Osram ARCHISHAPE 2.5 Washer Bedienungsanleitung

ARCHISHAPE® 2.5 Washer

ARCHISHAPE® 2.0 Linear

DMX and RDM Conﬁguration Guide

Cover:

ARCHISHAPE®2.5 Washer

ARCHISHAPE®2.0 Linear

Preliminary

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 2 of 10

TABLE OF CONTENTS

For your own safety and that of the product, please read this conﬁguration guide

carefully before beginning setup and installation.

1. INTRODUCTION 3

2. CONNECTION 3

2.1 TOOLS 3

2.2 TYPICAL CONNECTION DIAGRAM (WITH BUTLER S2) 3

3. E:CUE PROGRAMMER CONFIGURATION 4

4. AUTO-ADDRESSING 6

4.1 EXPERT SETUP 6

4.2 AUTO-ADDRESSING CONFIGURATION 7

5. RDM CONFIGURATION (OPTIONAL) 9

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 3 of 10

1. INTRODUCTION

ARCHISHAPE®2.5 Washer and ARCHISHAPE®2.0 Linear allow users to conﬁgure the

luminaire through the e:cue programmer easily. Major feature that can be conﬁgured include:

• DMX Auto-addressing

2. CONNECTION

2.1 Tools

• e:cue Programmer (part of Lighting Application Suite, need USB dongle to use ActionPad)

• Butler S2

2.2 Typical Connection Diagram (with Butler S2)

FIG.1: Typical Connection Diagram (with Butler S2)

Butler S2e:cue Programmer

Butler S2

DMX/RDMOutput Engine

e:net DMX512

~Mains AC ~Mains AC

RJ45 Plug

Pin 2: DMX+

Pin 3: GND

Pin 1: DMX–

DC Power Supply

GND

(Yellow/Green)

DMX−

(Blue)

DMX+

(Brown) ARCHISHAPE®2.0 Linear

ARCHISHAPE®2.5 Washer

Luminaire

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 4 of 10

3. E:CUE PROGRAMMER CONFIGURATION

1. Open e:cue Programmer (V7.0 or higher).

2. Go to “Application Options” under the “Advanced” top menu.

3. Click “Advanced”.

4. Make sure the “e:net” setting is in the same network for Butler S2. For example, if IP

of Butler S2 is 172.16.17.201, then the IP of host computer should be 172.16.17.XXX,

which XXX can be any values from 1 to 254.

FIG.2: Application Options

5. Click “Device Manager”.

FIG.3: Device Manager

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 5 of 10

6. Click “Automatic Device Setup Wizard”, then click “OK” if the Butler S2 is detected:

FIG.4: Auto Setup

7. Then the Butler S2 will be “Online” in “Device Manager”.

FIG.5: Device Manager

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 6 of 10

4. AUTO-ADDRESSING

4.1 Expert Setup

1. Select “Application Suite” > “Toolbox”.

FIG.6: Toolbox

2. Click “Expert Setup”.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 7 of 10

FIG.7: Expert Setup

3. Set “universe_max” to 128 and “desk_channel_max” to 65536.

4. Click “OK”.

4.2 Auto-addressing Conﬁguration

1. Open a show ﬁle and detect any online device in the “Device Manager”.

2. Click the “Auto Detect Wizard” icon, and then set the detected device as the output

device.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 8 of 10

FIG.8: Auto Setup

3. Right-click and select “Properties” to check each device properties.

The output universe should be 1 and other universes should start from 2. The number

increases when more devices are connected.

FIG.9: Device Properties

4. Click “OK”.

5. Press CTRL + F2 to open the Action Pad.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DMX/RDM Conﬁguraion Guide 07/19 / V0.1 9 of 10

FIG.10: Action Pad

6. Enter the DMX Address and Number of DMX Universe.

7. Click “Patch”.

The Patch button turns orange.

8. Click “Set Cmd” and wait for a few seconds.

9. Click “Send Cmd” and wait for a few seconds.

When the auto-addressing is complete, the ﬁrst 16 DMX channels of each universe

should be 128. The ﬁxtures will turn on accordingly.

5. RDM CONFIGURATION (OPTIONAL)

1. Click “RDM Manager”, all ports are default disabled with RDM function.

2. Right click “Butler2”, then select “Enable RDM”.

3. The interface will then list out all RDM devices connected to the Butler S2:

FIG.11: RDM Manager

NOTE: RDM configuration only supports the luminaires with RDM function.

Information is subject to change without prior notice.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Osram Beleuchtungsausrüstung Handbücher

Osram

Osram ZELION HL300 Grow Light Bedienungsanleitung

Osram

Osram Traxon e:cue Allegro Media Tube Lite Bedienungsanleitung

Osram

Osram OTi50W Leitfaden

Osram

Osram ARAY CTFI1100SARAY-G1-FS927-05-1L-50 Bedienungsanleitung

Osram

Osram Traxon e:cue Allegro Media Tube Lite Installationsanleitung

Osram

Osram TRAXON Media Pixel Ribbon DMX Outdoor Flat Installationsanleitung

Osram

Osram PL-CN35-COB-600-XXX-24D-G2 Bedienungsanleitung

Osram

Osram AirZing PRO 5030 UNIV Benutzerhandbuch

Osram

Osram Media Pixel Ribbon DMX Outdoor VB Installationsanleitung

Osram

Osram DALI PCU Bedienungsanleitung

Osram

Osram LINEARlight FLEX Protect POWER Series Bedienungsanleitung

Osram

Osram Clay Paky ALPHA PROFILE 1500 Bedienungsanleitung

Osram

Osram SubstiTUBE T5 HF Bedienungsanleitung

Osram

Osram Fluence VYPR 3p Fehlerbehebungshandbuch

Osram

Osram Inventronics DALI COUPLER LS HIGHBAY G2 Bedienungsanleitung

Osram

Osram 660 Bedienungsanleitung

Osram

Osram ADB KLEMANTIS AS 1000 Bedienungsanleitung

Osram

Osram LEDinspect POCKET 200 Bedienungsanleitung

Osram

Osram PermaLED® Area Light Medium Bedienungsanleitung

Osram

Osram Traxon e:cue ProPoint Kontour Narrow RGB Bedienungsanleitung

Osram

Osram traxon ecue ARCHISHAPE 2.0 Dot S Bedienungsanleitung

Osram

Osram LEDambient LEDINT203 Bedienungsanleitung

Osram

Osram Claypaky MINI XTYLOS Bedienungsanleitung

Osram

Osram 4920Z Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung