Olivetti D-Copia 200D Bedienungsanleitung

Code 546106en

d-Copia 200D

d-Copia 201D

OPERATION MANUAL

DIGITAL MULTIFUNCTIONAL

SYSTEM

PUBLICATION ISSUED BY:

Olivetti S.p.A.

Gruppo Telecom Italia

Via Jervis, 77 - 10015 Ivrea (ITALY)

www.olivetti.com

The manufacturer reserves the right to carry out modifications to the product described in this

manual at any time and without any notice.

In some areas, the "POWER" switch positions are marked "I" and "O" on the

copier instead of "ON" and "OFF".

The symbol "O" denotes the copier is not completely de-energized but in a stand-

by condition at this "POWER" switch position. If your copier is so marked, please

read "I" for "ON" and "O" for "OFF".

Caution!

For a complete electrical disconnection, pull out the main plug.

The socket-outlet shall be installed near the equipment and shall be easily

accessible.

Shielded interface cables must be used with this equipment to maintain

compliance with EMC regulations.

Do not make copies of anything which is prohibited from copying by law. The

following items are normally prohibited from copying by national law. Other

items may be prohibited by local law.

Money Stamps Bonds Stocks Bank drafts

Checks Passports Driver's licenses

CAUTIONS

Caution label on the unit

The label ( , ) in the fusing area of the unit indicates the following:

: Caution, risk of danger : Caution, hot surface

Cautions on using

Follow the cautions below when using this unit.

Warning:

• The fusing area is hot. Exercise care in this area when removing misfed paper.

• Do not look directly at the light source. Doing so may damage your eyes.

• Unit power must be turned off before installing any supplies.

Caution:

• Place the unit on a firm, level surface.

• Do not install the unit in a humid or dusty location.

• When the unit is not used for a long time, for example during prolonged holidays,

turn the power switch off and remove the power cord from the outlet.

• When moving the unit, be sure to turn the power switch off and remove the power

cord from the outlet.

• Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15

seconds before turning it back on.

• Do not cover the unit with a dust cover, cloth or plastic film while the power is on.

Doing so may prevent heat radiation, damaging the unit.

• Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

• The socket-outlet shall be installed near the unit and shall be easily accessible.

Important points when selecting an installation site

Do not install your unit in areas that are:

• damp, humid, or very dusty

• exposed to direct sunlight

• poorly ventilated

• subject to extreme temperature or

humidity changes, e.g., near an air

conditioner or heater.

Be sure to allow the required space around the

machine for servicing and proper ventilation.

Cautions on handling

Be careful in handling the unit as follows to maintain the performance of this unit.

Do not drop the unit, subject it to shock or strike it against any object.

Do not expose the drum cartridge to direct sunlight.

• Doing so will damage the surface (green portion) of the drum cartridge, causing

smudges on copies.

Store spare supplies such as drum cartridges and toner/developper cartridges

in a dark place without removing from the package before use.

• If they are exposed to direct sunlight, smudges on copies may result.

Do not touch the surface (green portion) of the drum cartridge.

• Doing so will damage the surface of the cartridge, causing smudges on copies.

20 cm

10 cm 10 cm

Trademark acknowledgements

•Microsoft

®, Windows®, Windows®98, Windows®Me, Windows®2000,

Windows®XP, Windows®Vista and Internet Explorer®are registered trademarks

or trademarks of Microsoft Corporation in the U.S.A. and other countries.

• Adobe®, the Adobe®logo, Acrobat®, the Adobe®PDF logo, and ReaderTM are

registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and other countries.

• IBM, PC/AT, and PowerPC are trademarks of International Business Machines

Corporation.

• All other trademarks and copyrights are the property of their respective owners.

Laser information

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM.

By using all or any portion of the software on the CD-ROM or in the machine, you are

agreeing to be bound by the terms of the SOFTWARE LICENSE.

Products that have earned the ENERGY STAR®are designed to

protect the environment through superior energy efficiency.

Wave length 780 nm +15 nm

-10 nm

Pulse times 12.88 µs ±12.88 ns/7 mm

Output power Max 0.2 mW

At the production line, the output power of the scanner unit is adjusted to 0.18

MILLIWATT (Total Power) PLUS 5% and is maintained constant by the operation

of the Automatic Power Control (APC).

Caution

Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001)

A small amount of ozone is produced within the unit during operation. The

emission level is insufficient to cause any health hazard.

Note:

The present recommended long term exposure limit for ozone is 0.1 ppm

(0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration.

However, since the small amount that is emitted may have an objectionable odor,

it is advisable to place the unit in a ventilated area.

1INTRODUCTION

USING THE MANUALS ................. 4

PART NAMES ................................ 5

OPERATION PANEL...................... 6

2SETTING UP THE UNIT

SETUP PROCEDURE................... 7

CHECKING PACKED

COMPONENTS AND

ACCESSORIES ............................. 8

PREPARING THE UNIT FOR

INSTALLATION .............................. 8

INSTALLING THE

TD CARTRIDGE .......................... 10

CONNECTING THE POWER CORD.. 12

3LOADING PAPER

PAPER ......................................... 14

LOADING THE PAPER TRAY ..... 15

BYPASS FEED

(including special paper).............. 17

4INSTALLING THE SOFTWARE

SOFTWARE................................. 19

BEFORE INSTALLATION ............ 20

INSTALLING THE SOFTWARE... 21

INDICATORS ON THE

OPERATION PANEL.................... 33

USING THE PRINTER MODE..... 34

USING THE SCANNER MODE... 36

HOW TO USE THE ONLINE

MANUAL ...................................... 45

5MAKING COPIES

COPY FLOW ............................... 46

ORIGINAL PLACEMENT............. 47

SET THE COPY QUANTITY ....... 49

EXPOSURE ADJUSTMENT/

PHOTO COPYING....................... 49

REDUCTION/ENLARGEMENT/

ZOOM .......................................... 51

SELECTING THE PAPER TRAY

.... 51

6SPECIAL FUNCTIONS

TWO SIDED COPYING ...............52

DESCRIPTION OF OTHER

SPECIAL FUNCTIONS................54

TONER SAVE MODE ..................54

USER PROGRAMS .....................55

DISPLAYING TOTAL NUMBER

OF COPIES .................................56

7MAINTENANCE

TONER/DEVELOPER CARTRIDGE

REPLACEMENT ..........................57

DRUM CARTRIDGE

REPLACEMENT ..........................58

CLEANING THE UNIT .................60

TROUBLESHOOTING THE UNIT

TROUBLESHOOTING .................62

STATUS INDICATORS .................63

MISFEED REMOVAL ...................64

IF A PAPER MISFEED OCCURS

IN THE MAIN UNIT WHILE

USING THE SPF (d-Copia 201D) 69

9APPENDIX

SPECIFICATIONS .......................70

ABOUT SUPPLIES AND

OPTIONS.....................................72

MOVING AND STORING

THE UNIT ....................................73

INDEX ..........................................74

CONTENTS

This chapter provides basic information for using the unit.

USING THE MANUALS

In addition to this printed manual an online manual is also provided. To get full use of

all features and functions of this product, be sure to familiarize yourself with both

manuals. This printed manual provides all installation and setup instructions as well

as instructions in the use of all copier functions. The online manual contains the

following information.

Online manual

Provides you with information on how to specify preferences and troubleshooting.

Check the online manual when you use this unit after all the initial setup is

completed.

How to use the online manual

Explains how to use the online manual.

Provides information on how to print a document.

Scan

Explains how to scan using the scanner driver and how to adjust the settings for

the Button Manager.

Troubleshooting

Provides instructions on how to solve driver or software problems.

Conventions used in this manual and online manual

• This operation manual explains the operation of the d-Copia 200D and d-Copia

201D models. In cases where the operation is the same, the d-Copia 201D is

used.

• The illustrations in this manual generally show the d-Copia 201D.

• Illustrations of driver screens and other computer screens show the screens that

appear in Windows XP Home Edition. Some of the names that appear in these

illustrations may differ slightly from the screens that appear in other operating

systems.

• This operation manual refers to the Single Pass Feeder as the "SPF".

• In this manual, the following icons are used to provide the user with information

pertinent to the use of the unit.

Warns the user that injury may result if the contents of the warning

are not properly followed.

Cautions the user that damage to the unit or one of its components

may result if the contents of the caution are not properly followed.

Notes provide information relevant to the unit regarding

specifications, functions, performance, operation and such, that

may be useful to the user.

Indicates a letter displayed in the display.

1INTRODUCTION

PART NAMES

Interface

USB

connector

Original cover

(d-Copia 200D)

Toner/Developer

cartridge Drum cartridge

SPF (d-Copia 201D)

Exit area

SPF scan area

(d-Copia 201D)

Original guide

Document feeder tray

Peep hole

Document

feeder cover

LAN

connector

(d-Copia 201D only)

Interface

Document glass

Operation panel

Front cover

Paper tray

Multi-bypass tray

Side cover

Side cover open button

Bypass tray paper guides

Paper output tray

Paper output tray extension

Power switch

Handle

Power cord socket

Fusing unit release lever

Transfer charger

Charger cleaner

OPERATION PANEL

A5 A4

A4 B5

A4 A5

141

Original to copy key and indicators

Two-sided copies from

one-sided originals.

Turn on Long Edge or

Turn on Short Edge

can be selected.

Exposure mode selector key and

indicators

Use to sequentially select the exposure

modes: AUTO, MANUAL or PHOTO.

Selected mode is shown by a lit

indicator. (p.49)

Light and dark keys and indicators

Use to adjust the MANUAL or PHOTO

exposure level. Selected exposure level

is shown by a lit indicator. (p.49) Use to

start and terminate user program

setting. (p.55)

Alarm indicators

Drum replacement required

indicator (p.58)

Misfeed indicator (p.64)

Toner/developper cartridge

replacement required indicator

(p.57)

SPF indicator (p.48) (d-Copia 201D)

SPF misfeed indicator (p.68) (d-Copia 201D)

Copy ratio selector key and

indicators

Use to sequentially select preset

reduction/enlargement copy ratios.

Selected copy ratio is shown by a lit

indicator. (p.51)

Copy ratio display (%) key

• Use to verify a zoom setting without

changing the zoom ratio. (p.51)

• Use to check the number of originals

that must be returned to the document

feeder tray if a misfeed occurs in the

machine when the SPF is used

(

d-Copia 201D

)

. (p.69)

Display

Displays the specified copy quantity,

zoom copy ratio, user program code

and error code.

SCAN key and indicator

(p.33, p.41)

ONLINE key and indicator

Lights up when the unit is used as a

printer and scanner. For description of

the ONLINE indicator, see

"INDICATORS ON THE OPERATION

PANEL" (p.33).

Start key and indicator

• Copying is possible when the

indicator is on.

• Press to start copying

• Use to set a user program. (p.55)

Power save indicator

Lights up when the unit is in a power

save mode. (p.54, p.55)

Tray select key

Use to select a paper feed station

(paper tray or multi-bypass tray). (p.51)

Paper feed location indicators

Light up to show the selected paper

feed station.

ZOOM keys and indicator

Use to select any reduction or

enlargement copy ratio from 25% to

400% in 1% increments. (When the

SPF is being used, the zoom copy ratio

range is 50% to 200%.(

d-Copia 201D

))

(p.51)

Copy quantity keys

• Use to select the desired copy

quantity (1 to 99). (p.49)

• Use to make user program entries.

(p.55)

Clear key

• Press to clear the display, or press

during a copy run to terminate

copying. (p.49)

• Press and hold down during standby

to display the total number of copies

made to date. (p.56)

Follow the installation procedure below to use the unit properly.

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown

below.

* If you are only using the unit for copying, skip this step.

If the unit does not function properly during setup or use, or if a function

cannot be used, see "TROUBLESHOOTING THE UNIT" (p.62).

1 Open the package, and make sure that all the accessories are

supplied with the unit. (p.8)

2 Remove the protective materials. (p.9)

8 Now, you can copy (p.46), print (p.35) or scan (p.36) your

document.

3 Install the toner/developer cartridger. (p.10)

4 Load the paper in the paper tray (p.15) or the multi-bypass

tray . (p.17)

5 Plug the other end of the power cord into the nearest outlet. (p.12)

6 Install the software.* (p.19)

7 Connect the interface cable* (p.25) and turn on the unit. (p.12)

2SETTING UP THE UNIT

CHECKING PACKED COMPONENTS AND

ACCESSORIES

Open the carton and check if the following components and accessories are

included.

If anything is not included or is damaged, contact your authorised service

representative.

PREPARING THE UNIT FOR INSTALLATION

1Be sure to hold the handles on

both sides of the unit to unpack

the unit and carry it to the

installation location.

Cautions leaflet

Software CD-ROM

User documentation

CD-ROM

Toner/developer cartridge

Drum cartridge

(installed in unit)

Andere Handbücher für d-Copia 200D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Olivetti Multifunktionsdrucker Handbücher

Olivetti

Olivetti SD-505 Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF3300 Bedienungsanleitung

Olivetti

Olivetti CopyLab 200 Bedienungsanleitung

Olivetti

Olivetti LINEA Office Bedienungsanleitung

Olivetti

Olivetti d-Copia 3501 Bedienungsanleitung

Olivetti

Olivetti d-Color MF222 Bedienungsanleitung

Olivetti

Olivetti d-COPIA 3004MF Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF3300 Bedienungsanleitung

Olivetti

Olivetti d-Copia 15 Bedienungsanleitung

Olivetti

Olivetti d-Color MF2001 Bedienungsanleitung

Olivetti

Olivetti d-Copia 3002MF plus Bedienungsanleitung

Olivetti

Olivetti DF-790 Bedienungsanleitung

Olivetti

Olivetti Copia 9020 Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF652 Bedienungsanleitung

Olivetti

Olivetti d-Copia 283MF plus Bedienungsanleitung

Olivetti

Olivetti d-COLOR P3100 Bedienungsanleitung

Olivetti

Olivetti d-Copia 3000MF Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF652 Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF652 Bedienungsanleitung

Olivetti

Olivetti SIMPLE_WAY Bedienungsanleitung

Olivetti

Olivetti d-COPIA 3500MF Bedienungsanleitung

Olivetti

Olivetti d-Color MF201 plus Bedienungsanleitung

Olivetti

Olivetti d-Copia 16W Bedienungsanleitung

Olivetti

Olivetti d-COLOR MF652 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Olivetti d-Copia 200D Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken