OPODEE E31B Bedienungsanleitung
Robotic 9acuum &leaner
Instruction Manual
SHENZHEN ZAPADOS TECHNOLOGY CO.,LTD
Email:[email protected]
www.opodee.com
Service support:
Important Safety Instructions
To reduce the risk of injury or damage, read these safety instructions carefully and
keep them at hand when setting up, using, and maintaining this device.
WARNING SYMBOLS USED
This is the safety alert symbol. This symbol alerts you to
potential hazards that could result in property damage and/or
serious bodily harm or death.
• This device can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of this
device in a safe way and understand the hazards involved.
• Children should be supervised to ensure they do not play with this device.
• Cleaning and maintenance shall not be performed by children without adult
supervision.
• This device is only to be used with the power supply unit provided.
• For the purposes of recharging the battery, only use the detachable power supply
unit provided with this device.
• The battery must be removed from this device before this device is disposed of. To
remove the battery from this device, first remove the screws on the bottom, then
remove the battery by disconnecting the quick connector.
• The used battery should be placed in a sealed plastic bag and disposed of safely
according to local environmental regulations.
• The external flexible cable or cord of the power supply unit cannot be replaced; if the
cord is damaged, the power supply unit shall be disposed of.
• This device is for indoor use only.
• This device is not a toy. Do not sit or stand on this device. Small children and pets
should be supervised when this device is operating.
• Store and operate this device in room temperature environments only.
• Clean with a cloth dampened with water only.
• Do not use this device to pick up anything that is burning or smoking.
• Do not use this device to pick up spills of bleach, paint, chemicals, or anything wet.
• Before using this device, pick up objects like clothing and loose paper. Lift up cords
for blinds or curtains, and move power cords and fragile objects out of the way. If
this device passes over a power cord and drags it, an object could be pulled off a
table or shelf.
• If the room to be cleaned has a balcony, a physical barrier should be used to prevent
access to the balcony and to ensure safe operation.
• Do not place anything on top of this device.
• Be aware that this device moves around on its own. Take care when walking in the
area where this device is operating to avoid stepping on it.
• Do not operate this device in areas with exposed electrical outlets on the floor.
• Do not expose the electronics of this device, its battery, or the integrated Charging
Base. There are no user-serviceable parts inside.
• Do not use this device on an unfinished, unsealed, waxed or rough floor. It may
result in damage to the floor and this device. Use only on hard floor surfaces or low-
pile carpet.
• This device has been designed to be used on floors without scratching them. We
still recommend that you test this device on a small area of the room to be cleaned
to ensure no scratches are made before cleaning the whole room.
NoticeThis symbol on the device or its packaging indicates: Do not dispose of
electrical appliances as unsorted municipal waste; use separate collection
facilities. Contact your local authority for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the groundwater and get into
the food chain, damaging your health and well-being. When replacing old
appliances with new ones, the retailer is legally obliged to take back your old
appliance for disposal at least free of charge.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement
1
Contents
Product Composition / Package Contents 3
Product Composition / Part Name 4
Product Usage / Preparation 6
Product Use/ Charge Robot 7
Product Use / Turn On / Turn Off 8
Product Use / Start Pause, Wake up 8
Product Usage / Select a Cleaning Mode 9
Component Use the Boundary Strip 11
Component Time Scheduling Setting 11
Component Cleaning and Maintenance 12
Product Parameter 17
Troubleshooting 16
Product Composition / Package Contents
3
Charging Base Dust Box
Side Brush x4
Remote Control (with battery x2)
Robot
Cleaning Brush
Mopping Pad x2
Instruction Manual
Power Adapter
HEPA Filter x2 Boundary Strips
3.3 ft/1 m length Cable Ties x5
Water Tank
Product Composition / Part Name
Front Robot Back Robot
4
Cleaning / Power ON/OFF Button
Bumper
Recharge Button
* Short press to recharge/pause
* Hold for 3 seconds to connect Wi-Fi
* Press and hold for 3 seconds to turn on/off
* Short press to start sweeping/puase
Rolling Brush
Side Brush
Drop Sensor
Surface Cover
Infrared sensor
Battery Compartment
Dust Collector
Brush Guard
Charging Contact Pins
Hall Sensor
Swivel Wheel
Dust Box
Charging Base
Remote Control
Remote Control Display
5
Vent
Charging Base Pins
Schedule Auto Cleaning start time
Mode Switching:
Control cleaning direction manually
Start Auto Cleaning
Start Auto Cleaning / Mopping
Stop Cleaning
Adjust suction power level in Auto Cleaning Mode
Adjust the hour and minute
Adjust time
Return to Charging Base
Spot Cleaning Mode
Single Room Cleaning Mode
Edge Cleaning Mode
1
1
44
5
5
6
6
7
7
2
2
3
1
2
3
Schedule cleaning time
Strong suction power
Standard suction power
Auto Cleaning / Mopping Mode
Time Setting
Returning to Charging Base
Clock
Single Room cleaning Mode
Edge Cleaning Mode
Spot Cleaning Mode
1
4
5
6
8
7
9
10
2
3
7
9
3
10 8
65
4
Install 2 AAA batteries before using the remote control for the first time. Make sure
The positive and negative ends are facing the correct polarity direction as marked in
The battery compartment.
T
DC Socket
Water Tank and Mopping Pad Assembly
Mopping Pad
Power Indicator
Product Usage / Preparation
APP
Show Map
Robot Status
Schedule Auto Cleaning start time
Function Select (Slide left or right to select more)
Auto cleaning
Recharge mode
Room cleaning
Edge cleaning
Spot cleaning
Positioning of robot
Cleaning record
Control cleaning direction manually
Battery status
Adjust suction power level in Auto Cleaning Mode
Edit Device info
1
4
5
6
7
8
2
3
Important Tips Before Use
Remove power cords and small objects from the floor that may entanglHRobot. You
can use the supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling Robot. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02in/26mm as they
may cause Robot to malfunction.
Keep Robot away from spaces lower than 2.87in/73mm to prevent Robot from
getting stuck. If necessary, place a physical barrier to block off the problem areas.
Keep Robot away from wet areas.
Robot may climb on top of objects less than 0.63 in/16 mm in height. Remove these
objects if possible.
Anti-drop sensors prevent Robot from tumbling down stairs and steep drops. They
may work less effectively if dirty or used on reflective/very dark-colored floors. It is
recommended to apply the Boundary Strip(s) to block off areas where Robot may fall.
Place physical barriers or Boundary Strips in front of fireplaces and areas that
may cause damage to Robot if entered.
a
d
b
e
c
f
f
e
d
c
b
a
T
1
2
4
3
5
7
6
8
Remove Protection
Before using the Robot, remove the protective strip
on the Robot.
Install the side brushes before use, please make sure the
mark of the side brush,if “L”, please install it at the position
marked “L” on the machine. 7he other side is the same “R”.
1
24
3Place the Charging Base on a hard, horizontal surface and
against a wall.
Remove objects within 3 ft/1 m on both sides and
within 6 ft/2 m in front of the charging base.
6ft/2m
3ft/1m 3ft/1m
67
5
6
Plug the adapter into the a wall outlet and pulg the DC jack
into the DC socket of the Charging Base.
3ft/1m
When the Charging Base connects to AC power, the LED
indicator on the Charging Base is flashing green.
Install the Charging Base in a location that Robot
can easily access. Please place the Charging Base
against a wall, and on a hard-level surface rather
than on rugs or carpets.
- Always keep the Charging Base plugged in,
otherwise Robot will not automatically return to it.
Power on and Charge Your Robot 7Download the mobile phone APP
If the battery is low, the robot will not turn on .Please
refer to “Method 2”
The power of the robot should be >30% before it can work.
Method 1
T
T
Please pay attention to
align the robot with the
charging electrode plates.
T
please refer to “Quick Start Guide” to configure the network.
T
Place the robot on the charging dock and align it with the
charging electrode plates. The power indicator on the robot
is flashing green
Method 2
Method 1
Method 2
Search”Smart Life ”or ”Tuya smart ” in Google Play or Apple
Store,then find its APP and download it.
Press on the Robot until the indicator light on and
the “welcome to use robot vacuum cleaner” Prompt Tone
Place the Robot within one meter of the charging dock.
By tapping the Home button, the device will automatically
search for the charging dock and go to charging.
Scan the QR code below by using mobile phone to download
the APP.
Product Usage / Clean / Pause
Make sure the Robot is turned on before use.
Press on the Robot to start cleaning (press any key to
pause while cleaning).
Press on the remote control to start cleaning.
Press on the remote control to pause.
- Robot will return to the Charging Base automatically
when the battery level becomes low or when Robot
finishes cleaning.
-Turn off the Robot if it will not be used for a long period
of time. To preserve the battery’s lifespan,recharge at
least once every 6 months.
- The robot will go back to the charging base alongside
the walls in a slow pace, which may take some time
wandering. Please do not worry about it.
Method 1
Method 2
T
T
Click in the APP to start cleaning.
Click in the APP to pause the current task.
Method 3
Inhaltsverzeichnis
Andere OPODEE Staubsauger Handbücher
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
