Opticis AVFX-100TR Bedienungsanleitung

User’s Manual

AVFX-100TR

www.opticis.com

Optical VGA/Audio/RS-232

Extender

Manual Contents

__________________________________________

Manual Contents 1-0

Welcome, Product Description 1-1

System Requirements for Setup 1-2

Installation 1-3

RS-232 Baud rate and AUTO Installation 1-6

Troubleshooting, Maintenance, Technical Support 1-7

Product Specifications 1-8

Warranty Information 1-9

Pictorials

Figure 1 –Overall Digital Video/Audio and Serial I/O

Optical Extender 1-1

Figure 2 –Connection of VGA, AUDIO, RS232 Cable

to Transmitter Module 1-2

Figure 3 –Connection of Receiver Module 1-3

Figure 4 –Connection of Two (2) Duplex LC Optical

Fibers 1-4

Figure 5 –Connection of AC/DC Power Adaptor 1-5

1- 0 Manual Contents

Welcome!

Congratulations on your purchase of the AVFX-100-TR, Analog Video/Audio and

Serial I/O optical extender. This manual contains information that will assist you

in installing and operating the product.

Product Description

AVFX-100-TR offers integrated extension of Analog video, audio and RS-232

interface up to 2km (6,560feet) over single-mode or 300m (985feet, 50m) over

multi-mode. It maintains video signals up to UXGA (1600x1200) at 60Hz refresh

rate for PC. It is compatible with full DDC2B. RS232 serial interface offers

device-to-device and device-to-controller connections to build up control system

for A/V integration.

It is designed to multiplex and de-multiplex Analog video, analog audio DDC

command interface, HDCP and serial protocol so as to be linked over 4 LC

fibers. It gives benefits of all-glass fiber transmission medium, data security, long

distance extension up to 2km, easy plug-and-go installation and no RFI/EMI

effects. In addition, a non-trivial feature is that both of Single and Multimode

optical fibers are applicable.

Shipping Group of AVFX-100-TR Analog Video/Audio and RS232 optical extender

Tx and Rx boxes: One Transmitter module & One Receiver module.

AC/DC power adapter: Two (2) +5V/3A units

User’s Manual

Option: Duplex LC Patch Cord (single mode or multi-mode glass fiber).

Figure 1 –Overall Digital Video/Audio and Serial I/O Optical Extender

1-1 Welcome, Product Description

System Requirements for Setup

Hardware requirements

You have a graphic controller card with a DVI port in your

Windows/Mac (Mac is option), or SUN system. It should support

the maximum graphic resolution feature of the display to be

connected.

In case of using a computer, no special memory size, CPU

speed and chipsets are required.

Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to install with

the optical link.

Software requirements

No special needs, if the DVI graphic controller and display

peripheral are operational with the platform’s OS and

application.

AC/DC Power Adapter Technical Advisory

The power of AVFX-100-TR is designed to supply to each module of

Transmitter and Receiver modules by plugging to each of the power

plugs.

1-2 System Requirements for Setup

Installation

Important: Please use the installation procedure below. Improper or no

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents of the shipping group.

Step 2

With system power turned off, connect the Transmitter module to the VGA D-

sub of PC or other video source equipment by a VGA copper cable. If

necessary, connect the RS232 cable plugs to each D-sub 9-pin connector on

PC and Transmitter module. Also if you use a Local monitor, connect HD-15

VGA connector.

Step 3

Connect the Transmitter module to the audio source equipment by audio

cables such as Stereo Phone Jack.

Figure 2 –Connection of VGA, AUDIO, RS232 Cable to Transmitter Module

1-3 Installation

Step 4

In the same way as above, connect the Receiver module to the display by

VGA copper cable and to the audio output equipments such as media

receiver or speaker by audio cable. The RS232 devices near the display can

be connected by RS232 copper cable also.

Figure 3 –Connection of Receiver Module

Step 5

Remove dust covers and connect two (2) duplex LC fibers to LC receptacles

of the Transmitter and Receiver modules, as shown in Fig. 4. Carefully ensure

the duplex LC connector is fully engaged.

Figure 4 –Connection of Two (2) Duplex LC Optical Fibers

1-4 Installation (continued)

Notice: Please DO NOT look directly into the LC receptacles of Uplink

module, while they are powered on, although they are regulated strictly

enough to operate under the Laser Class 1, classified by CDRH/FDA for eye

safety.

Step 6

Connect an AC/DC power adapter to both Transmitter and Receiver modules

as your availability of AC outlets. You can find power indication LED lit on in

the both modules.

Figure 5 –Connection of AC/DC Power Adapter

Step 7

PowerpON the PC and display or connected RS-232 devices. Ensure

“POWER”, “VIDEO”and “AUDIO”indication LED lit ON, representing secure

connection of LC duplex fibers and all kinds of cables. If the cables are

connected incorrectly, the LINK ERR LED lit on.

Tip 1: If any status LED is not ON normally after all installation as guided in

the above, we recommend you to push “RESET”button while all connections

are set and the Transmitter and Receiver modules are powered in.

Tip 2: Avoid “hot plugging” the Uplink as this is not recommended practice

with live digital voltages.

1-5 Installation

RS-232 Baud rate and AUTO Installation

The Tx,Rx Baud rate is installed with switch 1,2,3.(switch 4 is only Auto function)

Setting “1”

Setting “0”

[Baud rate switch diagram] - Black is the switch’s position

Baud rate

Switch setting

9600

14400

19200

38400

57600

115200

128000

256000

AUTO mode

none

*Auto mode: If you want to use this function, please set the switch as above, and

then push the “AUTO”button on the Tx. It can help refine display quality.

We recommend you push the button when you finish the set up.

1-6 RS-232 Baud rate and AUTO Installation

Product Specifications

AVFX-100-TR Analog Video/Audio and Serial I/O Optical Extender

Compliance with VGA standard: supports using fiber-optic

communication links and DDC2B.

Extension limit: 2km (6,560feet) over two (2) single-mode fibers

300m (986feet) over two (2) single-mode fibers

Audio: Stereo Phone Jack

RS232C: supports D-sub 9 Pin connectors for RS232C.

Fiber-optic Connection: The transmitter and receiver boxes of

AVFX-100-TR have two (2) duplex LC receptacles connected to two

(2) duplex Single Mode or Multi Mode optical patch cords.

Mechanical specifications of Transmitter and Receiver boxes

Dimensions: 220mm / 140mm / 40mm (W/H/D)

Weight: 460 10.0 gram for each of Transmitter and Receiver.

Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: - 10°C to 85°C

Humidity: 5% to 85%

AC/DC Power Adapter

Power Output: +5V, 3.0 A SMPS DC-power Adapter

Cord DC Jack: Core is 5 V and outer cylinder is GND.

Support Resolution

Pixel Format

Refresh Rate Pixel Format Refresh Rate

800x600 56.0 1280x768 85.0

800x600 60.0 1280x800 60.0

800x600 72.0 1280x960 60.0

800x600 75.0 1280x960 85.0

800x600 85.0 1280x1024 60.0

1024x768 60.0 1280x1024 75.0

1024x768 70.0 1280x1024 85.0

1024x768 75.0 1360x768 60.0

1024x768 85.0 1400x1050 60.0

1152x864 75.0 1400x1050 75.0

1280x768 60.0 1440x900 60.0

1280x768 75.0 1600x1200 60.0

1-8 Product Specifications

Troubleshooting

The display displays only black screen.

Check that all AC and DC plugs and jacks used by external power

supplies (both Opticis and others) are firmly connected.

Ensure that power LED lit ON.

Ensure that the Transmitter and Receiver modules connected

correctly to the PC and display, respectively.

Check if the PC and display are powered on and properly booted.

Reset the AVFX-100-TR using Reset button on Uplink and Downlink

modules.



Re-boot up the system after reconnecting the LC optical fibers.

Screen is distorted or displays noises.

Check if the graphic resolution is properly set. Go to the display

properties and tap the settings.

Reset the AVFX-100 using Reset button on Transmitter and Receiver

modules.

Push “AUTO” button

※For more details, please see the 1-6 chapter.

Reset the system.

Power down, disconnect and reconnect the LC optical fiber or DC

power adaptors, and power up.

Maintenance

No special maintenance is required for this product. Ensure that this product

is stored or used in a benign environment free from liquid or dirt

contamination.

There are no user serviceable parts. Refer all service and repair issues to

Opticis or its authorized distributor.

Technical Support and Service

For commercial or general product support, contact your reseller. For

technical service, contact Opticis by email techsup[email protected] or visit its

website at www.opticis.com.

1-7 Troubleshooting, Maintenance, Technical Support

Revision 1.0

Opticis Locations

Opticis Co., Ltd.

#304 Byucksan Technopia

434-6 Sangdaewon-Dong, Chungwon-Ku

Sungnam City, Kyungki-Do

462-120, South Korea

Tel: +82 (31) 737-8033

Fax: +82 (31) 737-8079

For order support, please contact your Distributor or Reseller.

For technical support, check with the Opticis web site www.opticis.com or

contact techsupp@opticis.com

Warranty Information

1 (One) Year Warranty

Opticis warrants this Digital Video/Audio and Serial I/O Optical Extender to be

free from defects in workmanship and materials, under normal use and

service, for a period of one (1) year from the date of purchase from Opticis or

its authorized resellers.

If a product does not work as warranted during the applicable warranty period,

Opticis shall, at its option and expense, repair the defective product or part,

deliver to customer an equivalent product or part to replace the defective item,

or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of Opticis.

Replacement products may be new or reconditioned.

Any replaced or repaired product or part has a ninety (90) day warranty or the

reminder of the initial warranty period, whichever is longer.

Opticis shall not be responsible for any software, firmware, information, or

memory data of customer contained in, stored on, or integrated with any

products returned to Opticis for repair under warranty or not.

Warranty Limitation and Exclusion

Opticis shall have no further obligation under the foregoing limited warranty if

the product has been damaged due to abuse, misuse, neglect, accident,

unusual physical or electrical stress, unauthorized modifications, tampering,

alterations, or service other than by Opticis or its authorized agents, causes

other than from ordinary use or failure to properly use the product in the

application for which said product is intended.

Dispose of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate systems)

This symbol on the product or on its packaging indicates that this

product shall not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

1-9 Warranty Information

Inhaltsverzeichnis

Andere opticis Extender Handbücher

opticis

opticis M5-2A2-TR Bedienungsanleitung

opticis

opticis DPFX-700-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis HDFX-200-TR Bedienungsanleitung

opticis

opticis Stretch DVI M1-201SA-TR Bedienungsanleitung

opticis

opticis M5-2C2 Bedienungsanleitung

opticis

opticis DPFX-300-TR Bedienungsanleitung

opticis

opticis DPFX-250-TR Bedienungsanleitung

opticis

opticis M5-1001 Bedienungsanleitung

opticis

opticis M1-203D-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis IPKVM-350ED Bedienungsanleitung

opticis

opticis M5-1002 Bedienungsanleitung

opticis

opticis HDCX-100-TR Bedienungsanleitung

opticis

opticis Stretch DisplayPort DPC-MP14-TR Bedienungsanleitung

opticis

opticis M5-2C2-TR Bedienungsanleitung

opticis

opticis Stretch DVI DDFX-100-TR Bedienungsanleitung

opticis

opticis HDFX-150-TR Bedienungsanleitung

opticis

opticis DPFX-200-TR Bedienungsanleitung

opticis

opticis DVI/USB/RS-232 and Audio Optical Extender Bedienungsanleitung

opticis

opticis HDFX-250-TR Bedienungsanleitung

opticis

opticis DPFX-1F14-TR Bedienungsanleitung

opticis

opticis M5-1003 Bedienungsanleitung

opticis

opticis HDFX-700-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

opticis AVFX-100TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken