Omron NS - HOST Gebrauchsanweisung

HOST CONNECTION MANUAL

Programmable Terminals

NS-Series

NS12-TS00(B)-V1, NS12-TS01(B)-V1

NS10-TV00(B)-V1, NS10-TV01(B)-V1

NS8-TV00(B)-V1, NS8-TV01(B)-V1

NS8-TV10(B)-V1, NS8-TV11(B)-V1

NS5-SQ00(B)-V1, NS5-SQ01(B)-V1

Cat.No. V085-E1-02

Notice

OMRON products are manufactured for use according to proper procedures by a

qualified operator and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual.

Always heed the information provided with them. Failure to heed precautions can result

in injury to people or damage to property.

! DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

! WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

! Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word "Unit" is also capitalized when it

refers to an OMRON product, regardless of whether or not it appears in the proper name of the

product.

The abbreviation "Ch," which appears in some displays and on some OMRON products, often

means "word" and is abbreviated "Wd" in documentation in this sense.

The abbreviation "PLC" means Programmable Controller.

The abbreviation “host” means a controller, such as an IBM PC/AT or compatible computer,

that controls a PT (Programmable Terminal).

Visual Aids

The following headings appear in the left column of the manual to help you locate different

types of information.

Note Indicates information of particular interest for efficient and convenient operation of

the product.

Reference Indicates supplementary information on related topics that may be of interest to

the user.

1, 2, 3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

CS1G-CPU@@-VI Boxes in model numbers indicate variable characters. For example,

"CS1G-CPU@@-EV1" indicates the following models: CS1G-CPU42-EV1,

CS1G-CPU43-EV1, CS1G-CPU44-EV1, and CS1G-CPU45-EV1.

©OMRON, 2004

any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is

constantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for

errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this

publication.

Contents

Notice .................................................................................................................................1

About this Manual .................................................................................................................6

Related Manuals...................................................................................................................7

Terminology ..........................................................................................................................8

Introduction ...........................................................................................................................9

Section 1 Possible Combinations

1-1List of combinations

1-2NS-Designer and System Program version

Section 2 Connection of Temperature Controller

2-1Outline

2-2Possible combinations

2-3Configuration

2-4Setting projects

2-5Monitor variables area in temperature controller

2-6Operation of temperature controller

2-7Functional restrictions

Section 3 Connection via Memory Link

3-1How does Memory Link work

3-2Setup

3-3Communications procedures

3-4What has been changed since NT31/631

About this Manual

Section 1 Possible Combinations

This section provides information of possible combination of NS-Designer and system program when making connection

with PT and host other than OMRON PLCs.

Section 2 Connection of Temperature Controller

This section provides information on connection methods and communications setting in connecting NS-series PTs with

a Temperature Controller by serial port. It also provides information Temperature Controller which can be connected to

the PT.

Section 3 Connection via Memory Link

This section describes information on connection methods and communication setting in connecting NS-series PTs with

a host by Memory Link.

WARNING Failure to read and understand the information provided in this manual may result in

personal injury or death, damage to the product, or product failure. Please read each

section in its entirety and be sure you understand the information provided in the section

and related sections before attempting any of the procedures or operations given.

Related Manuals

The following manuals are used for NS-series PTs. (The boxes at the end of the catalog

numbers indicate the revision code.)

NS Series -V1 Host Connection Manual.....................................V085-E1-@

Provides information on NS Series V1 models (i.e., NS12-V1, NS10-V1, NS8-V1,and

NS5-V1).

Describes how to connect the PT to the host and peripheral devices, methods to setup

communications and operation, and procedures for maintenance.

Refer to the NS Series Programming Manual (V073-E1-@) for information on PT

functions and specific operating procedures.

NS Series -V1 Setup Manual .....................................................V083-E1-@

Provides information on NS Series V1 models (i.e., NS12-V1, NS10-V1, NS8-V1,and

NS5-V1).

Describes how to connect the PT to the host and peripheral devices, methods to setup

communications and operation, and procedures for maintenance.

Refer to the NS Series Programming Manual (V073-E1-@) for information on PT

functions and specific operating procedures.

NS Series Setup Manual……………………………………………..V072-E1-@

Provides information on existing NS Series models (i.e., NS12, NS10, and NS7).

Describes how to connect the PT to the host and peripheral devices, methods to setup

communications and operation, and procedures for maintenance.

Refer to the NS Series Programming Manual (V073-E1-@) for information on PT

functions and specific operating procedures.

NS Series Programming Manual ................................................V073-E1-@

Describes the screen configurations, object functions, and host communications for the

PT.

NS-Designer Operation Manual..................................................V074-E1-@

Describes operating procedures for the NS-Designer, which is used to create the

screens displayed on the PT and transfer them to the PT. It includes screen creation

and transfer procedures.

Terminology

The following terminology is used in this manual.

PT In this manual, indicates an NS-series Programmable Terminal.

NS Series Indicates products in the OMRON NS@@ Series of Programmable Terminals.

PLC Indicates a Programmable Controller in the OMRON SYSMAC CS/CJ, C, or

CVM1/CV Series of Programmable Controllers.

CS/CJ Series Indicates Programmable Controllers in the OMRON SYSMAC CS/CJ Series of

Programmable Controllers: CS1G, CS1H, CS1G-H, CS1H-H, CJ1G, CJ1M.

C Series Indicates products in the OMRON SYSMAC C Series of Programmable

Controllers: C200HS, C200HX(-Z), C200HG(-Z), C200HE(-Z), CQM1, CQM1H,

CPM1A, CPM2A, CPM2C.

CVM1/CV Series Indicates products in the OMRON SYSMAC CVM1/ CV Series of Programmable

Controllers: CV500, CV1000, CV2000, CVM1

Serial Communications Unit Indicates a Serial Communications Unit for an OMRON CS/CJ-series PLC.

Serial Communications Board Indicates a Serial Communications Board for an OMRON CS-series or CQM1H

PLC.

Communications Board Indicates a Communications Board for an OMRON C200HX/HG/HE(-Z) PLC.

CPU Unit Indicates a CPU Unit in the OMRON SYSMAC CS/CJ, C, or CVM1/CV Series of

Programmable Controllers.

NS-Designer Indicates the OMRON NS-Designer (NS-NSDC1-V@).

Host Indicates the PLC, IBM PC/AT or compatible computer, or personal computer

functioning as the control device and interfaced with the NS-series PT.

Programming Manual Indicates the NS Series Programming Manual (V073-E1-@).

Introduction

•Intended Audience

This manual is intended for the following personnel, who must also have knowledge of

electrical systems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems into production facilities.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and connecting FA systems.

• Personnel in charge of managing FA systems and facilities.

•General Precautions

• The user must operate the product according to the performance specifications

described in the operation manuals.

• Do not use the PT touch switch input functions for applications where danger to human

life or serious property damage is possible, or for emergency switch applications.

• Before using the product under conditions which are not described in the manual or

applying the product to nuclear control systems, railroad systems, aviation systems,

vehicles, combustion systems, medical equipment, amusement machines, safety

equipment, and other systems, machines and equipment that may have a serious

influence on lives and property if used improperly, consult your OMRON representative.

• Make sure that the ratings and performance characteristics of the product are sufficient

for the systems, machines, and equipment, and be sure to provide the systems,

machines, and equipment with double safety mechanisms.

• This manual provides information for connecting and setting up an NS-series PT. Be

sure to read this manual before attempting to use the PT and keep this manual close at

hand for reference during installation and operation.

•Safety Precautions

Do not attempt to take the Unit apart and do not

touch any internal parts while the power is being

supplied. Doing either of these may result in

electrical shock.

•Operating Environment Precautions

1. Do not install the Unit in the following places:

• Locations subject to direct sunlight

• Locations subject to temperatures or humidity outside the range specified in the

specifications

• Locations subject to condensation as the result of severe changes in temperature

• Locations subject to corrosive or flammable gases

• Locations subject to dust (especially iron dust) or salts

• Locations subject to exposure to water, oil, or chemicals

• Locations subject to shock or vibration

2. Take appropriate and sufficient countermeasures when installing systems in the following

locations:

• Locations subject to static electricity or other forms of noise

• Locations subject to strong electromagnetic fields

• Locations subject to possible exposure to radioactivity

• Locations close to power supplies

•Application Precautions

1. When unpacking the Units, check carefully for any external scratches or other damage.

Also, shake the Units gently and check for any abnormal sound.

2. The mounting panel must be between 1.6 and 4.8 mm thick. Tighten the Mounting

Brackets evenly to a torque of between 0.5 and 0.6 N⋅m to maintain water and dust

resistance. Make sure the panel is not dirty or warped and that it is strong enough to hold

the Units.

3. Do not let metal particles enter the Units when preparing the panel.

4. If conformance to EC Directives (Low Voltage Directive) is required, use reinforced

insulation for the power supplies.

5. Do not connect an AC power supply to the power terminals.

6. Use a DC power supply with minimal fluctuation voltage.

Rated power supply voltage: 24 VDC

(Allowable range: 20.4 to 27.6 VDC)

Capacity: 25 W min. (NTLP:INFORMATION MISSING IN JAPANESE NS5: ???W min.)

7. Do not perform a dielectric voltage test.

8. Use a twisted-pair cable with a cross-sectional area of at least 2 mm2 to connect to the

power terminals and always use M3.5 crimp terminals. Tighten the terminal screws to a

torque of 0.8 N⋅m. Make sure the screws are properly tightened.

9. Ground the Unit correctly to prevent operational errors caused by noise.

10. Do not touch the surface of the circuit board or the components mounted on it with your

bare hands. Discharge any static electricity from your body before handling the board.

11. Confirm that the current capacity of the connected device is 250 mA or less before using

the 5-V power supply from pin 6 of the serial port A, B connectors. The 5-V output of the

PT is 250 mAmax. at 5 V ±5%.

12. Turn OFF the power supply before connecting or disconnecting cables.

13. Always tighten the connector screws after connecting communications cables.

14. The maximum tensile load for cables is 30 N. Do not apply loads greater than this.

15. Confirm the safety of the system before turning ON or OFF the power supply or before

pressing the reset button.

16. The whole system may stop depending on how the power supply is turned ON or OFF.

Turn ON or OFF the power supply according to the specified procedure.

17. Start actual system application only after sufficiently checking screen data. macros, and

the operation of the program in the PC (host).

18. Always reset the power supply after changing switch settings.

19. After changing the settings of the DIP switch, always turn the power supply OFF and ON

or reset the PT.

20. Do not perform the following operations while the Memory Card is being accessed:

• Turning OFF the power supply to the PT

• Pressing the PT’s reset switch

• Removing the Memory Card

Always following the specified procedure when removing the Memory Card.

21. Do not press the touch switch with a force greater than 30 N.

22. Confirm the safety of the system before pressing touch switches.

23. Do not accidentally press touch switches when the backlight is not lit or when the display

does not appear.

24. Signals from the touch switches may not be input if the switches are pressed

consecutively at high speed. Confirm each input before proceeding to the next one.

25. Before initializing screen data, confirm that existing data is backed up at the NS-Designer.

26. When changing the password with the system menu, do not reset or turn OFF the power

supply until writing is finished (i.e., until the Write Button returns to its original condition). It

may become impossible to manipulate screens if the password is not set correctly.

27. When using the device monitor, confirm the safety of the system before performing the

following operations.

• Changing monitor data

• Changing operation modes

• Forced setting or resetting

• Changing present values or set values

28. Do not use benzene, paint thinner, or other volatile solvents, and do not use chemically

treated cloths.

29. Dispose of any battery that has been dropped on the floor or otherwise subjected to

excessive shock.

30. Do not attempt to disassemble, repair, or modify the Unit in any way.

31. Dispose of the Units and batteries according to local ordinances as they apply.

32. To ensure system safety, incorporate a program that periodically calls PT operation bits

from the host side to check that the PT is properly operating.

33. Do not connect an USB connector to any device that is not applicable.

34. Before connecting an USB connector to a device, make sure that the device is free of

damage.

35. When mounting the Battery, be sure to use the correct Battery and mount it correctly.

1-1

Section1

Possible combinations

This section explains in general how to connect hosts other than NS-V1 Series

Omron PLC and which models to connect.

1-1List of combinations

1-2NS-Designer and System Program version

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NA5-15*101 series Benutzerhandbuch

Omron

Omron WT30 Bedienungsanleitung

Omron

Omron NT2S-SF122B-E START V1.03 Gebrauchsanweisung

Omron

Omron NT612G Series Bedienungsanleitung

Omron

Omron NS8-TV0-V2 Benutzerhandbuch

Omron

Omron NA-series Gebrauchsanweisung

Omron

Omron NT-series Bedienungsanleitung

Omron

Omron DRT2 SERIES DEVICENET SLAVES - OPERATION ... Bedienungsanleitung

Omron

Omron DRT1-ID Bedienungsanleitung

Omron

Omron NT21 Bedienungsanleitung

Omron

Omron NS - Betriebsanleitung

Omron

Omron NP Series Bedienungsanleitung

Omron

Omron NP3 Series Referenzhandbuch

Omron

Omron NSH5 Bedienungsanleitung

Omron

Omron NV Series Betriebsanleitung

Omron

Omron NSH5 Series Bedienungsanleitung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron NA-series Bedienungs- und Wartungshandbuch

Omron

Omron ns series Benutzerhandbuch

Omron

Omron PC CONNECTION - 04-1997 Bedienungsanleitung

Omron

Omron NV Series Benutzerhandbuch

Omron

Omron NXR-ILM08C-EIT Bedienungsanleitung

Omron

Omron NT600M Series Bedienungsanleitung

Omron

Omron NT2S-SF121B-E - Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung