Opticis KVMX-200-TR Bedienungsanleitung

One (1) fiber DVI KVM Extender,

KVMX-200-TR

User’s Manual

Doc No. : OKM-D140704-KVMX-200 / Rev1.0

Revision 1.0 4, July, 2014

Opticis Locations

Headquarters

Opticis Co., Ltd.

# 16Fl, Kins Tower

8 Sungnam-daero, 331 beon-gil,

Bundang-gu,

Seongnam-si, Gyunggi-do, 463-844

South Korea

Te l: +82 (31) 719-8033

Fax: +82 (31) 719-8032

www.opticis.com

For order support, please contact your Distributor or Reseller.

For technical support, check with the Opticis web site www.opticis.com or

contact [email protected]om.

Welcome!

Congratulations on your purchase of the KVMX-200-TR, One (1) fiber DVI

Optical KVM Extender. This manual contains information that will assist you in

installing and operating the product.

Product Description

New One (1) fiber DVI optical KVM extender, KVMX-200-TR transmits DVI,

USB HID, PS/2, RS-232 and bi-directional stereo audio signal up to 1.0km

(3,280feet) over one (1) LC optical fiber. As an option, you can select one (1) or

two (2) fibers connection by SFP module.

Designed for high resolution performance, it guarantees lossless image quality

and no frame dropping to deliver perfect graphic data transmission up to

WUXGA (1920x1200) at 60Hz.

It provides Auto-mix EDID programming feature that reads EDID information of

both local side and remote side displays and then, detects the lowest resolution

of them. It makes the installation of KVMX-200-TR more easy and flexile at any

variable resolutions.

Figure 1–Connection Diagram

Shipping Group of KVMX-200-TR

One (1) Transmitter (Tx) and One (1) Receiver (Rx)

Two (2) +12V/3A units (including AC cord).

User’s Manual

Option: Remote console switch (LSKP-10030 & Indicator (RSKP-

1003),1RU mounting rack (OPMCR-1U),bracket (OPMCB), fiber-optic

cable

1-1 Welcome, Product Description, Shipping Group

Manual Contents

__________________________________________

Manual Contents 1-0

Welcome, Product Description 1-1

System Requirements for Setup 1-2

Installation 1-3

Switch Operation Guide 1-5

Troubleshooting, Maintenance, Technical Support 1-6

Product Specifications 1-7

Features, Ordering Information 1-9

Firmware download 1-10

Warranty Information 1-13

Regulatory Statements 1-14

Pictorials

Figure 1 –Connection Diagram 1-1

Figure 2 –Connection of Transmitter 1-3

Figure 3 –Connection of Receiver 1-4

1-0 Manual Contents

System Requirements for Setup

Hardware requirements

You have a graphic controller card with a DVI port in your

Windows/Mac (Mac is option), or SUN system. It should support

the maximum graphic resolution feature of the display to be

connected.

In case of using a computer, no special memory size, CPU

speed and chipsets are required.

Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to install with

the optical link.

Software requirements

No special needs, if the DVI graphic controller and display

peripheral are operational with the platform’s OS and

application.

1-2 System Requirements for Setup

Installation

Important: Please keep the installation procedure below. Improper or no

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents of the shipping group.

Step 2

Power on the PC and display(s).

Step 3

Plug the 12V power adapters to the +12V DC jack on the rear side of

Transmitter and Receiver. Then, the Power LED (blue) will be turned on.

Step 4

Connect the DVI IN port of Transmitter to the DVI output of a PC over a DVI

copper cable. Connect USB IN port of Transmitter to PC over one (1) USB A-

B cable for Keyboard and Mouse. Then, the LED (blue), next to the USB IN

port will be turned on.

If necessary, connect the RS-232, DIO, audio, and mic cables to RS-232, DIO

1IN/GND/2OUT, audio IN/OUT, and mic IN/OUT connectors on the front side

of Transmitter.

Step 5

Connect the Local Display port of Transmitter to a DVI display over a DVI

copper cable. Attach keyboard and mouse to the USB HID port or PS/2 port

for local control. Then, the LED (blue) will be turned on. You may skip Step 5

if you don’t need local control.

Figure 2–Connection of Transmitter

1-3 Installation

Step 6

Connect the DVI OUT port of Receiver to a DVI display over a DVI copper cable.

Attach keyboard and mouse to the USB HID port or PS/2 port for remote control.

Then, the LED (blue) will be turned on.

If necessary, connect the RS-232, DIO, audio, and mic cables to RS-232, DIO

1IN/GND/2OUT, audio IN/OUT, and mic IN/OUT connectors on the front side of

Receiver.

Figure 3–Connection of Receiver

Step 7

Connect one (1) LC single-mode fiber to an Optic port, on the rear side of the

Transmitter and Receiver. Then, the Optic LED (blue) and Status LED (blue) on the

front side of both will be turned on.

Note1: If you select two (2) fibers application, each fiber channel shall be connected

as 1 to 1 and 2 to 2 carefully.

Step 8

If the connectors are fully engaged, a display will be shown.

Note2: KVMX-200-TR reads EDID information of both local side and remote side

displays and then, determines the lowest resolution of them for easy and flexible

installation (Auto-mix EDID programming).

1-4 Installation

Switch operation guide

Graphic data is always transmitted to not only Local Display but also remote

DVI OUT. However, USB port for keyboard and mouse is selectable for

control at specific position.

Local control

- Set the switch on the front of the Transmitter to the Local side, and the

Local LED (blue) of both will be turned on.

- Then, you can control a PC at local side through the display, connected to

the Local Display port of the Transmitter.

Remote control

- Set the switch on the front of the Transmitter from the Local side to the

Remote side, and the Remote status LED (blue) on the front side of both

Transmitter and Receiver will be turned on.

- Then, you can control a PC at remote side through the display, connected to

the DVI OUT port of the Receiver.

Console Switch and Indicator

- Connect the Console port in both Transmitter and Receiver to the RJ11 port

in both Console switch (LSKP-1003) and Indicator (RSKP-1003) over each

one (1) console cable.

- Set the switch on the front of the Transmitter to the Console side.

- Then, you can control by setting the switch (Local or Remote) on the LSKP-

1003. If you set the switch to the Local, the Local status LED (Green) of

LSKP-1003 and (Red) of RSKP-1003 will be turned on, and you can control

a PC at Local side.

On the contrary, if you set the switch from the Local to the Remote, the

Remote status LED (Red) of LSKP-1003 and (Green) of RSKP-1003 will be

turned on, and you can control a PC at Remote side.

1-5 Switch operation guide

Troubleshooting

The display shows only black screen.

- Ensure that all plugs and jacks used by external power supplies (both

Opticis and others) are firmly connected. Ensure that the related LED ON.

- Ensure that the transmitter and receiver plugged correctly to a PC and

display, respectively.

- Check if the PC and display(s) are powered on and properly booted.

Screen is distorted or displays noises.

- Check if the graphic resolution is properly set. Go to the display properties of

Windows and tap the settings.

- Ensure that the resolution sets less than WUXGA (1920x1200) at 60Hz

refresh ratio.

- Reset the system. Disconnect and reconnect the optical fiber or 12V power

adapters.

Maintenance

No special maintenance is required for this and power adapters. Ensure this

product power adapters are stored or used in a benign environment free from

liquid or dirt contamination.

There are no user serviceable parts. Refer all service and repair issues to

Opticis.

Technical Support and Service

For commercial or general product support, contact your reseller. For

technical service, contact Opticis by email techsu[email protected] or visit its

website at www.opticis.com

1-6 Troubleshooting, Maintenance, Technical Support

Product Specifications

OPTICAL INTERCONNECTION

Number of fibers

Connectors

Wavelength

Operating Distance

One (1) or Two (2) fiber

One (1) or Two (2) LC connector

1310/1550 nm

Up to 1.0 km (3,280feet) over LC single-mode

Up to 300m (985feet) over LC multi-mode

VIDEO

Supported Resolution

Pixel data bit depth

Connectors (Tx)

Connector (Rx)

WUXGA (1920x1200)

8 bits per channel, 3 channels (RGB)

One (1) DVI-D receptacle for input

One (1) DVI-D receptacle for local monitor

One (1) DVI-D receptacle for remote monitor

USB, PS/2

Supported Standard

Connectors (Tx)

Connector (Rx)

USB HID, PS/2

One (1) USB-B receptacle for connection with PC.

Two (2) USB-A receptacle for local KM

Two (2) PS/2 receptacle for local KM

Two (2) USB-A receptacle for remote KM

Two (2) PS/2 receptacle for remote KM

AUDIO (3.5mm jack)

Connector (Tx)

Connector (Rx)

One (1) Audio In & One (1) Audio Out

One (1) Mic In & One (1) Mic Out

One (1) Audio In & One (1) Audio Out

One (1) Mic In & One (1) Mic Out

DIO

Connector (Tx)

Connector (Rx)

One (1) DIO In& One (1) GND &

One (1) DIO Out

One (1) DIO In& One (1) GND &

One (1) DIO Out

SERIAL DATA COMMUNICATION

Connector (Tx)

Connector (Rx)

Supported Protocol

One (1) 9-pin Dsub receptacle plug

RS-232C

1-7 Product Specifications

Product Specifications

Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: - 30°C to 70°C

Humidity: 10% to 95%

Dimensions (WDH): 216 x 112 x 44mm

AC/DC Power Adapter

Power Input: AC 100-240V, 50/60Hz, AC power cord with power jack.

Power Output: +12 V, 3A SMPS DC-power Adapter

Cord DC Jack: Core is 12 V and outer is GND.

1-8 Product Specifications

Features

One (1) or Two (2) fiber connection by SFP module

Supports up to WUXGA (1920x1200) resolution at 60Hz.

Transmits DVI, USB HID, PS/2, RS232 and audio signal up to 1km

(3,280feet) over one (1) or two (2) LC optical fibers.

Operates with both single and multi-mode optical fibers.

Up to 1.0km (3,280feet) with one (1) or two (2) LC single-mode

fibers

Up to 300m (985feet) with two (2) LC multi-mode fibers

Offers DVI, USB, PS/2 Loop through port for a local display and

Keyboard / Mouse.

Supports bi-directional stereo audio.

Auto-mix EDID programming

Supports DIO port.

Lossless Image Quality, with no Frame Dropping

USB HID and PS/2 ports for keyboard and mouse

Provides Serial Control Data: RS232C through 9pin D-sub connector.

Remote console switch, Indicator, 19” 1RU mounting rack and bracket

as an option

Certifies FCC and CE standards.

Ordering Information

KVMX-200-TR: One (1) single-mode fiber connection by SFP module

KVMX-201-TR: Two (2) single-mode fibers connection by SFP module

KVMX-202-TR: Two (2) multi-mode fibers connection by SFP module

Note: Opticis recommend user to use the SFP module, supplied by Optics for

stable connection. If user uses other SFP modules, it might cause malfunction

or failure to properly use the product.

1-9 Features, Ordering Information

Firmware download

Step 1

Please download the setup and firmware file.

Note: Opticis will provide the setup and firmware file, if the KVMX-200-TR

program needs to be updated.

Step 2

Click “Setup”file in DN_GUI folder and select a language. Then, start setup

wizard is shown as below. Click the “Next”button.

Step 3

Choose install location and Click the “Next”button.

1-10 Firmware download

Step 4

Select shortcuts. (If you don’t want it, check the blank box) Then, click the

“Next”button.

Step 5

Click “Install”button and then, the installation will be completed.

Step 6

Check the box “Launch Download GUI”and click the “Finish”button.

Step 7

Then, the Download GUI is completed to install the firmware download.

Step 8

Power on the Transmitter or Receiver and connect a PC to Service port on

the front side of Transmitter or Receiver over Mini-USB cable.

Step 9

Operate Download GUI and select Comport to select communication port of

PC. Then, click “Download”button.

1-11 Firmware download

Step 10

Click “Open”button and select download file (bin. Format)

Step 11

Click “Start”button. Then the firmware will be downloaded

Step 12

The firmware download is completed and its status will be shown as below.

Step 13

Please close the program and reboot KVMX-200-TR to run it under new

firmware program.

1-12 Firmware download

Warranty Information up

1 (One) Year Warranty

Opticis warrants this KVMX-200-TR to be free from defects in workmanship

and materials, under normal use and service, for a period of one (1) year from

the date of purchase from Opticis or its authorized resellers.

If a product does not work as warranted during the applicable warranty period,

Opticis shall, at its option and expense, repair the defective product or part,

deliver to customer an equivalent product or part to replace the defective item,

or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of Opticis.

Replacement products may be new or reconditioned.

Any replaced or repaired product or part has a ninety (90) day warranty or the

reminder of the initial warranty period, whichever is longer.

Opticis shall not be responsible for any software, firmware, information, or

memory data of customer contained in, stored on, or integrated with any

products returned to Opticis for repair under warranty or not.

Warranty Limitation and Exclusion

Opticis shall have no further obligation under the foregoing limited warranty if

the product has been damaged due to abuse, misuse, neglect, accident,

unusual physical or electrical stress, unauthorized modifications, tampering,

alterations, or service other than by Opticis or its authorized agents, causes

other than from ordinary use or failure to properly use the product in the

application for which said product is intended.

Dispose of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate systems)

This symbol on the product or on its packaging indicates that this

product shall not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

1-13 Warranty Information

Regulatory Statements

This device complies with part 15 of FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation. This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to part 15 and 2 of

FCC Rules, EN 55022/55024/61000-3 for CE certification. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and. if not installed

and used in accordance with the instruction guide, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult a service representative for help.

Properly shielded and grounded cables and connectors must be used in order

to comply with FCC/CE emission limits. Changes or modifications not expressly

approved by the party responsible for compliance could void the user s authority

to operate the equipment.

1-14 Regulatory Statements

Inhaltsverzeichnis

Andere opticis Extender Handbücher

opticis

opticis Stretch DVI DDFX-100-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis Stretch DisplayPort DPC-MP14-TR Bedienungsanleitung

opticis

opticis M5-2C2-TR Bedienungsanleitung

opticis

opticis HDFX-150-TR Bedienungsanleitung

opticis

opticis DVI/USB/RS-232 and Audio Optical Extender Bedienungsanleitung

opticis

opticis DPFX-100-TR Bedienungsanleitung

opticis

opticis HDFX-250-TR Bedienungsanleitung

opticis

opticis DPFX-700-TR Bedienungsanleitung

opticis

opticis M1-203D-TR Bedienungsanleitung

opticis

opticis AVFX-100TR Bedienungsanleitung

opticis

opticis Stretch DVI M1-201SA-TR Bedienungsanleitung

opticis

opticis M5-2C2 Bedienungsanleitung

opticis

opticis HDFX-200-TR Bedienungsanleitung

opticis

opticis OP-HDWX-100-TR Bedienungsanleitung

opticis

opticis DPFX-200-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis AVFX-100-TR Bedienungsanleitung

opticis

opticis HDFX-700-TR Bedienungsanleitung

opticis

opticis DPFX-300-TR Bedienungsanleitung

opticis

opticis M5-1003 Bedienungsanleitung

opticis

opticis DPFX-250-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis IPKVM-310-ED Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

opticis KVMX-200-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken