Omron Sysmac NJ-series Bedienungsanleitung

Machine Automation Controller NJ-series

EtherNet/IPTM

Connection Guide

OMRON Corporation

Displacement Sensor

(ZW-7000 series)

P653-E1-01

About Intellectual Property Rights and Trademarks

Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

ODVA and EtherNet/IPTM are trademarks of ODVA.

EtherCAT(R) is registered trademark and patented technology, licensed by Beckhoff Automation

GmbH, Germany.

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

Company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

Table of Contents

1. Related Manuals........................................................................................ 1

2. Terms and Definitions............................................................................... 2

3. Precautions................................................................................................ 4

4. Overview .................................................................................................... 5

5. Applicable Devices and Device Configuration ....................................... 6

5.1. Applicable Devices ................................................................................ 6

5.2. Device Configuration ............................................................................. 7

6. EtherNet/IP Settings.................................................................................. 9

6.1. Parameters............................................................................................ 9

6.2. Data Types to Use for Tag Data Links................................................. 10

6.3. Global variables................................................................................... 11

6.4. Tag Sets.............................................................................................. 14

6.5. Tag Data Link Table ............................................................................ 14

7. EtherNet/IP Connection Procedure........................................................ 15

7.1. Work Flow............................................................................................ 15

7.2. Sensor Controller Setup ...................................................................... 16

7.3. Controller Setup................................................................................... 26

7.4. EtherNet/IP Communication Status Check.......................................... 43

8. Initialization method................................................................................ 48

8.1. Initializing Controller ............................................................................ 48

8.2. Initializing Sensor Controller................................................................ 48

9. Appendix: Procedure Using the Project File......................................... 49

9.1. Work Flow............................................................................................ 49

9.2. Controller Setup................................................................................... 50

10. Revision History...................................................................................... 52

．

Related Manuals

1. Related Manuals

To ensure system safety, make sure to always read and follow the information provided in all

Safety Precautions and Precautions for Safe Use in the manuals for each device which is

used in the system.

Cat. No. Model Manual name

W500 NJ501-[][][][]

NJ301-[][][][]

NJ101-[][][][]

NJ-series

CPU Unit

Hardware User's Manual

W501 NJ501-[][][][]

NJ301-[][][][]

NJ101-[][][][]

NJ/NX-series

CPU Unit

Software User's Manual

W506 NJ501-[][][][]

NJ301-[][][][]

NJ101-[][][][]

NJ/NX-series

CPU Unit Built-in EtherNet/IPTM Port

User's Manual

W504 SYSMAC-SE2[][][] Sysmac Studio Version 1

Operation Manual

0969584-7 W4S1-05[]

W4S1-03B Switching Hub

W4S1-series

Users Manual

Z362 ZW-7000[] Displacement Sensor ZW-7000 series

Confocal Fiber Type

Displacement Sensor User’s Manual

Z363 ZW-7000[] Displacement Sensor ZW-7000 series

Confocal Fiber Type Displacement

Sensor User’s Manual for

Communications Settings

．

Terms and Definitions

2. Terms and Definitions

Term Explanation and Definition

Node A controller and a device are connected to an EtherNet/IP network via

EtherNet/IP ports. EtherNet/IP recognizes each EtherNet/IP port

connected to the network as one node.

When a device with two EtherNet/IP ports is connected to the

EtherNet/IP network, EtherNet/IP recognizes this device as two nodes.

EtherNet/IP achieves the communications between controllers or the

communications between a controller and a device by exchanging data

between these nodes connected to the network.

Tag A minimum unit of the data that is exchanged on the EtherNet/IP network

is called a tag. The tag is defined as a network variable or as a physical

address, and it is assigned to the memory area of each device.

Tag set In the EtherNet/IP network, a data unit that consists of two or more tags

can be exchanged. The data unit consisting of two or more tags for the

data exchange is called a tag set. Up to eight tags can be configured per

tag set for OMRON controllers.

Tag data link In EtherNet/IP, the tag and tag set can be exchanged cyclically between

nodes without using a user program.

This standard feature on EtherNet/IP is called a tag data link.

Connection A connection is used to exchange data as a unit within which data

concurrency is maintained. The connection consists of tags or tag sets.

Creating the concurrent tag data link between the specified nodes is

called a "connection establishment". When the connection is

established, the tags or tag sets that configure the connection are

exchanged between the specified nodes concurrently.

There are two ways to specify the connection: one is to specify a tag set

name (tag name), and the other is to specify an instance number of

Assembly Object. In Sysmac Studio, the connection is set by specifying

the instance number.

Connection type There are two kinds of connection types for the tag data link connection.

One is a multi-cast connection, and the other is a unicast (point-to-point)

connection. The multi-cast connection sends an output tag set in one

packet to more than one node. The unicast connection separately sends

one output tag set to each node. Therefore, multi-cast connections can

decrease the communications load if one output tag set is sent to more

than one node.

．

Terms and Definitions

Term Explanation and Definition

Originator and

Target To operate tag data links, one node requests the opening of a

communications line called a "connection".

The node that requests to open the connection is called an "originator",

and the node that receives the request is called a "target".

Each communication data is called an ''originator variable'' and a ''target

variable''.

In Sysmac Studio, the instance number is specified in the target variable.

Tag data link

parameter A tag data link parameter is the setting data to operate tag data links.

It includes the data to set tags, tag sets, and connections.

EDS file A file that describes the number of I/O points for the EtherNet/IP device

and the parameters that can be set via EtherNet/IP.

RPI This is an abbreviation for Requested Packet Interval.

RPI indicates the data I/O refresh cycle that is set for each connection

between the originator and the target.

．

Precautions

3. Precautions

(1) Understand the specifications of devices which are used in the system. Allow some

margin for ratings and performance. Provide safety measures, such as installing a safety

circuit, in order to ensure safety and minimize the risk of abnormal occurrence.

(2) To ensure system safety, make sure to always read and follow the information provided

in all Safety Precautions and Precautions for Safe Use in the manuals for each device

which is used in the system.

(3) The user is encouraged to confirm the standards and regulations that the system must

conform to.

(4) It is prohibited to copy, to reproduce, and to distribute a part or the whole of this

document without the permission of OMRON Corporation.

(5) The information contained in this document is current as of June 2016. It is subject to

change for improvement without notice.

The following notations are used in this document.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury, or may result in serious

injury or death. Additionally there may be significant property

damage.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury or property damage.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Symbol

The filled circle symbol indicates operations that you must do.

The specific operation is shown in the circle and explained in the text.

This example shows a general precaution for something that you must do.

．

Overview

4. Overview

This document describes the procedures for connecting Displacement Sensor (hereinafter

referred to as Sensor Controller) to NJ Series Machine Automation Controller (hereinafter

referred to as Controller) via EtherNet/IP, both produced by OMRON Corporation (hereinafter

referred to as OMRON), and for checking their connections.

Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to

understand setting methods and key points to operate EtherNet/IP tag data links.

Additional Information

Settings described in 7.3. Controller Setup are made in advance in the Sysmac Studio project

file (hereinafter referred to as project file) listed below. Refer to Section 9. Appendix:

Procedure Using the Project File for information on how to use the project file.

Obtain the project file with a latest version from OMRON Corporation.

Name File name Version

Sysmac Studio project file

(extension: csm2) P653_NJ_EIP_OMRON_ZW-70

00_EV100.csm2 Ver.1.00

．

Applicable Devices and Device Configuration

5. Applicable Devices and Device Configuration

5.1. Applicable Devices

The applicable devices are as follows:

Manufacturer Name Model

OMRON

NJ-series CPU Unit

NJ501-[][][][]

NJ301-[][][][]

NJ101-[][][][]

OMRON Confocal Fiber Type

Displacement Sensor

Sensor Controller

Sensor Head

ZW-7000[]

ZW-S70[][]

Precautions for Correct Use

In this document, the devices with models and versions listed in 5.2. Device Configuration are

used as examples of applicable devices to describe the procedures for connecting the

devices and checking their connections.

You cannot use devices with versions lower than the versions listed in 5.2.

To use the above devices with models not listed in 5.2. or versions higher than those listed in

5.2., check the differences in the specifications by referring to the manuals before operating

the devices.

Additional Information

This document describes the procedures for establishing the network connections.

It does not provide information on operation, installation, wiring method, device functionality,

or device operation, which is not related to the connection procedures.

Refer to the manuals or contact your OMRON representative.

．

Applicable Devices and Device Configuration

5.2. Device Configuration

The hardware components to reproduce the connection procedures in this document are as

follows:

Manufacturer

Name

Model

Version

OMRON

NJ-series CPU Unit

(Built-in EtherNet/IP port)

NJ501-1500

Ver.1.10

OMRON

Power Supply Unit

NJ-PA3001

OMRON

Switching hub

W4S1-05C

Ver.1.0

24 VDC power supply

(for Switching hub)

OMRON

Sysmac Studio

SYSMAC-SE2[][][]

Ver.1.15

Personal computer (OS: Windows 7)

USB cable

(USB 2.0 type B connector)

LAN cable (STP (shielded,

twisted-pair) cable of Ethernet

category 5 or higher)

OMRON

Sensor Controller

ZW-7000

Ver.2.020

OMRON Sensor Head ZW-S7030

OMRON Calibration ROM (Supplied with Sensor

Head)

OMRON

24 VDC power supply

(for Sensor Controller)

(24 VDC, 2.5A, 60W)

S8VS-06024

Precautions for Correct Use

Update Sysmac Studio to the version specified in this Clause 5.2. or to a higher version.

If you use a version higher than the one specified, the procedures and related screenshots

described in Section 7. and subsequent sections may not be applicable. In that case, use the

equivalent procedures described in this document by referring to the Sysmac Studio Version

1 Operation Manual (Cat. No. W504).

ZW-7000

24 VDC power

supply

(for Sensor Controller)

ZW-S7030

USB cable

LAN cable

NJ501-1500

(Built-in EtherNet/IP port)

W4S1-05C

Personal computer

(Sysmac Studio installed,

OS: Windows 7)

LAN cable

24 VDC power

supply

(for Switching hub)

Calibration ROM

Andere Handbücher für Sysmac NJ-series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Controller Handbücher

Omron

Omron E5CN-H Bedienungsanleitung

Omron

Omron V640 Bedienungsanleitung

Omron

Omron C200HX-CPU-E Series Bedienungsanleitung

Omron

Omron CJ1W- ECT21 Bedienungsanleitung

Omron

Omron CK3W-AX2323 Series Benutzerhandbuch

Omron

Omron G9SP Series Bedienungsanleitung

Omron

Omron CJ2 Series Bedienungsanleitung

Omron

Omron NX Series Bedienungsanleitung

Omron

Omron E5CN-U - Bedienungsanleitung

Omron

Omron C20H Bedienungsanleitung

Omron

Omron G3ZA Bedienungsanleitung

Omron

Omron NX102 series Bedienungsanleitung

Omron

Omron CQM1H - 08-2005 Stücklistenhandbuch

Omron

Omron CS CS1W-ETN21 Gebrauchsanweisung

Omron

Omron NE1A-SCPU02 Bedienungsanleitung

Omron

Omron SYSMAC Gateway Bedienungsanleitung

Omron

Omron C200HE-CPU42-E Handbuch

Omron

Omron G9SP-N20S Installationshandbuch

Omron

Omron SYSMAC CPM1 Bedienungsanleitung

Omron

Omron CP1E INTRODUCTION Referenzhandbuch

Omron

Omron TJ1-MC04 Bedienungsanleitung

Omron

Omron NJ501-1300 Bedienungsanleitung

Omron

Omron E5AR-T Bedienungsanleitung

Omron

Omron C200H-ASC11 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch