Opticis DPFX-100-TR Bedienungsanleitung

ㅕ

Manual Contents

__________________________________________

Manual Contents 1-0

Welcome! Product Description 1-1

System Requirements for Setup 1-2

Installation 1-3

Troubleshooting 1-5

Maintenance, Technical Support, and Service 1-6

Product Specifications 1-7

Warranty Information 1-8

Regulatory Statements 1-9

Pictorials

Figure 1 –Overall Connection of DPFX-100-TR 1-1

Figure 2 –Position of the LED 1-3

Figure 3 –Fiber numbering & Caution on both fiber ports 1-3

Figure 4 –Connection of optical fiber 1-4

1-0 Manual Contents

User’s Manual for the

DPFX-100-TR

Two (2) fibers Detachable

DisplayPort Extender

Welcome!

Congratulations on your purchase of the two (2) fibers DisplayPort extender,

DPFX-100-TR. This manual contains information that will assist you in

installing and operating the product.

Product Description

New compact optical DisplayPort extender, DPFX-100-TR enables to transmit

WQXGA (2560x1600) at 60Hz signal up to 300m (985feet), avoiding any tricks

like scaling or data compression for lessening a burden of data transmission.

It provides total data throughput 10.8Gbps (2.7Gbps per lane).

The pure fiber connection by two (2) LC fibers connector between transmitter

and receiver, gives clean, secure and easy installation with perfect electrical

isolation, but without electrical hazard and interference. The DPFX-100-TR can

be operated by both USB power by plugging the USB cable and DC power

included as a shipping group.

Figure 1 –Overall Connection of DPFX-100-TR

The Shipping Group of DPFX-100-TR;

One (1) Transmitter (Tx) and One (1) Receiver (Rx)

Two (2) DP copper cables (0.5m)

Two (2) USB to DP plug Cables

Two (2) DC +5V,1A power adapters

User’s Manual

Option Product: LC Multi-mode fiber

1-1 Welcome, Product Description

System Requirements for Setup

□Hardware requirements

▪You have to have a DisplayPort source and display. It should

support the maximum graphic resolution feature of displays to

be connected.

▪No special requirements of memory size, CPU speed and

chipsets, if you’ve already properly installed your DisplayPort

systems or graphic cards.

▪Proper initial trial of the entire platform with its application using

a short length copper cable is recommended prior to install with

the optical link.

□Software requirements

▪No special restrictions, if you’ve already properly installed your

Displayport systems.

□Power Technical Advisory

▪Enclosed Power Adaptors and USB cables supply power to both

Transmitter and Receiver.

□Connection Advisory

▪It is highly recommend that DisplayPort source is directly

connected into DisplayPort display output via DPFX-100-TR

without connection to incompatible distributor, switcher and

selector.

1-2 System Requirements for Setup

Installation

Important: Please keep the installation procedure below. Improper or no

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents in the shipping group.

Step 2

Power on the DisplayPort source and display. Power on both transmitter and

receiver by using USB power cable or DC power adapter.

Step 3

Then, the LED (Green color) will begin to blink once a second for three (3)

times regularly on both sides.

Figure 2 –Position of the LED

Step 4

Connect two (2) LC optical fibers between the transmitter and the receiver

and each fiber channel shall be connected as A to A and B to B carefully.

Ensure the duplex connectors are fully engaged and then, the top LED will

begin to blink regularly.

Fig Figure 3 –Fiber numbering & Caution on both fiber ports

1-3 Installation

Position of the LED

Note1: The maximum extension length by multi-mode fiber is 300 meters.

Note2: Be recommended NOT to use any intermediate cable or adapter

between them to avoid undesirable performance degradation.

Fig Figure 4 –Connection of optical fiber

Step 5

Connect the transmitter to the Displayport source over DisplayPort copper

cable.

Step 6

Connect the receiver to the Displayport source over Displayport copper cable.

Note: If the connectors are fully engaged, the bottom LED will turn on.

Step 7

If the system does not work properly, go to the page 1-5 trouble shooting.

1-4 Installation

Troubleshooting

The display shows only black screen.

- Ensure that all plugs and jacks used by USB power cables or external power

supplies are firmly connected. Ensure that the LED ON.

- Ensure that the DisplayPorts are firmly plugged in to the DisplayPort source and

display.

- Ensure that the transmitter and receiver modules plugged correctly to the source

and display, respectively.

- Check if the DisplayPort source and display are powered on and properly booted.

- Reset the system by de-plugging and re-plugging the transmitter DisplayPort or

receiver DisplayPort, or by de-plugging and re-plugging the USB power cables

that are plugged of transmitter and receiver module

- Re-boot up the system while connecting the module.

Screen is distorted or displays noises.

- Check if the graphic resolution is properly set. Go to the display properties and tap

the settings. Ensure that the resolution sets less than WQXGA (2560x1600) at

60Hz refresh ratio.

- Reset the system

- Power down, disconnect and reconnect the optical system cable or DC power

adaptors, and power up

1-5 Troubleshooting

Maintenance

No special maintenance is required for the optical system cables and power

supplies. Ensure that the cables and power modules are stored or used in a

benign environment free from liquid or dirt contamination.

There are no user serviceable parts. Refer all service and repair issues to Opticis

or its authorized distributor.

Technical Support and Service

For commercial or general product support, contact your reseller. For technical

service, contact Opticis by email techsupp@opticis.com or visit its website at

www.opticis.com.

1-6 Maintenance, Technical Support, and Service

Product Specifications

Compliance with DisplayPort standard: supports DP 1.1a

Extension limit: 300m (985feet) for WQXGA (2560x1600) at 60 Hz

refresh rate over two (2) LC multi-mode fibers (50/125um).

Graphic Transmission Bandwidth: Supports total data rate

10.8Gbps (2.7Gbps per lane).

Supports Dual-mode DP (DP++)

Supports auxiliary /l²C channel over fiber

Mechanical specifications of transmitter and receiver

Dimensions(WDH):35mm x 72mm x 16mm

Environmental Specifications

Operating temperature: 0°C to 50°C

Storage temperature: -30°C to 70°C

Humidity: 10% to 80%

AC/DC Power Adapter

Power Input: AC 100-240V, 50/60Hz.

Power Output: +5 V, 1A SMPS DC-power Adapter

Cord DC Jack: Core is + 5 V and outer is GND.

Certification:FCC, CE

1-7 Product Specifications

Warranty Information

1 (One) Year Warranty

Opticis warrants this optical DP module to be free from defects in workmanshi

p and materials, under normal use and service, for a period of one (1) year fro

m the date of purchase from Opticis or its authorized resellers.

If a product does not work as warranted during the applicable warranty period,

Opticis shall, at its option and expense, repair the defective product or part, d

eliver to customer an equivalent product or part to replace the defective item,

or refund to customer the purchase price paid for the defective product.

All products that are replaced will become the property of Opticis.

Replacement products may be new or reconditioned.

Any replaced or repaired product or part has a ninety (90) day warranty or the

reminder of the initial warranty period, whichever is longer.

Opticis shall not be responsible for any software, firmware, information, or me

mory data of customer contained in, stored on, or integrated with any product

s returned to Opticis for repair under warranty or not.

Warranty Limitation and Exclusion

Opticis shall have no further obligation under the foregoing limited warranty if

the product has been damaged due to abuse, misuse, neglect, accident,

unusual physical or electrical stress, unauthorized modifications, tampering,

alterations, or service other than by Opticis or its authorized agents, causes

other than from ordinary use or failure to properly use the product in the

application for which said product is intended.

Dispose of Old Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate systems)

This symbol on the product or on its packaging indicates that this

product shall not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The recycling of materials will help to conserve natural resources. For more detailed

information about recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

1-8 Warranty Information

FCC/CE Statement for regulation of Electro-magnetic

emission

This device complies with part 15 of FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation. This equipment has been

tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 and 2 of FCC Rules, EN 55022/55024/61000-3 for CE

certification. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and. if not installed and used in accordance with the instruction guide,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult a service representative for help.

Properly shielded and grounded cables and connectors must be used in order

to comply with FCC/CE emission limits. Changes or modifications not

expressly approved by the party responsible for compliance could void the

user s authority to operate the equipment.

1-9 Regulatory Statements

Revision 1.0. Feb. 2013

Opticis Locations

OPTICIS HQ

Opticis Co., Ltd.

# 16Fl, Kins Tower Jeongja 331,

8 Sungnam-daero, Bundang-gu

Sungnam-si, Gyunggi-do, 463-782

South Korea

Te l: +82 (31) 719-8033

Fax: +82 (31) 719-8032

www.opticis.com

For order support, please contact your Distributor or Reseller.

For technical support, check with the Opticis web site www.opticis.com or

contact [email protected]om

Inhaltsverzeichnis

Andere opticis Extender Handbücher

opticis

opticis Stretch DVI M1-201SA-TR Bedienungsanleitung

opticis

opticis IPKVM-350ED Bedienungsanleitung

opticis

opticis M5-1002 Bedienungsanleitung

opticis

opticis DVI/USB/RS-232 and Audio Optical Extender Bedienungsanleitung

opticis

opticis IPKVM-500-ED Bedienungsanleitung

opticis

opticis M5-2C2-TR Bedienungsanleitung

opticis

opticis M5-1001 Bedienungsanleitung

opticis

opticis AVFX-100-TR Bedienungsanleitung

opticis

opticis FIBER-DVI-110TR Bedienungsanleitung

opticis

opticis M5-2A2-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis HDCX-100-TR Bedienungsanleitung

opticis

opticis DVI/USB/RS-232 and Audio Optical Extender Bedienungsanleitung

opticis

opticis HDWX-100-TR Bedienungsanleitung

opticis

opticis KVMX-200-TR Bedienungsanleitung

opticis

opticis HDFX-700-TR Bedienungsanleitung

opticis

opticis DPFX-700-TR Bedienungsanleitung

opticis

opticis HDFX-100-TR Bedienungsanleitung

opticis

opticis DPFX-250-TR Bedienungsanleitung

opticis

opticis M1-203D-TR Bedienungsanleitung

opticis

opticis Stretch DisplayPort DPC-MP14-TR Bedienungsanleitung

opticis

opticis IPKVM-310-ED Bedienungsanleitung

opticis

opticis DPFX-300-TR Bedienungsanleitung

opticis

opticis Stretch DVI DDFX-100-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

opticis DPFX-100-TR Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken