Numatic WVP 800 DH Technische Daten

WVP 800 DH Operator Instructions

1) Once model no WVP 800 DH has been removed from its packaging, lay all

components next to main unit to ensure the following accessories have been included.

1 x WVP 800 DH

1 x 4mtr discharge hose

4 x 76mm locking castors

1 x 2.5 mtr vacuum hose/bend assembly

4 x 32mm plastic extension tubes

1 x wet pick up nozzle

1 x nozzle cleaner with slide on brush

Setting up the vacuum

2) Connect 2.5 mtr hose/bend assembly to hose inlet fitted on the front of the drum

assembly.

3) Connect 4 x 32mm plastic extension tubes together and then fit into 32mm plastic

bend fitted to the end of the hose.

4) Fit wet pick up nozzle onto the end of the 32mm extension tube.

5) Connect 4 mtr discharge hose (screw fitting) to rear of drum assembly.

6) Fully uncoil discharge hose and place into a suitable drainage system which must be

lower than the vacuum to work effectively.

7) Move vacuum unit into position, ensuring that is placed on level ground. Push down

the locking mechanism on each castor to secure the unit in place.

8) Ensure that power switch on the vacuum unit is switched off before plugging the

mains lead into a suitable mains power outlet. You may wish to connect the vacuum to an

R.C.D (rated at 30 Milli Amps) before connecting to a power supply.

9) Turn on vacuum switch.

10) Lower extension tubes and wet pick up nozzle into pond.

11) The Vacuum will start to suck up the liquid/debris and when full will automatically

empty the contents via the discharge hose. The quantities of water/waste can be adjusted

by adjusting the auxiliary air inlet on the plastic bend. Please note that the vacuum switch

will need to be turned off before further vacuuming commences.

12) Sometimes sediment may settle in the bottom of the drum assembly, this can easily

be rectified by flushing the unit through with clean water.

Cleaning Sides of pond

13) Remove wet pick up nozzle and extension tubes from hose assembly.

14) Connect slide on brush onto nozzle cleaner to the end of the curved wand section,

or if you are working at a greater depth add 1 or more straight wand sections.

15) Ensure slide valve is fully open on wand section, turn on vacuum and place into

the pond, and scrub pond sides to remove algae and grime.

Things to remember before using the vacuum

•This vacuum is intended only for the use of cleaning/ maintenance of Fish ponds.

•The vacuum must always be secured in place using the 4 x locking castors and on

level ground.

•The vacuum must not be used with extension leads greater than 10 metres.

•The vacuum should not be used for the removal of Hazardous or Volatile

substances.

•Do not allow children near the pond when using the vacuum or let them use the

machine.

•Never use this machine in or around the pond unless you have a Residual

Current Device Fitted (R.C.D)

•The manufacturer of this appliance cannot accept responsibility for loss of stock

or damage to ponds while using this machine.

12.03.07

Inhaltsverzeichnis

Andere Numatic Staubsauger Handbücher

Numatic

Numatic GVE 370 Bedienungsanleitung

Numatic

Numatic NBV190NX Bedienungsanleitung

Numatic

Numatic CVC 370 Bedienungsanleitung

Numatic

Numatic BS8 Bedienungsanleitung

Numatic

Numatic WV 380 Bedienungsanleitung

Numatic

Numatic JVP 180A Bedienungsanleitung

Numatic

Numatic WVT 370 Bedienungsanleitung

Numatic

Numatic WVD 570 Bedienungsanleitung

Numatic

Numatic TradeLine TEL390S Bedienungsanleitung

Numatic

Numatic A40A Bedienungsanleitung

Numatic

Numatic PPR 200-11 Bedienungsanleitung

Numatic

Numatic HVR 240-11 Bedienungsanleitung

Numatic

Numatic GVE370-2 Bedienungsanleitung

Numatic

Numatic Charles WV370-2 Bedienungsanleitung

Numatic

Numatic PSP 240-11 Bedienungsanleitung

Numatic

Numatic WV 570 Bedienungsanleitung

Numatic

Numatic NBV 190-1 Bedienungsanleitung

Numatic

Numatic HZ 190 Bedienungsanleitung

Numatic

Numatic NBV190NX Bedienungsanleitung

Numatic

Numatic NBV190NX Bedienungsanleitung

Numatic

Numatic NRV 470 Bedienungsanleitung

Numatic

Numatic CRQ 360 Bedienungsanleitung

Numatic

Numatic HET 200A Bedienungsanleitung

Numatic

Numatic BS8 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung