Onkyo HT-R695 Installationsanleitung

Basic Manual

Hookup

Step1: Conect the Speakers ....................................................3

Step2: Connect the TV ............................................................5

Step3: Connect the AV Components .......................................7

Step4: Multi-zone Connection ...............................................10

Step5: Connect Other Cables ................................................11

Setup

Step6: Power On & Initial Setup ............................................12

HDMI Setup ...........................................................................13

Playback

Basic Playback ......................................................................14

Network Functions .................................................................15

Others ....................................................................................17

Part Names

Front Panel ............................................................................19

Rear Panel ............................................................................20

Remote Controller .................................................................21

Display ...................................................................................21

The Basic Manual includes information needed when starting up and

also instructions for frequently used operations. The Advanced Manual

has more detailed information and advanced settings.

AV RECEIVER

HT-R695

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

What's in the box

1. Main unit 2. Remote controller (RC-911R)

×1, Batteries (AAA/R03) ×2

3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1

Main features

This unit is connected between your TV and your AV components. To play, select the source with the input

selector. This unit is equipped with 7ch at 170 W (6 ohms, 1 kHz, 0.9%THD) (North American models) / 160 W

(6 ohms, 1 kHz, 1%THD) (European, Australian and Asian models) per channel plus pre out jack for powered

subwoofer.

$Supports playback in Dolby Atmos format which provides 360e sound placement

$The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2

$HDMI CEC functionality: Control features such as linking input switching with the input selector and players

conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-

compliant TV, and automatically switching this unit to standby when the TV is turned off

$HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this

unit is in standby

$ARC: Connection with an ARC-compatible TV is complete with one HDMI cable

$Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV

$Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server

that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and

BLUETOOTH

play

$Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source

$Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2)

$We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our

website for more information.

Before start

CAUTION: Connect speakers with 6 Ω to 16 Ω impedance. The power cord must be connected only after

all other cable connections are completed.

0We will not accept responsibility for damage arising from the connection of equipment manufactured by

other companies.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step1: Conect the Speakers

Dolby Enabled Speakers (Front)

Center Speaker

Surround Speakers

Powered Subwoofer

Speaker Layout for 5.1.2-

Channel System

Dolby enabled speakers (front) are front speakers with

height speakers on top, designed to face the ceiling so

that height speaker sound is heard after bouncing off the

ceiling so that sound appears to be coming from

overhead. You can experience the Dolby Atmos listening

mode (5.1.2 channel playback), which realizes the most

up-to-date 3D sound including overhead sounds, when

the input audio format is Dolby Atmos.

Dolby enabled speakers (front) speakers should be set up

at ear height and the center speaker should be set up

facing the listening position. The optimal positioning for

surround speakers is just above ear height. Place the

powered subwoofer towards the front. Placing it between

the center speaker and a front speaker gives you a

natural sound even when playing music.

0The front speakers, center speaker, and surround

speakers are counted as 5 channels, the powered

subwoofer is counted as 0.1 of a channel, and the

height speakers are counted as 0.0.2 of a channel,

giving us a 5.1.2ch system.

＊1: 22e to 30e, ＊2: 120e

Hookup

＊1

＊2

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

1/2˝

(12 mm)

1 Speaker cable, 2 Subwoofer cable

Connections for 5.1.2-

Channel System

Connect 123456. 2 speaker cables are required to

connect each of speakers 1 and 2. Use one speaker

cable for the other speakers' connection. Up to two

powered subwoofers can be connected. The same signal

is output from each of the SUBWOOFER jacks.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step2: Connect the TV

HDMI IN (ARC)

1 HDMI cable

if you have:

ARC TV

This unit is connected between your TV and AV

components. If you connect two or more AV components,

you can select the video displayed on the TV and the

audio output from this unit by changing the input selector.

Shown here are the connections for a TV that supports

the ARC (Audio Return Channel) feature. By connecting

with a single HDMI cable, you can not only output the

video input to this unit to the TV, but you can also play the

sound from the TV through this unit.

Choose an HDMI IN jack on the TV that supports ARC

when connecting.

Another TV or projector can be connected to the HDMI OUT SUB

jack. This jack does not support ARC. For details about how to

output video from the HDMI OUT SUB jack (P14)

Setup

0Settings are required to use the ARC function.

Select "Yes" in "5. Audio Return Channel" (



P13)

in the Initial Setup.

0Please refer to the TV's operation manual for

directions on connections and setup for the TV.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

1 HDMI cable, 2 Digital optical cable

if you have:

Non-ARC TV

This unit is connected between your TV and AV

components. If you connect two or more AV components,

you can select the video displayed on the TV and the

audio output from this unit by changing the input selector.

This describes the connections for a TV that does not

support the ARC (Audio Return Channel) feature. By

connecting with both an HDMI cable and a digital optical

cable, you can not only output the video input to this unit

to the TV, but you can also play the sound from the TV

through this unit.

If the TV doesn't have a DIGITAL OPTICAL OUT jack, use

an analog audio cable and connect the TV's ANALOG

AUDIO OUT jack to the AUDIO IN TV jack on this unit.

0Connection with a digital optical cable is not necessary

if you will watch TV through a device such as a cable

set-top box (that is, not use a tuner built into the TV)

that you have connected to the INPUT jack on this unit.

Another TV or projector can be connected to the HDMI OUT SUB

jack. This jack does not support ARC. For details about how to

output video from the HDMI OUT SUB jack (P14)

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step3: Connect the AV Components

BD/DVD

GAME

Cable/Satellite set-top

box

Streaming media

player

1 HDMI cable

if you have:

HDMI AV Components

This is an example of connection with an AV component

that has an HDMI jack. With connection to an AV

component that conforms with the CEC (Consumer

Electronics Control) standard, you can use features such

as the HDMI CEC feature that links with the input selector,

and the HDMI Standby Through feature which allows you

to play video and audio from AV components on the TV

even when this unit is in standby mode.

0To play 4K or 1080p video, use a high speed HDMI

cable. Further, to enjoy HDCP2.2 compatible video,

connect to the HDMI IN1 to IN3 jacks.

You can connect a device such as a video camera to the AUX

INPUT HDMI jack on the front panel.

Setup

0HDMI setup (



P13) is required to use the HDMI

CEC and HDMI Standby Through features. Make

settings after all connections are complete.

0To enjoy digital surround sound including Dolby

Digital, audio output should be set to "Bitstream

output" on the connected Blu-ray Disc player or

other device.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

BD/DVD

1 Component video cable, 2 Digital coaxial cable, 3 Analog audio cable

if you have:

Non-HDMI AV Components

This is an example of connection with an AV component

that does not have an HDMI jack. Make the connections

to the AV component to match the jacks it has. When

video input connection is to the BD/DVD jack, the audio

input connection should also be to the BD/DVD jacks, and

so on, so that you connect the video input jacks to the

jacks with the same name as the audio input jacks. Note

that video signals input to the VIDEO IN jack or the

COMPONENT VIDEO IN jacks will be converted to HDMI

video signals and then output from the HDMI OUT jack.

0To enjoy digital surround playback in formats such as

Dolby Digital, you need to make a connection for audio

signals with a digital coaxial cable or digital optical

cable.

0It is possible to change assignment of the input jacks

you see in the illustration at left, so you can also

connect to any jack other than BD/DVD. For details,

see the Advanced Manual.

Setup

0The COMPONENT VIDEO IN jacks are

compatible only with 480i or 576i resolution. When

you input video signals to the COMPONENT

VIDEO IN jacks, set the output resolution of the

player to 480i or 576i. Select interlace if there is no

option for 480i, etc. If your player does not support

480i or 576i output, use the VIDEO IN jack.

0To enjoy digital surround sound including Dolby

Digital, audio output should be set to "Bitstream

output" on the connected Blu-ray Disc Player or

other device.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Turntable

1 Digital optical cable, 2 Analog audio cable

if you have:

Audio Components

Example of a connection with an audio component.

Connect a CD player using a digital optical cable or

analog audio cable. You can also connect a turntable that

has an MM-type cartridge to the PHONO jack.

0If the turntable has a built-in audio equalizer, connect it

to an AUDIO IN jack other than the PHONO jack.

Further, if the turntable uses an MC type cartridge,

install an audio equalizer compatible with the MC type

cartridge between the unit and the turntable, then

connect to any AUDIO IN jack other than the PHONO

jack.

If the turntable has a ground wire, connect it to the GND terminal

of this unit.

> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Step4: Multi-zone Connection

ZONE2 LINE OUT

ZONE SPEAKER

ZONE2

MAIN ROOM

LINE

BD/DVD

1 Digital coaxial cable, 2 Analog audio cable, 3 Speaker cable

ZONE 2 LINE OUT /

ZONE SPEAKER

You can enjoy audio in the separate room by, for example,

playing a Blu-ray Disc player in the main room (where this

unit is located) and listening to internet radio in the

separate room (ZONE 2).

Connections with an AV component

When outputting the audio of an external AV component

to ZONE 2, you need to connect using an analog audio

cable or digital optical cable, or digital coaxial cable.

ZONE 2 LINE OUT

It is possible to play 2 ch source in a separate room while

5.1.2 ch source is being played in the main room.

Connect the ZONE 2 LINE OUT jacks of the unit and the

LINE IN jacks of the pre-main amplifier in a separate room

with an analog audio cable.

ZONE SPEAKER

It is possible to connect speakers in a separate room and

play 2 ch sources.

0During ZONE 2 playback, no sound is heard from the

height speakers and a maximum of 5.1 channel

playback is possible in the main room. Listening modes

such as the Dolby Atmos modes cannot be selected.

Setup

0Settings are required in Initial Setup, "4. Multi

Zone Setup" (



P13) to enjoy this feature.

0The audio from externally connected AV

components can only be played in ZONE 2 when

the audio is analog or 2ch PCM audio. If you have

connected to this unit with a digital coaxial cable or

digital optical cable, may be necessary to convert

the audio output of the AV component to PCM

output.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Onkyo Empfänger Handbücher

Onkyo

Onkyo HT-RC260 B Bedienungsanleitung

Onkyo

Onkyo HT-R370(B)(S) Bedienungsanleitung

Onkyo

Onkyo TX-RZ630 Handbuch

Onkyo

Onkyo HT-R558 Bedienungsanleitung

Onkyo

Onkyo TX-NR1010 Installations- und Betriebshandbuch

Onkyo

Onkyo TX-NR838 Bedienungsanleitung

Onkyo

Onkyo TX-NR509 Bedienungsanleitung

Onkyo

Onkyo TX-NR757 Bedienungsanleitung

Onkyo

Onkyo HT-R530 Bedienungsanleitung

Onkyo

Onkyo TX-SR508 Bedienungsanleitung

Onkyo

Onkyo TX-SR504E Bedienungsanleitung

Onkyo

Onkyo HT-RC660 Installationsanleitung

Onkyo

Onkyo TX-SR403 Bedienungsanleitung

Onkyo

Onkyo SKR-3600 Bedienungsanleitung

Onkyo

Onkyo TX-NR828 Bedienungsanleitung

Onkyo

Onkyo tx-sr577b Bedienungsanleitung

Onkyo

Onkyo TX-SR313 Bedienungsanleitung

Onkyo

Onkyo TX-NR838 Installationsanleitung

Onkyo

Onkyo TX-DS696 Bedienungsanleitung

Onkyo

Onkyo TX-8511 Bedienungsanleitung

Onkyo

Onkyo TX-DS747 Bedienungsanleitung

Onkyo

Onkyo HT-R593 Installationsanleitung

Onkyo

Onkyo TX-RZ920 Installationsanleitung

Onkyo

Onkyo TX-NR609 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung