedienungsanleitung

Numark

Numark iCDMIX 2 Bedienungsanleitung

Numark

Numark 4TRAK Bedienungsanleitung

Numark

Numark Fusion111 Technisches Dokument

Numark

Numark PHAT TRAK Bedienungsanleitung

Numark

Numark MIXSTREAM PRO Bedienungsanleitung

Numark

Numark IDJ PRO Bedienungsanleitung

Numark

Numark MIXSTREAM PRO Bedienungsanleitung

Numark

Numark DXM 06 Technisches Dokument

Numark

Numark HDMIX Bedienungsanleitung

Numark

Numark MIXTRACK PLATINUM FX Bedienungsanleitung

Numark

Numark DJ Equipment Gebrauchsanweisung

Numark

Numark Mixtrack Quad Bedienungsanleitung

Numark

Numark MIXTRACK PLATINUM Bedienungsanleitung

Numark

Numark Mixtrack Bedienungsanleitung

Numark

Numark iM9 Bedienungsanleitung

Numark

Numark OMNI CONTROL Gebrauchsanweisung

Numark

Numark NDX500 Bedienungsanleitung

Numark

Numark MIXSTREAM PRO Bedienungsanleitung

Numark

Numark iDJ Technisches Dokument

Numark

Numark AXIS 9 Service-Handbuch

Numark

Numark Mixtrack pro II Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung