Opticon IRU 4100 Bedienungsanleitung

PHL4100/IRU4100 OPTICON - 1

PHL 4100

IRU 4100

USER'S MANUAL

Opticon Article Code O0220000140

2 - OPTICON PHL4100/IRU4100

LIMITED WARRANTY AND

DISCLAIMERS

BY OPENING THE PACKAGE OF THIS PRODUCT YOU

AGREE TO BECOME BOUND BY THE LIABILITY AND

WARRANTY CONDITIONS AS DESCRIBED BELOW.

UNDER ALL CIRCUMSTANCES THIS MANUAL

SHOULD BE READ ATTENTIVELY, BEFORE

INSTALLING AND OR USING THE PRODUCT.

Serial number

A serial number appears on all Opticon products. This

official registration number is strictly related to the device

purchased. Make sure that the serial number appearing on

your Opticon device has not been removed. Removing the

serial number might affect the warranty conditions and

liability disadvantageously, so please be strict at

maintaining the label with serial number on the Opticon

product.

Warranty / Warranty period / Liability

Unless otherwise agreed in a contract, all Opticon

products are warranted for the period of one year after

purchase, covering defects in material and workmanship.

Opticon will repair or, at its opinion, replace products that

prove to be defective in material or workmanship under

proper use during the warranty period. Opticon will not be

liable in cases where modifications are made by the

customer. In such case the standard repair charge will be

applicable. The standard charge for repair will also be

applicable in cases where no defect is found at all. These

rules also apply for products that are still under warranty.

Under no circumstance will Opticon Sensors Europe, be

liable for any direct, indirect, consequential or incidental

damages arising out of use or inability to use both the

hardware and software, even if Opticon has been informed

about the possibility of such damages.

Packaging

We recommend that you save all packing material, as it

should be used whenever you need to transport your

scanner (eg. for service). Damage caused by improper

repacking is not covered by the warranty.

Trademark

Trademarks used are property of their respective owners.

CAUTION: This information is subject to change

without prior notice.

This manual may not, in whole or in part, be

copied, photocopied, reproduced, translated or

converted to any electronic or machine readable

form without prior written consent of Opticon

Sensors Europe.

THE GENERAL USE AND FUNCTIONING OF

THE TERMINAL TOGETHER WITH THE CRADLE

IS DESCRIBED IN THIS MANUAL. THE EXACT

BEHAVIOUR OF THE TERMINAL DEPENDS ON

THE USER APPLICATION THAT IS RUNNING.

FOR INSTRUCTIONS ABOUT APPLICATIONS

CONSULT THE DOCUMENTATION OF THAT

SOFTWARE.

PHL4100/IRU4100 OPTICON - 3

CONTENTS

1 INTRODUCTION .................................4

1.1 Unpacking............................................5

1.2 Detailed view .......................................6

1.2.1 Terminal details....................................6

1.2.2 Cradle details.......................................8

1.3 Handling instructions ...........................9

2 GET STARTED..................................10

2.1 Fix Hand strap ................................... 11

2.2 Battery instructions ............................12

2.2.1 Required batteries .............................12

2.2.2 Battery monitor ..................................12

2.2.3 instructions for charging.....................13

2.2.4 When to replace or recharge

main battery .......................................14

2.2.5 How to (re)place main battery

in terminal ..........................................14

2.2.6 When to replace backup battery? ......15

2.2.7 How to (re) place backup battery?.....15

2.3 Working with stylus ............................16

2.4 Using a PCMCIA card........................17

2.4.1 Insert PCMCIA Card ..........................17

2.4.2 Release PCMCIA Card......................17

2.5 Installation instructions ......................18

3 STORING THE TERMINAL ...............19

4 READING BAR CODES ................... 20

5 PIN-OUT ........................................... 21

6 TROUBLE SHOOTING ..................... 22

6.1 Communication malfunctioning......... 23

6.2 Read operation malfunctioning ......... 23

6.3 Terminal malfunctioning .................... 23

7 SPECIFICATIONS ............................ 25

7.1 Terminal specifications...................... 25

7.2 Cradle specifications......................... 27

8 PRODUCT ORDERING

INFORMATION................................. 28

4 - OPTICON PHL4100/IRU4100

1 INTRODUCTION

The PHL 4100 is a handheld touch screen terminal

based on Linux™ operating system. It is lightweight

and suitable for comprehensive real-time

automation solutions in mobile applications.

The design allows operation by single finger or

stylus. The touch screen enables intuitive and

direct navigation and activation. Data input can

quickly be entered on the alphanumeric keyboard

with one character per key layout.

The PHL 4100 model has an integrated laser

scanner for barcode scanning.

For communication the terminal is provided with an

IrDA and a PCMCIA interface. By inserting the

appropriate PC card in the PCMCIA slot the

terminal can exchange data through Wireless LAN,

GSM/GPRS, Fast Ethernet, or Compact Flash.

With the IrDA interface the terminal can

communicate to the IRU 4100 IrDA communication

station.

The terminal is powered by a rechargeable Li-Ion

battery. Opticon can supply a separate battery

charger or a charging and IrDA communication

station to charge the battery.

The functionality of the terminal is determined by

the user application. As a tool to develop an

application Opticon can supply a development kit.

PHL4100/IRU4100 OPTICON - 5

B C D

E F

1.1 UNPACKING

When you remove the packing, please check for

any physical damage. We recommend that you

save all packing material, as it should be used

whenever you need to ship your terminal (eg. for

service). Damage due to improper repacking is not

covered by the warranty.

Apart from the terminal, charger or cradle,

additional items might be ordered and supplied. If

there are any missing parts please contact your

supplier.

PHL 4100 contents

• Terminal (A)

• Hand strap (B)

• Rechargeable battery LBP 4100 (C)

• Backup battery (D)

PHL 4100 accessories

• Rechargeable battery LBP 4300 (E)

• Battery cover for LBP 4300 (F)

Charger contents

• Charger (i)

Charger accessories

Accessories supplied as separate item.

• Power supply (ii)

IRU 4100 contents

• Cradle (a)

IRU 4100 accessories

Accessories supplied as separate item.

• RS232 cable (b)

• Power supply (c)

Do not remove the product label!

On the back of every unit you will find a product

label. This is attached by the manufacturer and

includes information about the function it supports

and a serial number. Do not remove it.

6 - OPTICON PHL4100/IRU4100

1.2 DETAILED VIEW

1.2.1 TERMINAL DETAILS

1. Cap

To cover PCMCIA slot

2. Cap screws

Positioned on both sides for release and fixation of

cap

3. LED Indicator

Can be used to indicate results, for example bar

code reading / status of communication

4. Touch screen / LCD Display

Operate by stylus to tap through menus. Take

notice of the following:

Contrast of LCD Display

To increase contrast of display press + FN

To decrease contrast of display press + FN

Backlight of LCD Display

When the backlight is activated, power

consumption increases. To extend the life time of

your batteries use the backlight as less as possible.

At the top a status bar is displayed. The 4 items

(from left to right) have the following functions:

PHL4100/IRU4100 OPTICON - 7

• Active Window indicator

Displays the title of the active program. Consult

your application programmer for more information.

• Battery monitor

Indicates current status of the main battery.

Holds also the status for the backup battery. Read

battery instructions further in this manual.

• Keypad modus indicator

Indicates current modus as selected by (M)key

ALPHA UPPER CASE

alpha lower case

numeric and punctuation

•Clock

Activate clock menu by stylus

5. Power (PW) key

For switching power On/Off

6. Buzzer

Auditive indicator

7. Modus (M) key

To select input mode as shown at the Keypad

modus indicator in the status bar of the LCD

display.

8. Scan key

Typical use for scanning: trigger key, switches laser

beam on for barcode reading

Typical use in application: escape key, to cancel

current operation

9. Matrix keypad

Typically basic functions for data input, as below:

CLR : Cancel input / Back space

FN : define by user application

: scroll up / backwards

: scroll down / forward

EN : (Enter) to confirm input

Each character key has 3 appearances in

combination with the Modus (M) key:

ALPHA UPPER CASE

alpha lower case

numeric and punctuation

10. Reset

To be pressed by a thin device to reset the

application

11. Backup battery case adapter

For housing backup battery

12. Reading window

For the emission of laser beam for bar code

reading

13. Product label

Contains product information and serial number.

Do not remove it!

14. PCMCIA release switch

For releasing PCMCIA card manually

15. Latch screw

For locking and unlocking the main battery cover

16. Main battery cover

The standard cover is developed for battery type

LBP 4100. For housing type LBP 4300 (larger

capacity) a separate cover is available.

17. Main battery compartment

For housing main battery

18. Hand strap pillar

To attach hand strap

19. Stylus

For tapping on touch screen and keys

20. Charging contacts

For power supply from the cradle to terminal.

21. Optical interface window

For infra red communication

8 - OPTICON PHL4100/IRU4100

1.2.2 CRADLE DETAILS

1. DC input socket

Input for AC power supply / adaptor

2. RS-232C socket

Connecting to host, through Opticon RS232 cable

3. Electrical contacts

If the PHL4100 terminal is inserted the battery will

automatically be charged.

4. Optical window

Optical communication interface for data

transmission

5. LED indicator

Typical LED indication:

green: powered, terminal is recognised

off: no power, or terminal not recognised

ADEB

0 C

+ 40 C

PHL4100/IRU4100 OPTICON - 9

1.3 HANDLING INSTRUCTIONS

To avoid malfunctioning and to ensure years of

trouble free operation, pay attention to the

following:

A. Temperature conditions

Use in area's between 0 and 40°C.

Do not expose the terninal for a long time to

extreme conditions - like direct sunlight, near a

heater, or in a car - or in areas that are very cold,

humid, moisturized or dusty.

Do not expose the terminal to rain or water splash.

Avoid temperature changes. Sudden temperature

changes can cause condensation to form on the

terminal. Using the terminal while condensation is

present can cause malfunction. Always wait until

the condensation clears naturally before attempting

operation.

B. Shock

Do not subject the terminal to very strong impact,

do not throw or drop the terminal from large

heights.

Do not allow a mechanical shock to the terminal.

Do not leave the terminal in an area where static

charge is accumulated, or near devices where

electromagnetic emission is generated.

Do not place any objects on top of the terminal. Do

not lay the terminal face down. Doing so can cause

accidental operation of the key(s).

C. Use of the products

Use the terminal always with the cap mounted in

order to protect the PCMCIA slot.

Do not place any product other than the PHL 4100

type terminal in the IRU 4100 cradle.

D. Cleaning instructions

Clean the reading window of the terminal and the

cradle periodically with a soft dry cloth.

Clean the electrical contacts of the terminal and the

cradle regularly with a cotton bud (or soft dry cloth).

Avoid touching the contacts by hand. The contacts

must stay as clean as possible to maintain optimal

charging capacity.

Clean the exterior by wiping it with a soft, dry cloth.

Do not use thinner, white spirit or other solvents.

These can discolour the case and the keys and has

a negative effect on the lifetime of the keys.

Do not use water when cleaning. This can cause

malfunction.

E. Maintenance

There are no user-serviceable parts inside the

terminal or the cradle. So do not try to take it apart.

The manufacturer will not be liable for any damage

caused by the customer. In case of serious

malfunction, please consult Opticon or your local

dealer.

10 - OPTICON PHL4100/IRU4100

2 GET STARTED

Fix hand strap to the terminal.

Use the hand strap properly to avoid drop.

Read instructions in this manual.

Insert backup battery.

Read instructions in this manual.

Insert main battery.

To be sure of proper operation, it is advised to start

with a full battery, therefore charge it first.

Read instructions in this manual.

If required: Insert PCMCIA card.

For PCMCIA data exchange, the appropriate card

needs to be inserted.

Read instructions in this manual.

Place the cradle in normal office conditions.

Avoid a place under strong light. Otherwise infra

red communication may be disturbed.

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung