Omron HEM-637 Bedienungsanleitung

Instruction Manual

Wrist Blood Pressure Monitor

with Advanced Positioning

Sensor (APS)

Model HEM-637

Thank you for purchasing the

Omron Wrist Blood Pressure Monitor with APS.

Contents

Introduction ……………………………………………………………………… 3

Know Your Unit ……………………………………………………………… 4, 5

Suggestions Before Measuring Blood Pressure ………………………………… 6

Initial Set-Up

Battery Installation / Replacement ……………………………………… 7, 8

Automatic Memory Setting ………………………………………………… 9

Advanced Positioning Sensor (APS) Setting ……………………………… 10

Wrist Selection Setting …………………………………………………… 11

Alarm Setting ………………………………………………………… 12, 13

Date and Time Setting ………………………………………………… 14, 15

How to Reset this Monitor ………………………………………………… 16

Correct Usage

How to Apply the Wrist Cuff …………………………………………… 17

How to Wrap the Wrist Cuff ……………………………………………… 18

How to Measure Blood Pressure ……………………………………… 19-21

How to Use the Memory Function ………………………………………… 22

Memory Reset Function …………………………………………………… 23

How to Use the Graph Function ……………………………………… 24, 25

Troubleshooting ……………………………………………………………… 26

Care and Maintenance ………………………………………………………… 27

Caution ………………………………………………………………………… 28

Specifications…………………………………………………………………… 29

Warranty ……………………………………………………………………… 30

Notes …………………………………………………………………………… 31

Introduction

Thank you for purchasing the Omron HEM-637 Wrist Blood Pressure Monitor

with Advanced Positioning Sensor (APS). This remarkable instrument is ideal

for people who frequently monitor their own blood pressure because it’s so

compact and easy to use. There is no tricky arm cuff, just a small, pre-formed

wrist cuff that is easy to apply. With the push of a button the Omron Wrist

Monitor measures your blood pressure and pulse and displays the reading

on a clear digital panel. Perfect for quick, easy readings at home, at work,

and while traveling.

The Omron Wrist Monitor uses the oscillometric method of blood pressure

measurement. This means the monitor detects your blood’s movement through

the artery in your wrist and converts the movements into a digital reading.

An oscillometric monitor does not need a stethoscope so the monitor is simple

to use and measurements are easy to obtain.

Clinical research has proven a direct relationship between blood pressure

in the wrist and blood pressure in the arm. Changes in wrist blood pressure

reflect changes in arm blood pressure because the arteries in the wrist

and the arm connect. Frequently measuring the blood pressure in your

wrist will provide you and your doctor with an accurate indication

of changes in your true blood pressure.

Please read this instruction manual thoroughly before

operating the Omron Wrist Blood Pressure Monitor with

Advanced Positioning Sensor (APS) to assure proper use.

For specific information on your own blood pressure,

CONTACT YOUR PHYSICIAN.

Know Your Unit

Battery Cover

Insert the batteries.

Wrist Cuff

Wrap the wrist cuff

over your wrist snugly.

Main unit

Two AAA Alkaline

batteries (LR03)

Carrying Case

Blood pressure changes throughout the day. IntelliSense technology was developed

by Omron which enables your blood pressure monitor to inflate and deflate at the

optimum level for each individual. This helps ensure accurate measurement,

and is particularly useful for people with certain arrythmia or heart disorders.

Correct cuff positioning is critical when monitoring blood pressure. The Omron

Wrist (APS) Blood Pressure Monitor has a unique positioning sensor that

confirms the cuff is level with the user’s heart. This helps ensure that each

reading is accurate and reliable.

IntelliSense™ Technology Is An Assurance of Accuracy

Advanced Positioning Sensor (APS) Ensures a Reliable Measurement

Know Your Unit

Systolic Blood

Pressure Display

Diastolic Blood

Pressure Display

Date/Time

Display

button

Push to move the displayed

item forward. Push to move

the displayed item backward.

In the Selection Screen, push

either button for selection.

Mark

Displayed when the

stored measurement

values are called out.

SET button

Push this button

to set various items

on the monitor such

as time setting.

GRAPH button

Push this button to see

the graph.

MEMORY button

Push this button to see

the measured values

stored in the monitor.

START/STOP button

Push this button to measure

blood pressure. You can also

push this button to stop

measurement or turn off the

power. Push this button in

the Setting Screen to lock

the setting.

Pulse Display

Suggestions Before Measuring

Blood Pressure

1. Avoid eating, smoking and exercising for at least

30 minutes before taking measurement. Also rest

for at least 10 to 15 minutes before taking a reading.

2. Stress raises blood pressure. Avoid taking

measurements during stressful times.

3. The cuff can be applied to your left

or right wrist.

4. Measurements should be taken in a quiet place

and you should be in a relaxed, seated position.

5. Remain still and do not talk during

the measurements.

6. Keep a record of you blood pressure and pulse for you doctor.

Remember, a single measurement does not provide an accurate indication

of your true blood pressure. You need to take and record several readings

over a period of time. Try to measure your blood pressure at the same

time each day for consistency.

7. Wait 2-3 minutes between measurements. Waiting allows the engorged blood

vessels to return to normal. You may require more rest time between readings

depending on your individual physiological characteristics.

Battery Installation

Use this monitor after inserting batteries in the main unit.

1. Place the main unit with the Battery

Cover facing upward.

2. Remove the Battery Cover.

Push down the indent portion of Battery Cover

and slide it into the direction of the arrow.

3. Insert two AAA Batteries with the polarities

in the correct direction.

4.Close the Battery Cover.

Close the Battery Cover by sliding it as shown

in the Figure until it clicks.

Battery Replacement

• High performance alkaline dry cell batteries (2 “AAA”) should be good

for approximately 300 readings.

• Battery life varies with ambient temperature. Battery life is shorter under

cold conditions such as during the winter.

• If the battery replacement symbol blinks while measuring or if pressure

is not applied when the START / STOP button is pressed, replace both

batteries (use the same brand).

• Holding the START / STOP button down may shorten battery life. To avoid

pressure on the button when transporting or storing, use the case provided.

• If the batteries have been replaced or removed, resetting of the date and

time is required.

• If you are not going to use this monitor for a long period of time (approximately

three months or more), remove the batteries.

• Do not use batteries not specified for this unit, worn and new batteries

together, or different brands of batteries together.

Automatic Memory Setting

Automatic Memory Screen

Automatic Memory OFF Screen

1. Push the SET button while the power

is turned off.

Automatic Memory Screen is displayed.

2. Select ON or OFF.

• The monitor is set to ON (to store) at time

of your purchase.

To set it to OFF, push the button.

• If you want to set to ON after setting it

to OFF, push the button.

3. Lock the setting.

If you are going to change other settings, push the SET button

to lock the setting.

• When you push the SET button, the display changes to the

Position Sensor Screen.

If you want to finish operation after locking the setting, push

the START/STOP button to turn off the power.

The monitor stores the measured values and the date and time of measurement,

which is helpful for the continuous blood pressure management.

However, if more than one person is expected to use this monitor, the measured

values of more than one person will be stored. In that case, setting the Automatic

Memory to OFF is recommended.

Advanced Positioning Sensor (APS) Setting

Position Sensor Screen

Position Sensor OFF Screen

Position Sensor ON

and SIGNAL ON Screen

Position Sensor ON and

SIGNAL OFF Screen

1. Push the SET button while the power

is turned off.

Keep pressing the SET button until the

Position Sensor Screen is displayed.

2. Select ON or OFF.

• The Position Sensor is set to ON and the

SIGNAL is set to ON (to beep) at the time

of your purchase of the monitor.

Set the (APS) function to ON or OFF and set SIGNAL of the position sensor

to ON (beeps) or OFF (does not beep).

For setting the Position Sensor to OFF

Push the button to set the Position

Sensor to OFF.

• To set it to ON after setting it OFF,

push the button.

• There is no SIGNAL setting when

the Position Sensor is set to OFF.

How to set the SIGNAL to OFF when

the Position Sensor is set to ON

Push the SET button to make

SIGNAL ON flash.

To set the monitor to SIGNAL OFF, push

the button.

3. Lock the setting.

If you are also going to change other settings, push the SET button

to lock the setting.

• When you push the SET button, the display changes

to Measurement Screen.

If you want to finish after locking the setting, push the START/STOP

button to turn off the power.

Inhaltsverzeichnis

Andere Omron Blutdruckmessgerät Handbücher

Omron

Omron BP5350 Bedienungsanleitung

Omron

Omron BP7350CAN Bedienungsanleitung

Omron

Omron HEM-737 Bedienungsanleitung

Omron

Omron INTELLI 637IT Bedienungsanleitung

Omron

Omron BP742CANN Bedienungsanleitung

Omron

Omron M7 Intelli IT Bedienungsanleitung

Omron

Omron BP710N Bedienungsanleitung

Omron

Omron M3 Intellisense Bedienungsanleitung

Omron

Omron HBP-1100 Bedienungsanleitung

Omron

Omron M6 Comfort Bedienungsanleitung

Omron

Omron MIT3 Bedienungsanleitung

Omron

Omron M7 Intelli IT Bedienungsanleitung

Omron

Omron HEM-7211 Bedienungsanleitung

Omron

Omron HEM-6131 Bedienungsanleitung

Omron

Omron M3 Intellisense Bedienungsanleitung

Omron

Omron 705CP-II Bedienungsanleitung

Omron

Omron 3 Series Bedienungsanleitung

Omron

Omron M3 Intellisense Bedienungsanleitung

Omron

Omron BP742N Bedienungsanleitung

Omron

Omron R5 Prestige Bedienungsanleitung

Omron

Omron S1 Bedienungsanleitung

Omron

Omron RS6 Bedienungsanleitung

Omron

Omron M2 Compact Bedienungsanleitung

Omron

Omron HEM--790IT Bedienungsanleitung

Beliebte Blutdruckmessgerät Handbücher anderer Marken

Little Doctor

Little Doctor LD7 Bedienungsanleitung

Microlife

Microlife WatchBP Office Targe Bedienungsanleitung

Mx Onda

Mx Onda MX-CP2395 Bedienungsanleitung

Braun

Braun VitalScan 1 Bedienungsanleitung

Little Doctor

Little Doctor LD-91 Bedienungsanleitung

Sanitas

Sanitas SBM 09 Bedienungsanleitung

A&D

A&D LifeSource UB-328 Bedienungsanleitung

König Electronic

König Electronic HC-BLDPRESS200 Bedienerhandbuch

Leicke

Leicke Sharon Bedienungsanleitung

3B SCIENTIFIC

3B SCIENTIFIC U11395 Bedienungsanleitung

Soehnle

Soehnle SYSTO MONITOR 100 Bedienungsanleitung

Nasco Healthcare

Nasco Healthcare Simulaids Life/form LF01095U Referenzhandbuch

Microlife

Microlife WatchBP office Bedienungsanleitung

HoMedics

HoMedics MiBody 360 Bedienungsanleitung

ForaCare

ForaCare FORA P30 Plus Bedienungsanleitung

JOYTECH

JOYTECH DBP-6296B Bedienungsanleitung

visomat

visomat double comfort Bedienungsanleitung

Spacelabs Healthcare

Spacelabs Healthcare 90217A Bedienungsanleitung