Oventrop REGTRONIC PX Bedienungsanleitung

INSTRUCTIONS FOR

INSTALLERS

Oventrop

REGTRONIC PX

Important!

Please read the instructions carefully before installing and operating the unit!

Failure to do this can void product warranty!

Please keep the instructions in a safe place!

This unit described has been manufactured and inspected according to CE

regulations.

Instructions for installers REGTRONIC PX

Instructions for installers 136105184 2 1317ZB003-10B-E, Revised 04/2008

REGTRONIC PX

Parameters set using the System Settings menu should only be

configured or modified by installers or qualified technical personnel.

Setting the wrong parameters can compromise the functionality of the

control unit and solar system

Table of contents:

1"SYSTEM SETTINGS" MENU“/ CHANGES TO THE SYSTEM ........................ 3

2USING A DATASTICK

...................................................................................... 4

2.1 F

ACTORY SETTINGS

........................................................................................ 4

2.1.1 Restoring factory settings......................................................................... 4

2.1.2 Saving/loading configuration parameters.................................................. 4

2.2 U

PDATING SYSTEM SOFTWARE

......................................................................... 4

Instructions for installers REGTRONIC PX

Instructions for installers 136105184 3 1317ZB003-10B-E, Revised 04/2008

REGTRONIC PX

1 "S

YSTEM

ETTINGS

“/

HANGES

TO THE SYSTEM

During normal operation, the "System

Settings" menu only displays

parameters and does not allow them to

be altered. This prevents accidental

changes. To change parameters, this

menu must be selected within one

minute of switching on the unit.

While the system is running, changes

can be made using the System

Settings menu by pressing the top

, bottom and right-hand

button simultaneously.

Once the user is in the menu, no time

limits apply.

The System Settings menu "locks"

itself automatically one minute after

the unit has been switched on and

one minute after the user has exited

the menu.

The System Settings menu is used to

select the basic schema and the

language, and also to activate or

deactivate the available protective and

ancillary features. The buttons

and are used to page through

the various submenus. The status –

e.g. "On" or "Off" – is also shown next

to the name of each submenu.

Submenus are selected by using the

button.

Allocation of layout no. to system number: X1010 = 3301, X1020 = 3302, X1030 =

3303, X2010 = 3304, X2020 = 3305, X2030 = 3306.

Note: 3300 is the initial software set!

Example: change system 3300 to 3301

System sel.

[off]

off

System

3300

off ok

3300 3301 ok

Service

[off]

MultiReg3

[off]

Instructions for installers REGTRONIC PX

Instructions for installers 136105184 4 1317ZB003-10B-E, Revised 04/2008

REGTRONIC PX

2 U

SING A

ATA

TICK

An installer or technician can use a DataStick

for the following tasks:

Updating unit parameters

Saving/loading factory settings

Updating system software

2.1 Factory settings

Factory settings can be saved, loaded

or restored in the "System Settings"

menu.

This also makes it possible to transfer

configuration data from one control unit

to another, for example.

2.1.1 Restoring factory settings

Menu item "Factory settings":

•Off

•On: Restores the default factory settings

2.1.2 Saving/loading configuration parameters

Menu item "Factory settings" Parameters:

Only insert or remove the DataStick

at this menu. If the DataStick

has been

previously used as a programming stick, then other menus in the system will ask the

user if the software on the DataStick

should be loaded! Parameter backups on the

stick will not have this effect.

•Off

•Save

•Stick available: Message "OK"

-Stick unavailable: Message "OK" (the data will be sent, although it

cannot be stored)

•Load

-Stick available, system no. and system version on the stick match the

data in the control unit: Message "OK"

-Stick available, system no. on the stick matches the data in the control

unit, but the version is different: Message "Chk. par."

: the installer needs to check and verify the parameters.

-System no. does not match the system no. in the control unit: Message

"Error"

2.2 Updating system software

First, insert the DataStick. If the

DataStick contains a software package

that is valid for this unit, then the

screen will display "Copy DataStick

start?". Press the "OK" button twice to

confirm, and the copy process will

start. Once copying has finished, the

unit will ask you to remove the

DataStick. The control unit will then

reboot.

Andere Handbücher für REGTRONIC PX

Andere oventrop Controller Handbücher

oventrop

oventrop DN 15 Bedienungsanleitung

oventrop

oventrop Regtronic KM IP Bedienungsanleitung

oventrop

oventrop Aktor M ST L Bedienungsanleitung

oventrop

oventrop EnOcean Aktor MH CON B Bedienungsanleitung

oventrop

oventrop REGTRONIC PC Bedienungsanleitung

oventrop

oventrop REGTRONIC PM Bedienungsanleitung

oventrop

oventrop Aktor M ST L Bedienungsanleitung

oventrop

oventrop Regtronic RX Bedienungsanleitung

oventrop

oventrop Hydromat DTR Bedienungsanleitung

oventrop

oventrop R-Tronic Bedienungsanleitung

oventrop

oventrop Regumaq K Bedienungsanleitung

oventrop

oventrop ENOCEAN R-Tronic RT B Bedienungsanleitung

oventrop

oventrop Aktor M ST Bedienungsanleitung

oventrop

oventrop Unibox E RTL Bedienungsanleitung

oventrop

oventrop Regtronic RH HT Betriebsanleitung

oventrop

oventrop NR 24 Bedienungsanleitung

oventrop

oventrop Hydromat DFC Betriebsanleitung

oventrop

oventrop Aktor M ST/2P L Bedienungsanleitung

oventrop

oventrop Regtronic RM Betriebsanleitung

oventrop

oventrop Unibox RTL Bedienungsanleitung

oventrop

oventrop NR 230 Bedienungsanleitung

oventrop

oventrop Hydromat DTR Series Bedienungsanleitung

oventrop

oventrop 1158021 Bedienungsanleitung

oventrop

oventrop R-Tronic RT B Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

oventrop REGTRONIC PX Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken