OHAUS MB90 Bedienungsanleitung

Quick Start Guide MB90/MB120

Ohaus Corporation www.ohaus.com i MB90/120 Moisture Analyzers Quick Start Guide

ASSEMBLY

CONTROLS

Turns On or Off display and fan.

When pressed, sends Print command.

When pressed, either starts or stops the

drying process.

When pressed, performs Tare function.

Leveling indicator

Leveling

Feet

Used to level the Moisture Analyzer.

MAKING A SIMPLE MEASUREMENT

Use one of the included absorbent glass fiber pads as a sample to become familiar with the instrument and the

various displays.

If the display is not visible and the unit is plugged into a power source, press

the On/Off button.

There analyzer comes with a default method preinstalled. The settings of the

default method are shown on the display. To edit the settings, press on the

area where the settings are displayed as shown to the left.

Press the setting items to edit them.

Please see the instruction manual for more details.

Directly start a measurement.

Open the cover on the Moisture Analyzer.

Clean the pan.

Place the pan handler in the sample chamber. Ensure that the tongue of the

pan handler fits exactly in the slot of the draft shield element.

Tray Pan

Leveling

Feet

Leveling

Indicator

Draft Shield

Pan Support

Pan Handle

Sample Pan

MB90/MB120 Quick Start Guide

MB90/120 Moisture Analyzers Quick Start Guide ii Ohaus Corporation www.ohaus.com

Place the empty sample pan and glass fiber pan in the pan handler. The

sample pan must lie flat in the pan handler.

Note: It is advisable for you to work with the pan handler at all times. The pan

handler is ergonomic, safe and provides protection against possible burns due

to a hot sample pan.

Close the cover. This sets the Moisture Analyzer to zero automatically.

Open the cover on the Moisture Analyzer.

Wet the glass fiber pan with a 0.5 to 1 gram of water.

Note: Minimum sample size must be greater than 0.5 gram.

Starting the test

Close the cover, the Moisture Analyzer starts the drying and measurement

process automatically.

Drying and measurement

You are now able to follow the progress of the drying cycle on the display.

This first display comes up automatically when the test was started.

Observing the test progress

There are two displays available when the Moisture Analyzer is running a test.

One showing the %MC value and another showing a curve.

When pressing the data area while %MC is shown, the display will switch to

show the curve. Likewise, pressing the data area again will switch back to

show the %MC value.

The display indicates the Method Name, Temperature/Time, Initial Weight,

actual temperature, elapsed time duration of the test, moisture and curve. The

test automatically stops at the end of the measurement.

If you want to end the test sooner, press the button.

Congratulations! You have just performed your first measurement with your

moisture analyzer.

Carefully remove the sample pan handler from the drying area.

WARNING: As the pan and sample may still be hot, you should let these

cool down before removing the pan from the pan handler!

*30241177* P/N 30241177A

Andere Handbücher für MB90

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere OHAUS Messgerät Handbücher

OHAUS

OHAUS i-DT33P Bedienungsanleitung

OHAUS

OHAUS MB90 Bedienungsanleitung

OHAUS

OHAUS MC2000 Bedienungsanleitung

OHAUS

OHAUS T31P Bedienungsanleitung

OHAUS

OHAUS STARTER 3100C Bedienungsanleitung

OHAUS

OHAUS ST3100M-B Bedienungsanleitung

OHAUS

OHAUS MB90 Bedienungsanleitung

OHAUS

OHAUS ST300D-B Bedienungsanleitung

OHAUS

OHAUS STARTER 3100C Bedienungsanleitung

OHAUS

OHAUS STARTER 2200 Bedienungsanleitung

OHAUS

OHAUS Defender 5000 TD52XW Bedienungsanleitung

OHAUS

OHAUS Defender i-DT61PW Bedienungsanleitung

OHAUS

OHAUS MB27 Bedienungsanleitung

OHAUS

OHAUS ST400D-B Bedienungsanleitung

OHAUS

OHAUS Ranger 3000 Series Bedienungsanleitung

OHAUS

OHAUS MB23 Bedienungsanleitung

OHAUS

OHAUS i-DT33P Bedienungsanleitung

OHAUS

OHAUS AB23PH Bedienungsanleitung

OHAUS

OHAUS STARTER 3100C Bedienungsanleitung

OHAUS

OHAUS STARTER 2100 Bedienungsanleitung

OHAUS

OHAUS ST20D Bedienungsanleitung

OHAUS

OHAUS T51XW Bedienungsanleitung

OHAUS

OHAUS Defender 2000 Series Bedienungsanleitung

OHAUS

OHAUS ST20C-A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung