NXP Semiconductors QN9020 mini DK Bedienungsanleitung

UM11118

NFC-Bluetooth Low Energy Quickstart Guide

Rev. 1.2 — 9 September 2019 User manual

475312 COMPANY PUBLIC

Document information

Information Content

Keywords NFC, Bluetooth Low Energy, QN9020, CLRC663

Abstract This document describes QN9020 Mini Development board in combination

with the NFC CLRC663 plus Add-on board. Bluetooth Low Energy solution.

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 2 / 60

Revision history

Rev Date Description

1.2 20190909 •Change of the installation process

•New binary versions for the QN902x/EY revision

1.1 20181212 •Section "Smartphone Applications" updated

•Editorial updates

1.0 20180410 Initial version

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 3 / 60

1 Introduction

The purpose of this document is to describe how to use NFC-Bluetooth® Low Energy

development kit. It provides an easy way to evaluate NFC features in the combination

with Bluetooth Low Energy.

The NFC-Bluetooth Low Energy package consists of two HW Boards boards, QN9020

Mini Development board and NFC RC663 Plus Add-on board. Both boards and software

applications, used for demonstration, are described in next chapters.

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 4 / 60

2 Hardware Description

2.1 Introduction

This chapter describes hardware parts of the NFC-Bluetooth Low Energy development

kit.

2.1.1 Kit Contents

The NFC-Bluetooth Low Energy development kit includes the following:

•QN9020 Mini Development kit

•CLRC663 plus Add-on board

2.2 QN9020 Mini Development kit

The QN9020DK board is designed to make it as easy as possible to get started with your

project based on NXP® QN9020 Bluetooth Low Energy SOC.

The QN9020 Mini development board provides easy access to peripherals such as

buttons, piezo buzzer and LED. The board also provides useful interfaces such as a

USB port for UART communication and J-Link debug, and a GPIO/optional sensor board

connector.

This document describes how to use it in combination with NFC. The figure below shows

the board and main components.

Figure 1. QN9020 Mini Development kit

2.2.1 Additional Resources

Detailed description of the board can be found on:

•QN9020DK product webpage: https://www.nxp.com/products/:QN9020DK

•UM10895 - QN9020 mini DK user guide: https://www.nxp.com/docs/en/user-guide/

UM10895.pdf

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 5 / 60

2.3 CLRC663 plus Add-on board

CLRC663 plus Add-on board provides full NFC functionality and it is designed to be used

with QN9020 development board.

NFC frontend is represented with the CLRC663 multi-protocol NFC frontend IC.

Figure below shows the board and main components.

Figure 2. CLRC663 plus Add-on board

2.3.1 Interface selection

RC663 Plus Add-on board provides SPI and I2C host interface connections. The table

below shows a right configuration for each interface.

Host Interface Selection

Resistors SPI I2C

R1 open 0 Ohm (closed)

R2 open 0 Ohm (closed)

R3 open 0 Ohm (closed)

R4 open 0 Ohm (closed)

R5 0 Ohm (closed) open

R6 0 Ohm (closed) open

R7 0 Ohm (closed) open

R8 0 Ohm (closed) open

R9 0 Ohm (closed) open

R10 open 0 Ohm (closed)

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 6 / 60

Resistors SPI I2C

R11 0 Ohm (closed) open

R12 open 0 Ohm (closed)

2.3.2 Schematics

The complete schematics of the CLRC663 plus Add-on board are shown in following

figures:

Figure 3. CLRC663 plus Add-on board schematics

Figure 4. QN9020 Board Connector

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 7 / 60

Figure 5. CLRC663 plus Add-on board - PSS View

Figure 6. CLRC663 plus Add-on board - Top View

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 8 / 60

Figure 7. CLRC663 plus Add-on board - Top View

2.3.3 Additional Resources

Detailed description of the CLRC663 plus can be found on:

•CLRC663 plus product webpage: https://www.nxp.com/products/:CLRC66303HN

2.4 NFC-Bluetooth Low Energy Development kit

NFC-Bluetooth Low Energy Development kit consists of QN9020 Mini development

board and CLRC663 plus Add-on board.

Figure below shows how to assemble it in right way.

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 9 / 60

Figure 8. NFC-Bluetooth Low Energy Development board

Note:

USB mini cable is used to power up the board and to flash new FW.

NXP Semiconductors UM11118

NFC-Bluetooth Low Energy Quickstart Guide

User manual Rev. 1.2 — 9 September 2019

COMPANY PUBLIC 475312 10 / 60

3 Software Description

3.1 Introduction

This chapter describes software setup and how to run the NFC-Bluetooth Low Energy

demo application.

The purpose of the demo application is to manage data on the NFC tag through the

application running on a mobile device. The user select read or write command on the

device, which is sent to the NFC-Bluetooth Low Energy device via Bluetooth Low Energy.

When NFC-Bluetooth Low Energy device receives the command, it executes it and

sends the results back to the phone.

The demo also supports Over‐The‐Air (OTA) programming.

Software stack used in this demo is prepared for the NFC-Bluetooth Low Energy

development kit and smartphone. Demo application is split in two, the first application is

required for the NFC-Bluetooth Low Energy development kit and the second application

for the smartphone. The current version of the demo is supporting only iPhone.

Software stacks are custom developed for this solution to fit special requirements.

3.2 Block Diagram

Figure 9. NFC-Bluetooth Low Energy Block Diagram

3.3 QN9020 Software Project

This section describes how to manage software stack on the QN9020 board.

Andere Handbücher für QN9020 mini DK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NXP Semiconductors Mikrocontroller Handbücher

NXP Semiconductors

NXP Semiconductors Freescale K22 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors FRDM665SPIEVB Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LEC-IMX8MM Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Intrinsyc Open-X 8M Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors ColdFire MCF52235 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LPC1769 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LPC18xx series Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors EasyEVSE EV Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Freescale TWR-POS-K81 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale K30 Series Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors A71CL Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Harpoon Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LPC21 Series Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors A71CLARD-BA Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-K60N512-IAR Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Freescale Freedom Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors freescale semiconductor CSM12D Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors USB-KW38 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors P89LPC9321 UM10310 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors TWR-KM35Z75M Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors S12ZVM-EWP Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors P89LPC980 Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors Freescale TWR-MECH Bedienungsanleitung

NXP Semiconductors

NXP Semiconductors LPC43Sxx Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Bedienungsanleitung