Opticis DPFX-700-TR Bedienungsanleitung

Manual Contents

__________________________________________

Manual Contents

1-0

Welcome! Product Description

1-1

System Requirements for Setup

1-2

Installation

1-3

Troubleshooting, Maintenance, Technical Support, and Service

1-5

Product Specifications

1-6

Warranty Information

1-7

Certifications

1-8

Pictorials

Figure 1 –Overall Connection of DPFX-700-TR

1-1

Figure 2 –Position of the LED

1-3

Figure 3 –Connection of optical fiber

1-4

1-0 Manual Contents

User’s Manual

DPFX-700-TR

Preliminary

Doc No. : OE-DP210119 / V0.9

One (1) Fiber DisplayPort 1.2

Optical Detachable Extender

With Copper Extension

Welcome!

Congratulations on your purchase of the one (1) fiber DisplayPort extender

with copper extension, DPFX-700-TR. This manual contains information that

will assist you in installing and operating the product.

Product Description

DisplayPort 1.2 one(1) fiber optic detachable extender, DPFX-700, extends

DisplayPort 1.2 signal up to 200m (656feet) and transmits 4K UHD

(4096x2160) at 60Hz over one(1) LC multi-mode fiber. Cutting-edge

technology of Opticis reduces limits in installation by providing an option for

longer copper extension.

DPFX-700-TR transmit uncompressed and transparent data signal even when

used with up to 2 m copper cable as an intermediary. This enables installation

of the product in the limited spaced area in such our small module type

extender cannot be used. 2m copper cable is provided in the shipping group.

Furthermore, to meet all the needs of the customers, DPFX-700-TR is fully

compatible with using DPFX-300 as a pair. Depending on the circumstances,

customer can choose to use direct connection type module on one side, and

copper extension type module on the other side.

DPFX-700-TR gives slim, light, and easy installation with perfect electrical

isolation, but without electrical hazard and interference. It is operated external

DC power adapter which is supplied in the shipping group.

Figure 1 –Overall Connection of DPFX-700-TR

1-1 Welcome, Product Description

System Requirements for Setup

□Hardware requirements

▪You must have a DisplayPort source and display. It should

support the maximum graphic resolution feature of displays to

be connected.

▪No special requirements of memory size, CPU speed and

chipsets, if you’ve already properly installed your DisplayPort

systems or graphic cards.

▪Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to the

installation with the optical link.

□Software requirements

▪No special restrictions, if you’ve already properly installed your

DisplayPort systems.

▪FW upgradable via micro USB port (TBD)

□Power Technical Advisory

▪Enclosed Power Adaptors should supply power for both

Transmitter and Receiver.

□Connection Advisory

▪It is highly recommended that DisplayPort source is

connected to DisplayPort display output via DPFX-700-TR

without any connection with incompatible distributor,

switcher and selector.

The Shipping Group of DPFX-700-TR;

One (1) Transmitter (Tx) and One (1) Receiver (Rx)

Two (2) 2m Male to Male DisplayPort copper cable

Two (2) 5V 1A power adapter

User’s Manual

※If the purchase was made with mixed pair of DPFX-700 and

DPFX-300, the shipping group may vary.

1-2 System Requirements for Setup

Installation

Important: Please keep the installation procedure below. Failure in

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents in the shipping group.

Step 2

Power on the DisplayPort source and display. The external power is

recommended for the stable power supply for both the transmitter and

receiver.

Step 3

The Power LED will be turned on and the Status LED will blink three (3)

times. Then the Status LED will blink again when the whole connection is

made.

Figure 2 –Position of the LED

Step 4

Connect one (1) LC optical fiber between the transmitter and the receiver.

Ensure the connectors are fully engaged and then, the top LED will begin to

blink regularly.

Step 5

Connect the transmitter and the receiver to the source and the display

respectively via 2m copper cable provided in the shipping group.

Note: If the connectors are fully engaged, the bottom LED will turn on.

1-3 Installation

Note: If DPFX-300 module is used as its pair for DPFX-700, connect DPFX-

300 module directly into the DisplayPort port on the source or display.

Fig Figure 3 –Connection of optical fiber

Step 7

If the system does not work properly, go to the page 1-5 for trouble shooting.

Note1: Please DO NOT look directly into the LC receptacles of the

Transmitter, while it is powered on. Although this product is regulated strictly

enough to operate under the LASER Class I, classified by CDRH/FDA for eye

safety, it is not recommended to do so.

Note2: The maximum extension length by OM3 fiber is 200 meters (656ft.).

Note3: It is recommended NOT to use any intermediate cable or adapter that

is not provided in the shipping group between the modules to avoid

undesirable performance degradation.

1-4 Installation

Position of the LED

Troubleshooting

The display shows black screen.

- Ensure that all the plugs and jacks used by DC power supplies are firmly

connected. Ensure that the LED is ON.

- Ensure that the DisplayPort cables are firmly plugged into the DisplayPort source

and display.

- Ensure that the transmitter and receiver modules are plugged correctly to the

source and display, respectively.

- Check if the DisplayPort source and display are powered on and properly booted.

- Reset the system by de-plugging and re-plugging the transmitter or receiver, or

by de-plugging and re-plugging the DC power adapters that are plugged to the

transmitter and receiver module.

- Re-boot up the system while connecting the module.

Screen is distorted or displays noises.

