Omron NS - 2 Bedienungsanleitung

Cat. No. V086-E1-07

Programmable Terminals

RGB and Video Input Unit

NS-Series

OPERATION MANUAL

Notice

OMRON products are manufactured for use according to proper procedures by a

qualified operator and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual.

Always heed the information provided with them. Failure to heed precautions can result

in injury to people or damage to property.

! DANGER Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

! WARNING Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

! Caution Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word "Unit" is also capitalized

when it refers to an OMRON product, regardless of whether or not it appears in the

proper name of the product.

The abbreviation "Ch," which appears in some displays and on some OMRON products,

often means "word" and is abbreviated "Wd" in documentation in this sense.

The abbreviation "PLC" means Programmable Controller.

The abbreviation “host” means a controller, such as an IBM PC/AT or compatible

computer, that controls a PT (Programmable Terminal).

Visual Aids

The following headings appear in the left column of the manual to help you locate

different types of information.

Note Indicates information of particular interest for efficient and

convenient operation of the product.

Reference Indicates supplementary information on related topics that may be

of interest to the user.

1, 2, 3... Indicates lists of one sort or another, such as procedures,

checklists, etc.

OMRON, 2004

form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written

permission of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON

is constantly striving to improve its high-quality products, the information contained in this manual is subject to change

without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the

information contained in this publication.

Contents

Notice.........................................................................................................................1

About this Manual......................................................................................................4

Related Manuals........................................................................................................5

Terminology ..............................................................................................................6

Introduction ..............................................................................................................7

Precautions for Safe Use...........................................................................................9

Precautions for Correct Use ....................................................................................10

Section 1 Overview

1-1 RGB and Video Input Unit Features .....................................................1-2

1-2 System Configuration ...........................................................................1-3

1-3 Restrictions in Installing an NS-CA002 RGB/Video Input Unit

on an NS15 PT .....................................................................................1-4

Section 2 Installing the RGB and Video Input Unit

2-1 RGB and Video Input Unit Components .........................................................2-2

2-2 Nomenclature and Functions ..........................................................................2-3

2-3 Installing the RGB and Video Input Unit..........................................................2-4

2-4 Connecting Video Input Connectors .............................................................2-10

2-5 Connecting the RGB Input Connector...........................................................2-12

2-6 Connecting the Console Port Connector.......................................................2-13

Section 3 RGB and Video Input Unit Functions

3-1 Display ...........................................................................................................3-2

3-1-1 Video Display ........................................................................................3-2

3-1-2 RGB Display .........................................................................................3-9

3-1-3 Changing the Video Board Field Setting ............................................3-12

3-2 Video Capture ...............................................................................................3-15

3-3 Console Connection ......................................................................................3-17

3-4 Settings and Adjustments..............................................................................3-19

3-4-1 System Settings..................................................................................3-19

3-4-2 Video Configuration ............................................................................3-20

3-4-3 Contrast Adjustor Settings ..................................................................3-24

3-4-4 RGB Configuration..............................................................................3-25

3-4-5 Video Display Control .........................................................................3-28

Appendices

Appendix 1 Specifications ................................................................................... A-2

A-1-1 General Specifications......................................................................... A-2

A-1-2 General Specifications......................................................................... A-2

Appendix 2 Pin Arrangement .............................................................................. A-3

Appendix 3 Dimensions....................................................................................... A-4

Appendix 4 Comparison to NS-CA001 Video Input Unit..................................... A-5

About this Manual

Section 1 Overview

Provides an outline of the RGB and Video Input Unit, including its features and system

configuration.

Section 2 Installing the RGB and Video Input Unit

Describes the nomenclature and functions of each part, the procedure for installing the RGB and

Video Input Unit on a PT, and the procedure for connecting external devices to the Unit.

Section 3 RGB and Video Input Unit Functions

Describes the functions available when using an RGB and Video Input Unit along with the setting

and adjustment procedures required for its operation.

Appendices

Provides hardware specifications, dimensions, and NS-CA001 comparison information.

WARNING Failure to read and understand the information provided in this

manual may result in personal injury or death, damage to the

product, or product failure. Please read each section in its entirety

and be sure you understand the information provided in the section

and related sections before attempting any of the procedures or

operations given.

Related Manuals

The following manuals are used for NS-series PTs. (The boxes at the end of the

catalog numbers indicate the revision code.)

●NS Series -V1/-V2 Setup Manual .............................................V083-E1-

Provides information on NS-V1/-V2 Series models (i.e., the NS15-V2,

NS12-V1/-V2, NS10-V1/-V2, NS8-V1/-V2, and NS5-V1/-V2).

Describes how to connect the PT to the host and peripheral devices, methods to

set up communications and operation, and procedures for maintenance.

Refer to the NS Series Programming Manual (V073) for information on PT

functions and specific operating procedures.

Refer to the CX-Designer User’s Manual (Cat. No. V088) for the CX-Designer

Installation procedure and an overview of the CX-Designer, and refer to

CX-Designer online help for detailed operating procedures.

●NS Series Setup Manual...........................................................V072-E1-

Provides information on NS Series models (i.e., the NS12, NS10, and NS7).

●NS Series Programming Manual .............................................V073-E1-

Describes the screen configurations, object functions, and host communications

for the PT.

●CX-Designer User’s Manual.....................................................V088-E1-

Describes the CX-Designer, which is used to create and transfer the screens

displayed on the NS-series PTs. This manual provides the installation procedure

for the CX-Designer and describes the features of the CX-Designer. Refer to the

online help in the CX-Designer for CX-Designer operating procedures.

Terminology

The following terminology is used in this manual.

PT In this manual, indicates a Programmable Terminal in

OMRON’s NS Series of Programmable Terminals.

NS Series Indicates products in OMRON’s NS@@ Series of

Programmable Terminals.

Unless otherwise specified, the information in this manual

applies to the NS@@ Series.

Introduction

Thank you for purchasing an RGB and Video Input Unit for the NS-series PT.

The RGB and Video Input Unit is an Expansion Unit that is installed on an NS-series

Programmable Terminal (PT) to display RGB signals from analog signal output devices,

such as personal computers, or pictures from devices such as video cameras and

Vision Sensors.

Refer to the NS Series Setup Manual, the NS Series Programming Manual, the

CX-Designer Operation Manual, and CX-Designer online help for details on the

functions and performance of the PT.

●Intended Audience

This manual is intended for the following personnel, who must also have knowledge of

electrical systems (an electrical engineer or the equivalent).

Personnel in charge of introducing FA systems into production facilities

• Personnel in charge of designing FA systems

• Personnel in charge of installing and connecting FA systems

• Personnel in charge of managing FA systems and facilities

●Notice

This manual provides information for connecting and setting up an RGB and Video

Input Unit for the NS-series PT. Be sure to read this manual before attempting to use

the Unit and keep this manual close at hand for reference during installation and

operation.

●General Precautions

• The user must operate the product according to the performance specifications

described in the operation manuals.

• Do not use the PT touch switch input functions for applications where danger to

human life or serious property damage is possible, or for emergency switch

applications.

• Before using the product under conditions which are not described in the manual

or applying the product to nuclear control systems, railroad systems, aviation

systems, vehicles, combustion systems, medical equipment, amusement

machines, safety equipment, and other systems, machines and equipment that

may have a serious influence on lives and property if used improperly, consult

your OMRON representative.

• Make sure that the ratings and performance characteristics of the product are

sufficient for the systems, machines, and equipment, and be sure to provide the

systems, machines, and equipment with double safety mechanisms.

• This manual provides information for connecting and setting up an NS-series PT.

Be sure to read this manual before attempting to use the PT and keep this manual

close at hand for reference during installation and operation.

●Safety Precautions

Do not attempt to take the Unit apart and do not

touch any internal parts while the power is being

supplied. Doing either of these may result in

electrical shock.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Touch-Terminal Handbücher

Omron

Omron NP Series Bedienungsanleitung

Omron

Omron NA5-15*101 series Benutzerhandbuch

Omron

Omron NB3Q-TW**B series Installations- und Betriebshandbuch

Omron

Omron NT11 - 01-2004 Bedienungsanleitung

Omron

Omron NB-series Gebrauchsanweisung

Omron

Omron DeviceNet DRT2-AD04 Bedienungsanleitung

Omron

Omron NV3W Series Gebrauchsanweisung

Omron

Omron NP3 Series Referenzhandbuch

Omron

Omron Programmable Terminals NT31 NT31C Benutzerhandbuch

Omron

Omron NA5-12W series Gebrauchsanweisung

Omron

Omron NS - HOST Gebrauchsanweisung

Omron

Omron NT2S-SF122B-E START V1.03 Gebrauchsanweisung

Omron

Omron NS - Benutzerhandbuch

Omron

Omron NS7 Series Benutzerhandbuch

Omron

Omron NT600M Series Bedienungsanleitung

Omron

Omron NXR-ILM08C-EIT Bedienungsanleitung

Omron

Omron NT11 - 01-2004 Bedienungsanleitung

Omron

Omron NT21 Bedienungsanleitung

Omron

Omron NT30C-ST141-E Bedienungsanleitung

Omron

Omron NT2S-SF121B-E - Gebrauchsanweisung

Omron

Omron NB-series Bedienungsanleitung

Omron

Omron NSH5 Series Bedienungsanleitung

Omron

Omron NXR Series Bedienungsanleitung

Omron

Omron NB-series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung

Prestel

Prestel VCS-G2PRO Bedienungsanleitung