- Check if the graphic resolution is properly set. Go to the display Properties and

tap the Settings. Ensure that the resolution sets less than WQUXGA (3840x2400)

at 60Hz refresh ratio.

- Reset the system

- Power down, disconnect and reconnect the optical system cable or DC power

adaptors, and power up again.

Maintenance

No special maintenance is required for the optical system cables and power

supplies. Ensure that the cables and power modules are stored or used in a

benign environment free from the liquid or dirt contamination.

There are no user serviceable parts. Refer all service and repair issues to Opticis

or its authorized distributor.

Technical Support and Service

For commercial or general product support, contact your reseller. For technical

service, contact Opticis by email techsupp@opticis.com or visit its website at

www.opticis.com

1-5 Trouble Shooting, Maintenance, Technical Support and Service

Product Specifications

Compliance with DisplayPort standard: supports DisplayPort 1.2

Extension limit: 200m (656feet) for 4K (4096x2160) at 60 Hz

refresh rate over one (1) LC OM3 fiber (50/125um).

Graphic Transmission Bandwidth: Supports total data rate

21.6Gbps (5.4Gbps per lane).

Supports Dual-mode DP (DP++)

Extra Copper Extension available up to 2m on each side (TX/RX)

Supports auxiliary /l²C channel over fiber

Firmware upgradable via micro USB port

Support Multi-Stream Transport

Mechanical specifications of transmitter and receiver

Dimensions(WDH):39mm x 76mm x 20mm

Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: -30°C to 70°C

Humidity: 10% to 85%

AC/DC Power Adapter

Power Input: AC 100-240V, 50/60Hz.

Power Output: +5 V, 1A SMPS DC-power Adapter

LED indicator

TBD

1-6 Product Specifications

Warranty Information

1 (One) Year Warranty

Opticis warrants this optical DP module to be free from defects in workmanship

and materials, under normal use and service, for a period of one (1) year from

the date of purchase from Opticis or its authorized resellers.

If a product does not work as warranted during the applicable warranty period,

Opticis shall, at its option and expense, repair the defective product or part, deli

ver to customer an equivalent product or part to replace the defective item, or r

efund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of Opticis.

Replacement products may be new or reconditioned.

Any replaced or repaired product or part has a ninety (90) day warranty or the r

eminder of the initial warranty period, whichever is longer.

Opticis shall not be responsible for any software, firmware, information, or mem

ory data of customer contained in, stored on, or integrated with any products re

turned to Opticis for repair under warranty or not.

Warranty Limitation and Exclusion

Opticis shall have no further obligation under the foregoing limited warranty if

the product has been damaged due to abuse, misuse, neglect, accident,

unusual physical or electrical stress, unauthorized modifications, tampering,

alterations, or service other than by Opticis or its authorized agents, causes

other than from ordinary use or failure to properly use the product in the

application for which said product is intended.

Dispose of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate systems)

This symbol on the product or on its packaging indicates that this

product shall not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

1-7 Warranty Information

Certifications

CE / FCC, Class 1 Laser Eye Safety

Certification of Eye Safety

This laser product is inside implemented by using 825, 850, 930, 990nm LD

Transceivers, manufactured by Opticis Co., Ltd., which are all certified by

CDRH/FDA referred as classified in Laser Class 1 (IEC60825-1).

Caution –Use of controls or adjustments or performances of procedures

other than those specified herein may result in hazardous radiation exposure.

1-8 Certifications

Version 0.9 January 2021

Opticis Locations

OPTICIS HQ

Opticis Co., Ltd.

3F, 305, Sanseong-daero

Sujeong-gu, Seongnam-si

Gyeonggi-do, 13354

South Korea

Tel: +82 (31) 719-8033

Fax: +82 (31) 719-8032

www.opticis.com

For order support, please contact your Distributor or Reseller.

For technical support, check with the Opticis web site www.opticis.com or

contact techsupp@opticis.com

Inhaltsverzeichnis

Andere opticis Extender Handbücher

opticis

opticis Stretch DVI DDFX-100-TR Bedienungsanleitung

opticis

opticis IPKVM-500-ED Bedienungsanleitung

opticis

opticis M5-1001 Bedienungsanleitung

opticis

opticis HDFX-250-TR Bedienungsanleitung

opticis

opticis DPFX-200-TR Bedienungsanleitung

opticis

opticis M5-2C2 Bedienungsanleitung

opticis

opticis DPFX-1F14-TR Bedienungsanleitung

opticis

opticis Stretch DVI M1-201SA-TR Bedienungsanleitung

opticis

opticis DPFX-100-TR Bedienungsanleitung

opticis

opticis DPFX-300-TR Bedienungsanleitung

opticis

opticis HDWX-100-TR Bedienungsanleitung

opticis

opticis HDFX-500-TR Bedienungsanleitung

opticis

opticis HDFX-700-TR Bedienungsanleitung

opticis

opticis M5-2A2-TR Bedienungsanleitung

opticis

opticis OP-HDWX-100-TR Bedienungsanleitung

opticis

opticis HDFX-150-TR Bedienungsanleitung

opticis

opticis M5-1003 Bedienungsanleitung

opticis

opticis IPKVM-310-ED Bedienungsanleitung

opticis

opticis HDFX-200-TR Bedienungsanleitung

opticis

opticis IPKVM-350ED Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis M1-203D-TR Bedienungsanleitung

opticis

opticis FIBER-DVI-110TR Bedienungsanleitung

opticis

opticis DPFX-250-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

opticis DPFX-700-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken